[NMP v3.xx] RAMSWAP

Alf
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 46
Registriert: Fr 15. Feb 2013, 20:33
Hat sich bedankt: 4 Mal
Danksagung erhalten: 5 Mal

RAMSWAP

#1

Beitrag von Alf » Do 28. Feb 2019, 22:20

Hallo,

beim Starten der Box, bleibt manchmal die Box, mit der Meldung "RAMSWAP 55MB" stehen, dauer, 3-5 Minuten, bevor sie weiter hochfährt.
Dies trat, erst mit der V3 zu Tage.
Momentan nur ärgerlich, da die Box beim Neustart, halt etwas länger dauert.
Gruß

Alf

Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 10441
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 146 Mal
Danksagung erhalten: 202 Mal
Kontaktdaten:

Re: RAMSWAP

#2

Beitrag von BPanther » Do 28. Feb 2019, 22:29

Da der RamSwap somit wohl normal startet, ist es irgendwas danach. Infrage kommen dann z.B.: NFSD, FritzCall, evremote2, Netzwerk (DHCP vermeiden, feste IP ist schneller) oder auch Emu. Aber das sieht man evtl. auch im seriellen Log, daher das unbedingt machen.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755, Sony Bravia KDL-40W4500 (old)
Boxen mit NMP: 7x UFS910 (128MB), UFS912, 2x UFS913, AV700, AV7000, AV7500 (DVB-S/C/T), Edision Argus Pingulux, Vizyon820HD,
3x AX 4K HD51 (DVB-S/SX/C/T/T2), VU+DUO, VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), VU+Duo4K (DVB-S/SX (FBC)/C (FBC))

Alf
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 46
Registriert: Fr 15. Feb 2013, 20:33
Hat sich bedankt: 4 Mal
Danksagung erhalten: 5 Mal

Re: RAMSWAP

#3

Beitrag von Alf » Do 28. Feb 2019, 23:32

Wenn es nach der RAMSWAP ist, dann hab ich jetzt ein Verdacht, werd es in den nächsten Tagen mal mitloggen.
Gruß

Alf

Alf
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 46
Registriert: Fr 15. Feb 2013, 20:33
Hat sich bedankt: 4 Mal
Danksagung erhalten: 5 Mal

Re: RAMSWAP

#4

Beitrag von Alf » Mo 4. Mär 2019, 20:00

Meine Vermutung war verkehrt. Habe jetzt mal den ser.log mitgeschrieben.
So wie es aussieht, bleibt er beim NFSD ein wenig hängen.

So sieht es aus, wenn die Box nicht durchläuft(langsam).

Code: Alles auswählen

....
showSinglePic /var/boot/bootlogo.mvi
swapoff: /dev/ramzswap0: No such device or address
rmmod: can't unload module 'ramzswap': No such file or directory
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
rpc.nfsd: Setting version failed: errno 22 (Invalid argument)
genau hier bleibt sie für paar Minuten stehen.

Code: Alles auswählen

rpc.nfsd: writing fd to kernel failed: errno 5 (Input/output error)
rpc.nfsd: unable to set any sockets for nfsd
Cannot register service: RPC: Unable to receive; errno = Connection refused
Model: 'cuberevo-mini2'
vBoxType: 12
Input device name: "TDT RC event driver"
Selected Remote: Cuberevo RemoteControl
.....
und hier läuft sie einfach durch:

Code: Alles auswählen

......
showSinglePic /var/boot/bootlogo.mvi
swapoff: /dev/ramzswap0: No such device or address
rmmod: can't unload module 'ramzswap': No such file or directory
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
rpc.nfsd: Setting version failed: errno 22 (Invalid argument)
Model: 'cuberevo-mini2'
vBoxType: 12
Input device name: "TDT RC event driver"
Selected Remote: Cuberevo RemoteControl
......
Und das ganze passiert nicht immer, nur ab und zu.
Gruß

Alf

Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 10441
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 146 Mal
Danksagung erhalten: 202 Mal
Kontaktdaten:

