Freezing of the picture problem
- maleboya
- Registrierte Benutzer
- Beiträge: 474
- Registriert: Sa 27. Aug 2011, 19:07
- Wohnort: Duisburg
- Hat sich bedankt: 0
- Danksagung erhalten: 0
Re: Freezing of the picture problem
As mentioned befor, ive got hdmi sync problems with my lg55lm660 too. It happens on fta and crypted channels, with or without a running cam. It happens not all the time, but mostly at upscaled 4:3 channels. I could force this symptom by switching the colortype too. Its on a 913 with image of 14.04.
sorry, my english is under all pig
sorry, my english is under all pig
Best regards,
1x UFS 910 - 320GB Sata - Gelbe LED - NMP
1x UFS 913 - 32GB SSD - NMP
1x UFS 913 - Orig FW
1x AV 7000 - 160GB Sata -Neutrino V1
1x UFS 910 - 320GB Sata - Gelbe LED - NMP
1x UFS 913 - 32GB SSD - NMP
1x UFS 913 - Orig FW
1x AV 7000 - 160GB Sata -Neutrino V1
- BPanther
- Administrator
- Beiträge: 13417
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 659 Mal
- Danksagung erhalten: 1364 Mal
- Kontaktdaten:
Re: Freezing of the picture problem
Hmm, this change is only for "Spark", not for this boxtype. But I can try to activate this also for testing.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
- maleboya
- Registrierte Benutzer
- Beiträge: 474
- Registriert: Sa 27. Aug 2011, 19:07
- Wohnort: Duisburg
- Hat sich bedankt: 0
- Danksagung erhalten: 0
Re: Freezing of the picture problem
does only the stream of the current channel disapear? couse when i change the color typ or when the desyncs happen also the menu is gone. strang is, that sometime the sounds still working in this desync gaps.
Best regards,
1x UFS 910 - 320GB Sata - Gelbe LED - NMP
1x UFS 913 - 32GB SSD - NMP
1x UFS 913 - Orig FW
1x AV 7000 - 160GB Sata -Neutrino V1
1x UFS 910 - 320GB Sata - Gelbe LED - NMP
1x UFS 913 - 32GB SSD - NMP
1x UFS 913 - Orig FW
1x AV 7000 - 160GB Sata -Neutrino V1
- DboxOldie
- Co-Admin
- Beiträge: 5421
- Registriert: Sa 6. Aug 2011, 15:21
- Hat sich bedankt: 79 Mal
- Danksagung erhalten: 295 Mal
Re: Freezing of the picture problem
The function you have posted is the reaction for lost tuner lock, not the reason.
The question is: why lose the tuner the signal...
By the way: I think your TV has an build in tuner for sat, as my Samsung has it.
Have you connect it whith a sat cable ?
The question is: why lose the tuner the signal...
By the way: I think your TV has an build in tuner for sat, as my Samsung has it.
Have you connect it whith a sat cable ?
- DboxOldie
- Co-Admin
- Beiträge: 5421
- Registriert: Sa 6. Aug 2011, 15:21
- Hat sich bedankt: 79 Mal
- Danksagung erhalten: 295 Mal
Re: Freezing of the picture problem
I have a diablo wifi, and it works fine with my Samsung...
But : the CI Slot on my TV there is enough place, I have seen on newer samsungs that there ist only possible to use normal format of CI moduls,
and not the longer ones like the wifi.
Once more the question: is your tv connected to your sat dish ?
But : the CI Slot on my TV there is enough place, I have seen on newer samsungs that there ist only possible to use normal format of CI moduls,
and not the longer ones like the wifi.
Once more the question: is your tv connected to your sat dish ?
- DboxOldie
- Co-Admin
- Beiträge: 5421
- Registriert: Sa 6. Aug 2011, 15:21
- Hat sich bedankt: 79 Mal
- Danksagung erhalten: 295 Mal
Re: Freezing of the picture problem
Well, then try to test: switching on / off your TV without connected sat cable to make shure that the effect is only on the hdmi Connection.
The DBW is the older one rev 2.13 ?? with UW 2.18
The DBW is the older one rev 2.13 ?? with UW 2.18
- maleboya
- Registrierte Benutzer
- Beiträge: 474
- Registriert: Sa 27. Aug 2011, 19:07
- Wohnort: Duisburg
- Hat sich bedankt: 0
- Danksagung erhalten: 0
Re: Freezing of the picture problem
Then i think we have got two different problems, because at my tv the hdmi Signal is lost vor a couple of seconds including the menu and most of the time the sound via hdmi is gone too. Your Problem sounds like an tuner Problem. Got this freezing prob with my old 7000, i fixed it by doing al settings, including the channel list from scratch. But you said, that its an emu Problem, so why dont you change the emu?
