Sh4 Fortis family
-
- Registrierte Benutzer
- Beiträge: 44
- Registriert: Sa 8. Jun 2019, 12:47
- Hat sich bedankt: 22 Mal
- Danksagung erhalten: 5 Mal
Re: Sh4 Fortis family
Because these devices are outdated
No developer available
It was only you who made it so far
No developer available
It was only you who made it so far
- BPanther
- Administrator
- Beiträge: 13513
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 690 Mal
- Danksagung erhalten: 1607 Mal
- Kontaktdaten:
Re: Sh4 Fortis family
This was only a quick test with the datas from the git and some changes who I'm think they works - but they don't. Sorry, but I can't change something "blind" because I don't know whats wrong at the kernel.
You have working kernels but nobody knows the config? Very strange, but other hand, here the datas are also very old and I don't know who has these put into the git.
You have working kernels but nobody knows the config? Very strange, but other hand, here the datas are also very old and I don't know who has these put into the git.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM820, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM820, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
- BPanther
- Administrator
- Beiträge: 13513
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 690 Mal
- Danksagung erhalten: 1607 Mal
- Kontaktdaten:
Re: Sh4 Fortis family
Ok, 2 Kernel files again - but thats the last try.
EDIT: Not working, removed...
EDIT: Not working, removed...
- Folgende Benutzer bedankten sich beim Autor BPanther für den Beitrag (Insgesamt 2):
- sadaghiani (Do 22. Aug 2019, 08:01) • many2 (Do 22. Aug 2019, 10:03)
- Bewertung: 14.29%
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM820, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM820, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
-
- Registrierte Benutzer
- Beiträge: 44
- Registriert: Sa 8. Jun 2019, 12:47
- Hat sich bedankt: 22 Mal
- Danksagung erhalten: 5 Mal
Re: Sh4 Fortis family
Thank you very much for your attention and effort
--------------------------------------------------------------
hs-image uImage_debug :
--------------------------------------------------------------
hs-image uImage_debug :
Code: Alles auswählen
FrTs
'0(Re)start USB...
Front USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
system volume information/
1964907 uimage
268435456 root.img
2 file(s), 1 dir(s)
reading uImage
...............................................................................................................................................................................................
ret=> 1964907
Linux version 2.6.32.71_stm24_0217 (bpanther@Neutrino) (gcc version 4.8.4 20141219 (STMicroelectronics/Linux Base 4.8.4-139) (GCC) ) #1 PREEMPT Wed Aug 21 20:57:28 CEST 2019
Boot params:
... MOUNT_ROOT_RDONLY - 00000001
... RAMDISK_FLAGS - 00000000
... ORIG_ROOT_DEV - 00000200
... LOADER_TYPE - 00000000
... INITRD_START - 00000000
... INITRD_SIZE - 00000000
Booting machvec: STx7111 HDK
Node 0: start_pfn = 0x40000, low = 0x50000
Zone PFN ranges:
Normal 0x00040000 -> 0x00050000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00040000 -> 0x00050000
Fortis HS7429 main board initialisation
STx7111 version 3.x
bpa2: partition 'bigphysarea' created at 0x48000000, size 32768 kB (0x02000000 B)
bpa2: partition 'LMI_IO' created at 0x4a000000, size 98304 kB (0x06000000 B)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: console=ttyAS0,115200 root=/dev/sda2/root.img rootfstype=jffs2 rw nwhwconf=$nwhwnet init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 console_loglevel=7 rootdelay=5 stmmaceth=ethaddr:
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
PVR=04909200 CVR=60880000 PRR=00009a10
I-cache : n_ways=2 n_sets=512 way_incr=16384
I-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Memory: 117120k/262144k available (2518k kernel code, 687k data, 112k init)
Hierarchical RCU implementation.
NR_IRQS:600
Failed to enable clk CLKA_PLL0LS, ignoring
console [ttyAS0] enabled
sh_tmu: TMU0 used for clock events
sh_tmu: TMU0 used for periodic clock events
sh_tmu: TMU1 used as clock source
Calibrating delay loop... 444.41 BogoMIPS (lpj=222208)
Mount-cache hash table entries: 512
CPU: STx7111
NET: Registered protocol family 16
Configuring FLASH for boot-from-NAND
bio: create slab <bio-0> at 0
SCSI subsystem initialized
Generic PHY: Registered new driver (0xffffffff)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
DMA: Registering DMA API.