Re: RAMSWAP

#5

Beitrag von BPanther » Mo 4. Mär 2019, 20:08

Hmm, da läuft aber irgendwie was arg schief da bei Dir. Feste IP hast Du aber vergeben, oder? Wäre zumindest vom Netzwerk her besser, da schneller verfügbar. Wenn Du NFSD abschaltest gehts entsprechend normal mit dem starten?
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755, Sony Bravia KDL-40W4500 (old)
Boxen mit NMP: 7x UFS910 (128MB), UFS912, 2x UFS913, AV700, AV7000, AV7500 (DVB-S/C/T), Edision Argus Pingulux, Vizyon820HD,
3x AX 4K HD51 (DVB-S/SX/C/T/T2), VU+DUO, VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), VU+Duo4K (DVB-S/SX (FBC)/C (FBC))

Alf
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 46
Registriert: Fr 15. Feb 2013, 20:33
Hat sich bedankt: 4 Mal
Danksagung erhalten: 5 Mal

Re: RAMSWAP

#6

Beitrag von Alf » Mo 4. Mär 2019, 22:01

Feste IP-Adresse ist vergeben, bei NFSD Aus, scheint das Problem nicht vorhanden zu sein.
Bei NFSD Ein , würde ich sagen, das bei jeden 5 Einschalten die Box hängt.
Gruß

Alf

Benutzeravatar
DboxOldie
Co-Admin
Co-Admin
Beiträge: 5169
Registriert: Sa 6. Aug 2011, 15:21
Hat sich bedankt: 49 Mal
Danksagung erhalten: 167 Mal

Re: RAMSWAP

#7

Beitrag von DboxOldie » Mo 4. Mär 2019, 23:43

Dann schau mal ob portmap gestartet ist, per Telnet:

Code: Alles auswählen

ps | grep portmap
 1386 nobody    1752 S    /sbin/portmap
28656 root      2552 S    grep portmap
Sollte dann so aussehen.... ( natürlich andere Prozessnummern )
MfG DboxOldie

KEIN SUPPORT PER PN > Bitte das Forum benutzen und ins Wiki schauen

Bild

Alf
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 46
Registriert: Fr 15. Feb 2013, 20:33
Hat sich bedankt: 4 Mal
Danksagung erhalten: 5 Mal

Re: RAMSWAP

#8

Beitrag von Alf » Di 5. Mär 2019, 06:14

Wenn die Box hängen bleibt, ist der Dienst nicht gestartet.

Code: Alles auswählen

cuberevo_mini2:~# ps | grep portmap
  910 root      2164 S    grep portmap
läuft die Box durch, ist der Dienst gestartet.

Code: Alles auswählen

cuberevo_mini2:~# ps | grep portmap
  494 nobody    1412 S    /sbin/portmap
  980 root      2164 S    grep portmap
cuberevo_mini2:~# 
Gruß

Alf

Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 10441
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 146 Mal
Danksagung erhalten: 202 Mal
Kontaktdaten:

Re: RAMSWAP

#9

Beitrag von BPanther » Di 5. Mär 2019, 07:15

Bitte mal ein volles ungekürztes serielles Log erstellen und anhängen.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755, Sony Bravia KDL-40W4500 (old)
Boxen mit NMP: 7x UFS910 (128MB), UFS912, 2x UFS913, AV700, AV7000, AV7500 (DVB-S/C/T), Edision Argus Pingulux, Vizyon820HD,
3x AX 4K HD51 (DVB-S/SX/C/T/T2), VU+DUO, VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), VU+Duo4K (DVB-S/SX (FBC)/C (FBC))

Alf
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 46
Registriert: Fr 15. Feb 2013, 20:33
Hat sich bedankt: 4 Mal
Danksagung erhalten: 5 Mal

Re: RAMSWAP

#10

Beitrag von Alf » Di 5. Mär 2019, 17:24

Hier der Log, wenn es nicht richtig läuft.

