BPanther's Neutrino Forum

Another problem in neutrino
From the endowment on any channel of frequency channels 3900 C band of satellite industrial Intelsat 20 (IS-20) @ 68.5° East
The device freezes and does not respond to the remote control
Please fix the problem in the next release

http://www.flysat.com/is20.php







With the rest of the satellite frequencies working without any problem






Greetings

I don't have such LNB and also not this sat pos so I can't test this channels. Sorry...
But maybe I have something for testing, but this will take time...

BPanther hat geschrieben:I don't have such LNB and also not this sat pos so I can't test this channels. Sorry...
But maybe I have something for testing, but this will take time...

Thank you
I found a temporary solution to watch the package on the satellite
Next door Intelsat 17 @ 66 ° East

Please try the file attached one. Unzip and then copy the stv090x.ko to /lib/modules and reboot the receiver. The old one RENAME only, because if the new version not working so you can change to the old back.

EDIT: Attachment removed - not working.

BPanther hat geschrieben:Please try the file attached one. Unzip and then copy the stv090x.ko to /lib/modules and reboot the receiver. The old one RENAME only, because if the new version not working so you can change to the old back.

After sending the file and rebooting
The device gives this message and can not be skipped

Zapit initialiation failed.
This is a fatal error,sorry.

Can this be merged with the software without the error message

kernel-image_2.6.32-r14.8.15_spark.ipk

http://taapat.ho.ua/openpli/openpli-5/s ... _spark.ipk


kernel-vmlinux_2.6.32-r14.8.15_spark.ipk


http://taapat.ho.ua/openpli/openpli-5/s ... _spark.ipk

Your stx090x patched attached. If this not work you should wait a few days. You must not new flash if the driver not working, FTP is still working. Ignore the osd message loop, just copy the working one back and press OK-PWR-PWR-PWR-PWR-PWR-PWR-PWR-PWR - the receiver should after a few seconds rebooting. If not, power off/on...

I have current no time for a new driver because night shift. Maybe friday i find the time for an other test for you with a new driver, i have some patches found.

The spark files does not help, because not the same system base and only image files (no single files).

EDIT: Attachment removed...

BPanther hat geschrieben:Your stx090x patched attached. If this not work you should wait a few days. You must not new flash if the driver not working, FTP is still working. Ignore the osd message loop, just copy the working one back and press OK-PWR-PWR-PWR-PWR-PWR-PWR-PWR-PWR - the receiver should after a few seconds rebooting. If not, power off/on...

I have current no time for a new driver because night shift. Maybe friday i find the time for an other test for you with a new driver, i have some patches found.

The spark files does not help, because not the same system base and only image files (no single files).

Thank you I will try in the evening when you return from work
Greetings to you and thank you again

Danke ich werde am Abend versuchen, wenn Sie von der Arbeit
Grüße an Sie und danken Ihnen wieder

Lafs did not work and I had to wait for a new copy
Greetings to you and sorry to bother you

Sorry für die nicht arbeiten und bis eine neue Version zu warten
Grüße an Sie und entschuldigen uns für Ihre Mühe

Here now a new version attached. Hope this driver works now...
Also attached a full image - hopeful this works if the driver alone not working...

If both not working, sorry... More I can't do currently...

EDIT: Attachment removed...

Sorry for not working too
All of my older versions have been tested and also not working



I think the problem is not just that
But I think the amendment should also be made here






Your time helmets are not in the hurry of it
Thank you for your good follow-up
Greetings to you

Thanks for testing. The driver (and image) itself working with other Ku band transponder as before or fails now complete?

One patch I forgotten - I build a last new version...

And now the last version, again complete as image and driver only...

EDIT: Attachment removed...