Switching to clocksource TMU1
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
fuse init (API version 7.13)
msgmni has been set to 228
io scheduler noop registered
io scheduler anticipatory registered (default)
STMicroelectronics ASC driver initialized
stm-asc.0: ttyAS0 at MMIO 0xfd032000 (irq = 121) is a stm-asc
stm-asc.1: ttyAS1 at MMIO 0xfd034000 (irq = 274) is a stm-asc
loop: module loaded
ONFI flash detected
ONFI param page 0 valid
NAND device: Manufacturer ID: 0x01, Chip ID: 0xda (AMD S34ML02G1)
stm-nand-flex: Using legacy platform timing data
cmdlinepart partition parsing not available
Creating 9 MTD partitions on "stm-nand-flex.0":
0x000000000000-0x000000400000 : "boot"
0x000000500000-0x000000800000 : "kernel"
0x000000800000-0x000006800000 : "rootfs"
0x000000000000-0x000008000000 : "NAND 2"
0x000008000000-0x000010000000 : "NAND 3"
0x000000400000-0x000000500000 : "config"
0x000006800000-0x00000f800000 : "user"
0x000000000000-0x000010000000 : "ALL"
0x00000f800000-0x00000fd00000 : "config1"
SMSC LAN83C185: Registered new driver (0x0007c0a0)
SMSC LAN8187: Registered new driver (0x0007c0b0)
SMSC LAN8700: Registered new driver (0x0007c0c0)
SMSC LAN911x Internal PHY: Registered new driver (0x0007c0d0)
SMSC LAN8710/LAN8720: Registered new driver (0x0007c0f0)
stmmac - user ID: 0x10, Synopsys ID: 0x33
No HW DMA feature register supported
Enhanced/Alternate descriptors
RX Checksum Offload Engine supported
TX Checksum insertion supported
Wake-Up On Lan supported
STMMAC MII Bus: probed
eth0: PHY ID 00000000 at 0 IRQ 0 (0:00)
eth0: PHY ID 00000000 at 1 IRQ 0 (0:01)
eth0: PHY ID 00008201 at 2 IRQ 0 (0:02) active
eth0: PHY ID 00000000 at 3 IRQ 0 (0:03)
eth0: PHY ID 00000000 at 4 IRQ 0 (0:04)
eth0: PHY ID 00000000 at 5 IRQ 0 (0:05)
eth0: PHY ID 00000000 at 6 IRQ 0 (0:06)
eth0: PHY ID 00000000 at 7 IRQ 0 (0:07)
eth0: PHY ID 00000000 at 8 IRQ 0 (0:08)
eth0: PHY ID 00000000 at 9 IRQ 0 (0:09)
eth0: PHY ID 00000000 at 10 IRQ 0 (0:0a)
eth0: PHY ID 00000000 at 11 IRQ 0 (0:0b)
eth0: PHY ID 00000000 at 12 IRQ 0 (0:0c)
eth0: PHY ID 00000000 at 13 IRQ 0 (0:0d)
eth0: PHY ID 00000000 at 14 IRQ 0 (0:0e)
eth0: PHY ID 00000000 at 15 IRQ 0 (0:0f)
eth0: PHY ID 00000000 at 16 IRQ 0 (0:10)
eth0: PHY ID 00000000 at 17 IRQ 0 (0:11)
eth0: PHY ID 00000000 at 18 IRQ 0 (0:12)
eth0: PHY ID 00000000 at 19 IRQ 0 (0:13)
eth0: PHY ID 00000000 at 20 IRQ 0 (0:14)
eth0: PHY ID 00000000 at 21 IRQ 0 (0:15)
eth0: PHY ID 00000000 at 22 IRQ 0 (0:16)
eth0: PHY ID 00000000 at 23 IRQ 0 (0:17)
eth0: PHY ID 00000000 at 24 IRQ 0 (0:18)
eth0: PHY ID 00000000 at 25 IRQ 0 (0:19)
eth0: PHY ID 00000000 at 26 IRQ 0 (0:1a)
eth0: PHY ID 00000000 at 27 IRQ 0 (0:1b)
eth0: PHY ID 00000000 at 28 IRQ 0 (0:1c)
eth0: PHY ID 00000000 at 29 IRQ 0 (0:1d)
eth0: PHY ID 00000000 at 30 IRQ 0 (0:1e)
eth0: PHY ID 00000000 at 31 IRQ 0 (0:1f)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
stm-ehci stm-ehci.0: STMicroelectronics EHCI Host Controller
stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
stm-ehci stm-ehci.0: irq 169, io mem 0xfe1ffe00
stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
stm-ohci stm-ohci.0: STMicroelectronics OHCI Host Controller
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
Linux video capture interface: v2.00
sh_tmu: TMU0 kept as earlytimer
sh_tmu: TMU1 kept as earlytimer
STMicroelectronics - Coprocessors st231 Init
st231.0 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xbf000000 size 0x00400000
cop. addr 0x40000000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
st231.1 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xbf400000 size 0x00400000
cop. addr 0x40400000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
DMA: Registering fdma_dmac.0 handler (16 channels).