Code: Alles auswählen

U-Boot 1.3.1-g502c0575 (Aug 29 2010 - 22:47:10) - stm23-2008-03-19
Board: cuberevo-mini II (0x2D42C041)
Board: 14 dotmatrix vfd front
DRAM:  128 MB
Flash: 32 MB
In:    serial
Out:   serial
Err:   serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
no such a key.(ethaddr)
Use default mac address.
booting...
## Booting image at a0060000 ...
   Image Name:   Linux-2.6.32.71_stm24_0217
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    1907317 Bytes =  1.8 MB
   Load Address: 84001000
   Entry Point:  84002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Warning: Unable to determine if kernel is built for 29- or 32-bit mode!

Starting kernel console=ttyAS1,115200 root=/dev/mtdblock3 mem=128m ip=192.168.1.10:192.168.1.9:192.168.1.1:255.255.255.0:cuberevo:eth0:off coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=0 nwhwconf=device:eth0,hwaddr:00:13:18:00:00:4A - 0x00000000 - 0 ...


INIT: version 2.88 booting

mount: /etc/mtab: Read-only file system

INIT: Entering runlevel: 3



cuberevo login: BPanther-Image rev17408-ddt
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
/etc/mdev/mdev-mount.sh: line 90: logger: not found
/etc/mdev/mdev-mount.sh: line 98: logger: not found
[mountall] Mounting local filesystems...
Cleaning /tmp.
Hostname: cuberevo_mini2.
Starting portmap daemon...Segmentation fault
 failed!
Setup Network-Interface eth0
address: 192.168.11.21 netmask 255.255.255.0 broadcast 192.168.11.255 gateway 192.168.11.2
4096+0 records in
4096+0 records out
4194304 bytes (4.0MB) copied, 0.077231 seconds, 51.8MB/s
copLoadFile (file /lib/firmware/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
4096+0 records in
4096+0 records out
4194304 bytes (4.0MB) copied, 0.078018 seconds, 51.3MB/s
copLoadFile (file /lib/firmware/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
rdate: can't connect to remote host (85.236.36.4): Connection refused
Wed Feb 20 05:23:00 CET 2019
showSinglePic /var/boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
swapoff: /dev/ramzswap0: No such device or address
rmmod: can't unload module 'ramzswap': No such file or directory
rpc.nfsd: Setting version failed: errno 22 (Invalid argument)
rpc.nfsd: writing fd to kernel failed: errno 5 (Input/output error)
rpc.nfsd: unable to set any sockets for nfsd
Cannot register service: RPC: Unable to receive; errno = Connection refused
Model: 'cuberevo-mini2'
vBoxType: 12
Input device name: "TDT RC event driver"
Selected Remote: Cuberevo RemoteControl
RemoteControl Map:
              KEY_F1 - 00 -  59
              KEY_F2 - 01 -  60
              KEY_F3 - 02 -  61
                INFO - 03 - 358
               RADIO - 04 - 385
            PREVIOUS - 05 - 412
                 EPG - 06 - 365
              RECORD - 07 - 167
           FAVORITES - 08 - 364
               MEDIA - 09 - 226
             STANDBY - 0A - 116
              KEY_F5 - 0B -  63
                MUTE - 0C - 113
             ARCHIVE - 0D - 361
             0BUTTON - 10 -  11
             1BUTTON - 11 -   2
             2BUTTON - 12 -   3
             3BUTTON - 13 -   4
             4BUTTON - 14 -   5
             5BUTTON - 15 -   6
             6BUTTON - 16 -   7
             7BUTTON - 17 -   8
             8BUTTON - 18 -   9
             9BUTTON - 19 -  10
                  UP - 1A - 103
                DOWN - 1B - 108
               RIGHT - 1C - 106
                LEFT - 1D - 105
              REWIND - 1E - 168
                  OK - 1F - 352
                PLAY - 20 - 207
         FASTFORWARD - 21 - 208
                STOP - 22 - 128
                SLOW - 23 - 409
               AGAIN - 24 - 129
               PAUSE - 25 - 119
                MENU - 26 - 139
                EXIT - 27 - 102
              KEY_F7 - 28 -  65
        KEY_BOOMARKS - 29 - 156
                 RED - 2A - 398
                BLUE - 2B - 401
              KEY_F8 - 2C -  66
               GREEN - 2D - 399
