BPanther's Neutrino Forum

I use here only Uni/Jess and this works - if I use both tuner inputs. Only one connection does also not work here.

And if you switch the cables and configs of A1<->A2?

Set tuner 1 to Independent how the tuner 2. Master only if the other a slave (twin/loop).

May only some small changes needed, but the most functions should now working. That's good.

BTW: The DM7080 LCD has 132x64x8 - the internal lcd driver tells me this.

I know, I have removed the 3 images and build current new one - testet with DM7080. Also fixed for the DM7080/820/900/920: The serial log with the mini usb connection also now working. EDIT: DM7080 done and working. Also fixed the online update (if flash installed). Don't use it with older versions....

New experimental images uploaded for dm7080, dm900 and dm920. If installed in flash just update per online update (service menu). Hope the tuner works now right. I have tryed to adapt the e2 patch, but also the 3 lines before neutrino starting used.

This is more than strage. As I sayed, these are the defaults after box start and already set. The user can try if these 3 command also work if he write them to the file /var/etc/vorneutrino.sh. If this working, then we have a workaround. The attached new binary for the dm920 should do the same. And ...

I'm afraid, the user with the problems uses only 1 connection at the tuner, right? This problem I have here also. I MUST use both inputs at the tuner or I have no signal. With Unicable/Jess here no problem...

Here a short change. But strange, that the dm900 work and the dm920 not same for dm820<->dm7080. But I think there's an other problem which has nothing to do with the CI control.

The patch sets only the same values again. You can do this also via telnet.
Does this change anything?

But I must not set anything if the default the same?!

This is only for the CI modul, not for the tuner itself. The default is for input 1 = A1, so we must not set anything. dm900:~# cat /proc/stb/tsmux/ci0_input A1 dm900:~# cat /proc/stb/tsmux/ci0_input_choices A1 A2 dm900:~# cat /proc/stb/tsmux/input0 A1 dm900:~# cat /proc/stb/tsmux/input0_choices A1 ...

atef 0 hat geschrieben: ↑Di 4. Jun 2024, 18:13...the solution is the same as the patch I attached before

Hmm, which patch?

The box has the same tuner how the dm900 - this should work. Also the LCD should work, the dm900 and dm920 are not really different (Flash 4GB -> 8GB and 1 CI more). The kernel is not from the image.

Thanks.

nim_sockets: The (internal) tuner is OK, driver loaded and should work.
/dev/fb*: No other "framebuffer device", the lcd is also not here. OK. Maybe in a few days I have a test box and I can show it by myself.
kernel: It's an other kernel, not from my image - but should work.

I've forgot the cat /proc/bus/nim_sockets and ls -1r /dev/fb* - but all very strange, because all modules are correct loaded. The kernel config is the same, and I hope, he uses the right kernel ( cat /proc/version ). The Images only FLASH testet, not outside. I think we need more users with a DM7080...