IRQ 140/fdma_dmac.0: IRQF_DISABLED is not guaranteed on shared IRQs
DMA: Registering fdma_dmac.1 handler (16 channels).
stm-fdma stm-fdma.0: firmware: using built-in firmware fdma_STx7111_0.elf
platform fdma_dmac.0: SLIM hw 0.0, FDMA fw 2.3
IRQ 141/fdma_dmac.1: IRQF_DISABLED is not guaranteed on shared IRQs
stm-fdma stm-fdma.1: firmware: using built-in firmware fdma_STx7111_1.elf
platform fdma_dmac.1: SLIM hw 0.0, FDMA fw 2.6
stm-rng hardware driver 1.0 configured
Advanced Linux Sound Architecture Driver Version 1.0.21.
ALSA device list:
#0: STMicroelectronics STx7111 cut 3.x SOC audio subsystem
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Waiting 5sec before mounting root device...
usb 1-1: new high speed USB device using stm-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 2 ports detected
usb 1-1.2: new high speed USB device using stm-ehci and address 3
usb 1-1.2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "sda2/root.img" or unknown-block(2,0)
Please append a correct "root=" boot option; here are the available partitions:
1f00 4096 mtdblock0 (driver?)
1f01 3072 mtdblock1 (driver?)
1f02 98304 mtdblock2 (driver?)
1f03 131072 mtdblock3 (driver?)
1f04 131072 mtdblock4 (driver?)
1f05 1024 mtdblock5 (driver?)
1f06 147456 mtdblock6 (driver?)
1f07 262144 mtdblock7 (driver?)
1f08 5120 mtdblock8 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
- Folgende Benutzer bedankten sich beim Autor sadaghiani für den Beitrag:
- many2 (Do 22. Aug 2019, 10:03)
- Bewertung: 7.14%
-
- Registrierte Benutzer
- Beiträge: 44
- Registriert: Sa 8. Jun 2019, 12:47
- Hat sich bedankt: 22 Mal
- Danksagung erhalten: 5 Mal
Re: Sh4 Fortis family
hs-image uImage_ex34_separate
Code: Alles auswählen
FrTs
'0(Re)start USB...
Front USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
system volume information/
268435456 root.img
1890645 uimage
2 file(s), 1 dir(s)
reading uImage
........................................................................................................................................................................................
ret=> 1890645
- Folgende Benutzer bedankten sich beim Autor sadaghiani für den Beitrag:
- many2 (Do 22. Aug 2019, 10:01)
- Bewertung: 7.14%
- DboxOldie
- Co-Admin
- Beiträge: 5423
- Registriert: Sa 6. Aug 2011, 15:21
- Hat sich bedankt: 79 Mal
- Danksagung erhalten: 298 Mal
Re: Sh4 Fortis family
In your bootargs :
you want as root : /dev/sda2/root.img rootfstype=jffs2
I don´t know if it is right, and the kernel is able to mount an image file.....
Here later in kernel log:
the kernel recognize a mass storage device ( USB pen ??), but the scsi subsystem don´t recognize partitions like sda1, sda2.... and so on.
Perhaps you must increase the value in bootargs : rootdelay=5 to a higher one,
or may be better using the bootarg command : rootwait , then the kernel waits for mounting until the USB device is ready.
Code: Alles auswählen
Kernel command line: console=ttyAS0,115200 root=/dev/sda2/root.img rootfstype=jffs2 rw nwhwconf=$nwhwnet init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 console_loglevel=7 rootdelay=5 stmmaceth=ethaddr:
I don´t know if it is right, and the kernel is able to mount an image file.....