Best regards,
1x UFS 910 - 320GB Sata - Gelbe LED - NMP
1x UFS 913 - 32GB SSD - NMP
1x UFS 913 - Orig FW
1x AV 7000 - 160GB Sata -Neutrino V1
1x UFS 910 - 320GB Sata - Gelbe LED - NMP
1x UFS 913 - 32GB SSD - NMP
1x UFS 913 - Orig FW
1x AV 7000 - 160GB Sata -Neutrino V1
- maleboya
- Registrierte Benutzer
- Beiträge: 474
- Registriert: Sa 27. Aug 2011, 19:07
- Wohnort: Duisburg
- Hat sich bedankt: 0
- Danksagung erhalten: 0
Re: Freezing of the picture problem
Ok, than i habe missundestood The thing with The Emu
but your menu an infobar is still responding during The freezes?
but your menu an infobar is still responding during The freezes?
Best regards,
1x UFS 910 - 320GB Sata - Gelbe LED - NMP
1x UFS 913 - 32GB SSD - NMP
1x UFS 913 - Orig FW
1x AV 7000 - 160GB Sata -Neutrino V1
1x UFS 910 - 320GB Sata - Gelbe LED - NMP
1x UFS 913 - 32GB SSD - NMP
1x UFS 913 - Orig FW
1x AV 7000 - 160GB Sata -Neutrino V1
- maleboya
- Registrierte Benutzer
- Beiträge: 474
- Registriert: Sa 27. Aug 2011, 19:07
- Wohnort: Duisburg
- Hat sich bedankt: 0
- Danksagung erhalten: 0
Re: Freezing of the picture problem
Okay, than The hdmi is still in sync. But it only occurs on This tv? Do You habe cec enabled on The tv?
Best regards,
1x UFS 910 - 320GB Sata - Gelbe LED - NMP
1x UFS 913 - 32GB SSD - NMP
1x UFS 913 - Orig FW
1x AV 7000 - 160GB Sata -Neutrino V1
1x UFS 910 - 320GB Sata - Gelbe LED - NMP
1x UFS 913 - 32GB SSD - NMP
1x UFS 913 - Orig FW
1x AV 7000 - 160GB Sata -Neutrino V1
- DboxOldie
- Co-Admin
- Beiträge: 5421
- Registriert: Sa 6. Aug 2011, 15:21
- Hat sich bedankt: 79 Mal
- Danksagung erhalten: 295 Mal
Re: Freezing of the picture problem
Yes all use the same Basics, especially the player2....
There are some parts in the souce for using the hdmi, I think your TV model produce a strange Signal when switching off / on, which causes this fault.
You are using neutrino V2 (MP), perhaps there are additional infos in the log by enabling this:
export HAL_DEBUG=0x03
Put this term into the rcS and the log of things depending on "Video" "Audio" shows more.
There are some parts in the souce for using the hdmi, I think your TV model produce a strange Signal when switching off / on, which causes this fault.
You are using neutrino V2 (MP), perhaps there are additional infos in the log by enabling this:
export HAL_DEBUG=0x03
Put this term into the rcS and the log of things depending on "Video" "Audio" shows more.
- DboxOldie
- Co-Admin
- Beiträge: 5421
- Registriert: Sa 6. Aug 2011, 15:21
- Hat sich bedankt: 79 Mal
- Danksagung erhalten: 295 Mal
Re: Freezing of the picture problem
Very strange...when you always had to make a new scan after deep standby.
I never heard this before....
I use old os versions 6089 and 63xx which works well. Although the newer ones works too, but it makes no sense because they are bigger
and my cards (S02 , HD02 ) are working well with the old versions.
I never heard this before....
I use old os versions 6089 and 63xx which works well. Although the newer ones works too, but it makes no sense because they are bigger
and my cards (S02 , HD02 ) are working well with the old versions.
- BPanther
- Administrator
- Beiträge: 13417
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 659 Mal
- Danksagung erhalten: 1364 Mal
- Kontaktdaten:
Re: Freezing of the picture problem
The Log does not give really infos about the problem except the "lost signal" but not why. :-\
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
- BPanther-Mobil
- Registrierte Benutzer
- Beiträge: 582
- Registriert: Di 2. Aug 2011, 08:27
- Hat sich bedankt: 2 Mal
- Danksagung erhalten: 31 Mal
Re: Freezing of the picture problem
See the portal, Rev5671 is the current NMP version for multi tuner.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Tnx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x DM8000
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)),
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Tnx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x DM8000
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)),
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
- BPanther
- Administrator
- Beiträge: 13417
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 659 Mal
- Danksagung erhalten: 1364 Mal
- Kontaktdaten:
Re: Freezing of the picture problem
I use a the last real version 1.35 of mgcamd. oscam is build by myself only for smargo reader (no active dvbapi).
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)