Here later in kernel log:
Code: Alles auswählen
Waiting 5sec before mounting root device...
usb 1-1: new high speed USB device using stm-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 2 ports detected
usb 1-1.2: new high speed USB device using stm-ehci and address 3
usb 1-1.2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "sda2/root.img" or unknown-block(2,0)
Perhaps you must increase the value in bootargs : rootdelay=5 to a higher one,
or may be better using the bootarg command : rootwait , then the kernel waits for mounting until the USB device is ready.
- Folgende Benutzer bedankten sich beim Autor DboxOldie für den Beitrag:
- sadaghiani (Do 22. Aug 2019, 15:54)
- Bewertung: 7.14%
- BPanther
- Administrator
- Beiträge: 13513
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 690 Mal
- Danksagung erhalten: 1607 Mal
- Kontaktdaten:
Re: Sh4 Fortis family
I think the debug kernel shows the problem:
Root is ext3 and not jffs2 because you don't really flash - root will only mountet. So I think the cmdline from bootloader is wrong.
Now HDMU Kernelkonfig from here used: https://github.com/HDMU/meta-sh4/blob/d ... /defconfig
I think this will also not work - but attached. If this also not working, I give up.
EDIT: Removed, not working...
Code: Alles auswählen
Kernel command line: console=ttyAS0,115200 root=/dev/sda2/root.img rootfstype=jffs2 rw nwhwconf=$nwhwnet init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 console_loglevel=7 rootdelay=5 stmmaceth=ethaddr:
Now HDMU Kernelkonfig from here used: https://github.com/HDMU/meta-sh4/blob/d ... /defconfig
I think this will also not work - but attached. If this also not working, I give up.
EDIT: Removed, not working...
- Folgende Benutzer bedankten sich beim Autor BPanther für den Beitrag:
- sadaghiani (Do 22. Aug 2019, 15:53)
- Bewertung: 7.14%
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM820, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM820, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
-
- Registrierte Benutzer
- Beiträge: 44
- Registriert: Sa 8. Jun 2019, 12:47
- Hat sich bedankt: 22 Mal
- Danksagung erhalten: 5 Mal
Re: Sh4 Fortis family
Code: Alles auswählen
FrTs
'0(Re)start USB...
Front USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
system volume information/
2106280 uimage
268435456 root.img
2 file(s), 1 dir(s)
reading uImage
.............................................................................................................................................................................................................
ret=> 2106280
Linux version 2.6.32.71_stm24_0217 (bpanther@Neutrino) (gcc version 4.8.4 20141219 (STMicroelectronics/Linux Base 4.8.4-139) (GCC) ) #1 PREEMPT Thu Aug 22 13:32:44 CEST 2019
Boot params:
... MOUNT_ROOT_RDONLY - 00000001
... RAMDISK_FLAGS - 00000000
... ORIG_ROOT_DEV - 00000200
... LOADER_TYPE - 00000000
... INITRD_START - 00000000
... INITRD_SIZE - 00000000
Booting machvec: STx7111 HDK
Node 0: start_pfn = 0x40000, low = 0x50000
Zone PFN ranges:
Normal 0x00040000 -> 0x00050000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00040000 -> 0x00050000
Fortis HS7429 main board initialisation
STx7111 version 3.x
bpa2: partition 'bigphysarea' created at 0x48000000, size 32768 kB (0x02000000 B)
bpa2: partition 'LMI_IO' created at 0x4a000000, size 98304 kB (0x06000000 B)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: console=ttyAS0,115200 root=/dev/sda2/root.img rootfstype=jffs2 rw nwhwconf=$nwhwnet init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 console_loglevel=7 rootdelay=5 stmmaceth=ethaddr:
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
PVR=04909200 CVR=60880000 PRR=00009a10
I-cache : n_ways=2 n_sets=512 way_incr=16384
I-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Memory: 116864k/262144k available (2698k kernel code, 751k data, 112k init)
Hierarchical RCU implementation.
NR_IRQS:600
Failed to enable clk CLKA_PLL0LS, ignoring
console [ttyAS0] enabled
sh_tmu: TMU0 used for clock events
sh_tmu: TMU0 used for periodic clock events
sh_tmu: TMU1 used as clock source
Calibrating delay loop... 444.41 BogoMIPS (lpj=222208)
Mount-cache hash table entries: 512
CPU: STx7111
devtmpfs: initialized
NET: Registered protocol family 16
Configuring FLASH for boot-from-NAND
bio: create slab <bio-0> at 0
SCSI subsystem initialized
Generic PHY: Registered new driver (0xffffffff)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
DMA: Registering DMA API.
Switching to clocksource TMU1
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Slow work thread pool: Starting up
Slow work thread pool: Ready
fuse init (API version 7.13)
msgmni has been set to 228
io scheduler noop registered
io scheduler anticipatory registered (default)
STMicroelectronics ASC driver initialized
stm-asc.0: ttyAS0 at MMIO 0xfd032000 (irq = 121) is a stm-asc
stm-asc.1: ttyAS1 at MMIO 0xfd034000 (irq = 274) is a stm-asc
loop: module loaded
ONFI flash detected
ONFI param page 0 valid
NAND device: Manufacturer ID: 0x01, Chip ID: 0xda (AMD S34ML02G1)
stm-nand-flex: Using legacy platform timing data
cmdlinepart partition parsing not available
Creating 9 MTD partitions on "stm-nand-flex.0":
0x000000000000-0x000000400000 : "boot"
0x000000500000-0x000000800000 : "kernel"
0x000000800000-0x000006800000 : "rootfs"
0x000000000000-0x000008000000 : "NAND 2"
0x000008000000-0x000010000000 : "NAND 3"
0x000000400000-0x000000500000 : "config"
0x000006800000-0x00000f800000 : "user"
0x000000000000-0x000010000000 : "ALL"
0x00000f800000-0x00000fd00000 : "config1"
SMSC LAN83C185: Registered new driver (0x0007c0a0)
SMSC LAN8187: Registered new driver (0x0007c0b0)
SMSC LAN8700: Registered new driver (0x0007c0c0)
SMSC LAN911x Internal PHY: Registered new driver (0x0007c0d0)
SMSC LAN8710/LAN8720: Registered new driver (0x0007c0f0)
stmmac - user ID: 0x10, Synopsys ID: 0x33
No HW DMA feature register supported
Enhanced/Alternate descriptors
RX Checksum Offload Engine supported
TX Checksum insertion supported
Wake-Up On Lan supported
STMMAC MII Bus: probed
eth0: PHY ID 00000000 at 0 IRQ 0 (0:00)
eth0: PHY ID 00000000 at 1 IRQ 0 (0:01)
eth0: PHY ID 00008201 at 2 IRQ 0 (0:02) active
eth0: PHY ID 00000000 at 3 IRQ 0 (0:03)
eth0: PHY ID 00000000 at 4 IRQ 0 (0:04)
eth0: PHY ID 00000000 at 5 IRQ 0 (0:05)
eth0: PHY ID 00000000 at 6 IRQ 0 (0:06)
eth0: PHY ID 00000000 at 7 IRQ 0 (0:07)
eth0: PHY ID 00000000 at 8 IRQ 0 (0:08)
eth0: PHY ID 00000000 at 9 IRQ 0 (0:09)
eth0: PHY ID 00000000 at 10 IRQ 0 (0:0a)
eth0: PHY ID 00000000 at 11 IRQ 0 (0:0b)
eth0: PHY ID 00000000 at 12 IRQ 0 (0:0c)
eth0: PHY ID 00000000 at 13 IRQ 0 (0:0d)
eth0: PHY ID 00000000 at 14 IRQ 0 (0:0e)
eth0: PHY ID 00000000 at 15 IRQ 0 (0:0f)
eth0: PHY ID 00000000 at 16 IRQ 0 (0:10)
eth0: PHY ID 00000000 at 17 IRQ 0 (0:11)
eth0: PHY ID 00000000 at 18 IRQ 0 (0:12)
eth0: PHY ID 00000000 at 19 IRQ 0 (0:13)
eth0: PHY ID 00000000 at 20 IRQ 0 (0:14)
eth0: PHY ID 00000000 at 21 IRQ 0 (0:15)
eth0: PHY ID 00000000 at 22 IRQ 0 (0:16)
eth0: PHY ID 00000000 at 23 IRQ 0 (0:17)
eth0: PHY ID 00000000 at 24 IRQ 0 (0:18)
eth0: PHY ID 00000000 at 25 IRQ 0 (0:19)
eth0: PHY ID 00000000 at 26 IRQ 0 (0:1a)
eth0: PHY ID 00000000 at 27 IRQ 0 (0:1b)
eth0: PHY ID 00000000 at 28 IRQ 0 (0:1c)
eth0: PHY ID 00000000 at 29 IRQ 0 (0:1d)
eth0: PHY ID 00000000 at 30 IRQ 0 (0:1e)
eth0: PHY ID 00000000 at 31 IRQ 0 (0:1f)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
stm-ehci stm-ehci.0: STMicroelectronics EHCI Host Controller
stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
stm-ehci stm-ehci.0: irq 169, io mem 0xfe1ffe00
stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
stm-ohci stm-ohci.0: STMicroelectronics OHCI Host Controller
stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
Linux video capture interface: v2.00
sh_tmu: TMU0 kept as earlytimer
sh_tmu: TMU1 kept as earlytimer
STMicroelectronics - Coprocessors st231 Init
st231.0 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xbf000000 size 0x00400000
cop. addr 0x40000000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
st231.1 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xbf400000 size 0x00400000
cop. addr 0x40400000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
DMA: Registering fdma_dmac.0 handler (16 channels).
IRQ 140/fdma_dmac.0: IRQF_DISABLED is not guaranteed on shared IRQs
stm-fdma stm-fdma.0: firmware: using built-in firmware fdma_STx7111_0.elf
platform fdma_dmac.0: SLIM hw 0.0, FDMA fw 2.3
DMA: Registering fdma_dmac.1 handler (16 channels).
IRQ 141/fdma_dmac.1: IRQF_DISABLED is not guaranteed on shared IRQs
stm-rng hardware driver 1.0 configured
stm-fdma stm-fdma.1: firmware: using built-in firmware fdma_STx7111_1.elf
platform fdma_dmac.1: SLIM hw 0.0, FDMA fw 2.6
Advanced Linux Sound Architecture Driver Version 1.0.21.
ALSA device list:
#0: STMicroelectronics STx7111 cut 3.x SOC audio subsystem
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Waiting 5sec before mounting root device...
usb 1-1: new high speed USB device using stm-ehci and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 2 ports detected
usb 1-1.2: new high speed USB device using stm-ehci and address 3
usb 1-1.2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "sda2/root.img" or unknown-block(2,0)
Please append a correct "root=" boot option; here are the available partitions:
1f00 4096 mtdblock0 (driver?)
1f01 3072 mtdblock1 (driver?)
1f02 98304 mtdblock2 (driver?)
1f03 131072 mtdblock3 (driver?)
1f04 131072 mtdblock4 (driver?)
1f05 1024 mtdblock5 (driver?)
1f06 147456 mtdblock6 (driver?)
1f07 262144 mtdblock7 (driver?)
1f08 5120 mtdblock8 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(2,0)
-
- Registrierte Benutzer
- Beiträge: 44
- Registriert: Sa 8. Jun 2019, 12:47
- Hat sich bedankt: 22 Mal
- Danksagung erhalten: 5 Mal
Re: Sh4 Fortis family
Is it possible to use this config?
---------------------------------------------
https://github.com/HDMU/meta-sh4/tree/d ... h4/hs7810a
---------------------------------------------
https://github.com/HDMU/meta-sh4/tree/d ... h4/hs7810a
- BPanther
- Administrator
- Beiträge: 13513
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 690 Mal
- Danksagung erhalten: 1607 Mal
- Kontaktdaten:
Re: Sh4 Fortis family
But this is not a 7429! If all 3 similar, why then different kernel configs? Very strange devices...
EDIT: Removed, not working.
EDIT: Removed, not working.
- Folgende Benutzer bedankten sich beim Autor BPanther für den Beitrag:
- sadaghiani (Do 22. Aug 2019, 17:25)
- Bewertung: 7.14%
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM820, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM820, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
-
- Registrierte Benutzer
- Beiträge: 44
- Registriert: Sa 8. Jun 2019, 12:47
- Hat sich bedankt: 22 Mal
- Danksagung erhalten: 5 Mal
Re: Sh4 Fortis family
Thankful
-------------------------------------
-------------------------------------
Code: Alles auswählen
FrTs
'0(Re)start USB...
Front USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
system volume information/
2083366 uimage
262144000 root.img
2 file(s), 1 dir(s)
reading uImage
...........................................................................................................................................................................................................
ret=> 2083366
Linux version 2.6.32.71_stm24_0217 (bpanther@Neutrino) (gcc version 4.8.4 20141219 (STMicroelectronics/Linux Base 4.8.4-139) (GCC) ) #1 PREEMPT Thu Aug 22 16:37:11 CEST 2019
Boot params:
... MOUNT_ROOT_RDONLY - 00000001
... RAMDISK_FLAGS - 00000000
... ORIG_ROOT_DEV - 00000200
... LOADER_TYPE - 00000000
... INITRD_START - 00000000
... INITRD_SIZE - 00000000
Booting machvec: sat7111
Node 0: start_pfn = 0x40000, low = 0x50000
Zone PFN ranges:
Normal 0x00040000 -> 0x00050000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00040000 -> 0x00050000
STMicroelectronics sat7111 reference board initialisation
STx7111 version 3.x
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: console=ttyAS0,115200 root=/dev/sda2/root.img rootfstype=jffs2 rw nwhwconf=$nwhwnet init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 console_loglevel=7 rootdelay=5 stmmaceth=ethaddr:
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
PVR=04909200 CVR=60880000 PRR=00009a10
I-cache : n_ways=2 n_sets=512 way_incr=16384
I-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Memory: 247808k/262144k available (2659k kernel code, 781k data, 112k init)
Hierarchical RCU implementation.
NR_IRQS:600
Failed to enable clk CLKA_PLL0LS, ignoring
console [ttyAS0] enabled
sh_tmu: TMU0 used for clock events
sh_tmu: TMU0 used for periodic clock events
sh_tmu: TMU1 used as clock source
Calibrating delay loop... 445.44 BogoMIPS (lpj=222720)
Mount-cache hash table entries: 512
CPU: STx7111
devtmpfs: initialized
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
Generic PHY: Registered new driver (0xffffffff)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
DMA: Registering DMA API.
Switching to clocksource TMU1
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Slow work thread pool: Starting up
Slow work thread pool: Ready
NTFS driver 2.1.29 [Flags: R/O].
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.13)
JFS: nTxBlock = 1937, nTxLock = 15501
msgmni has been set to 484
io scheduler noop registered
io scheduler anticipatory registered (default)
STMicroelectronics ASC driver initialized
stm-asc.0: ttyAS0 at MMIO 0xfd032000 (irq = 121) is a stm-asc
stm-asc.1: ttyAS1 at MMIO 0xfd034000 (irq = 274) is a stm-asc
loop: module loaded
physmap platform flash device: 02000000 at 00000000
- BPanther
- Administrator
- Beiträge: 13513
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 690 Mal
- Danksagung erhalten: 1607 Mal
- Kontaktdaten:
Re: Sh4 Fortis family
Ok, also not working. You can try it by yourself with the git. Instead make neutrino-mp use make kernel, then only the kernel will be created at tufsbox/cdkroot. I give up. Sorry...
- Folgende Benutzer bedankten sich beim Autor BPanther für den Beitrag:
- sadaghiani (Do 22. Aug 2019, 18:21)
- Bewertung: 7.14%
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM820, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM820, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
-
- Registrierte Benutzer
- Beiträge: 44
- Registriert: Sa 8. Jun 2019, 12:47
- Hat sich bedankt: 22 Mal
- Danksagung erhalten: 5 Mal
- BPanther
- Administrator
- Beiträge: 13513
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 690 Mal
- Danksagung erhalten: 1607 Mal
- Kontaktdaten:
Re: Sh4 Fortis family
You should ask "Audioniek" for an image. I have no such device, and we have already considered removing all 7xxx from the GIT, as obviously no working images are possible. In addition, there is only one flash script for the 7810a in IRD format (real flash image). Therefore, the 7xxx has never been fully implemented in the GIT.
- Folgende Benutzer bedankten sich beim Autor BPanther für den Beitrag:
- sadaghiani (Do 22. Aug 2019, 19:41)
- Bewertung: 7.14%
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM820, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM820, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
-
- Registrierte Benutzer
- Beiträge: 44
- Registriert: Sa 8. Jun 2019, 12:47
- Hat sich bedankt: 22 Mal
- Danksagung erhalten: 5 Mal
Re: Sh4 Fortis family
The audioneik image has been released
But they all fortis have the same kernel problem
----------------------------------------------------------------------------
http://ns504582.ip-198-245-62.net/board ... load/page3
But they all fortis have the same kernel problem
----------------------------------------------------------------------------
http://ns504582.ip-198-245-62.net/board ... load/page3