              YELLOW - 2E - 400
               AUDIO - 2F - 392
            SUBTITLE - 30 - 370
                TEXT - 31 - 388
           CHANNELUP - 32 - 402
         CHANNELDOWN - 33 - 403
            VOLUMEUP - 34 - 115
          VOLUMEDOWN - 35 - 114
                 WWW - 36 - 150
Supports Long KeyPress: 1
processComplex >
period 140, delay 10
micom version = 2
Using period=140 delay=10
[SEM] DOWN
/bin/fp_control: SW Version 1.04
Model: cuberevo-mini2
vBoxType: 12
Selected Model: CUBEREVO frontpanel control utility
init
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM =     %H:%M:%S    
, WAKEUPDECREMENT 300
[ca_ci] -> GetInstance
[ca_ci] -> cCA 2
>>> Neutrino (compiled Feb 20 2019 05:22:56) <<<
libstb-hal debug options can be set by exporting HAL_DEBUG.
The following values (or bitwise OR combinations) are valid:
	component: audio   0x01
	component: video   0x02
	component: demux   0x04
	component: play    0x08
	component: power   0x10
	component: init    0x20
	component: ca      0x40
	component: record  0x80
	all components:    0xff
[HAL:00000000:init  ] hal_api_init begin, initialized=0, debug=0x00
[HAL:00000000:init  ] hal_api_init end
[neutrino] frameBuffer Instance created
12288k video mem
CFrameBuffer::setMode avail: 12582912 active: 1
FB: 1280x720x32 line length 5120.
[neutrino] executing /var/tuxbox/config/neutrino.start.
/var/tuxbox/config/neutrino.start failed: No such file or directory
[neutrino] Software update enabled
[neutrino] set debuglevel: 0
[HAL:00000000:init  ] hal_api_init begin, initialized=1, debug=0x00
[HAL:00000000:init  ] hal_api_init end
[english.locale] missing entry: menu.hint_lcd4l_brightness
[english.locale] missing entry: menu.hint_lcd4l_brightness_standby
[neutrino] recording dir: /media/sda1/movie
[neutrino] timeshift dir: /hdd/movie/.timeshift
[HAL:007d42c8:power ] SetCpuFreq(0) => set standby = false
[timerd] wakeup from standby: no
[neutrino.cpp] executing /var/tuxbox/config/deepstandby.off.
[neutrino CEC Settings] setCECSettings init CEC settings...
[deutsch.locale] missing entry: menu.hint_lcd4l_brightness
[deutsch.locale] missing entry: menu.hint_lcd4l_brightness_standby
[neutrino] [CNeutrinoFonts] [SetupNeutrinoFonts - 154] font file: /usr/share/fonts/neutrino.ttf
[neutrino] [CNeutrinoFonts] [SetupNeutrinoFonts - 176] standard font family: Arial Narrow
[neutrino] [CNeutrinoFonts] [SetupDynamicFonts - 136] dynamic font family: Arial Narrow
CVFD::setlcdparameter dimm 7 power 1
CVFD::showServicename: 
CVFD::ShowScrollText: [Tuxbox-Neutrino 3.7.1 wird gestartet ...]
[fe0/0] frontend fd 9 type 1
[frontend.cpp:getFEInfo:344] ioctl(fd, FE_GET_PROPERTY, &cmdseq): Operation not permitted
WARNING: can't query delivery systems on frontend 0/0 - falling back to legacy mode
[femanager.cpp:Init:104] add fe 0
[frontend.cpp:Open:278] /dev/dvb/adapter0/frontend1: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter0/frontend2: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter0/frontend3: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter1/frontend0: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter1/frontend1: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter1/frontend2: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter1/frontend3: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter2/frontend0: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter2/frontend1: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter2/frontend2: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter2/frontend3: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter3/frontend0: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter3/frontend1: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter3/frontend2: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter3/frontend3: No such file or directory
[femanager.cpp:Init:120] found 1 frontends, 4 demuxes

[zapit] Loading services, channel size 248 ..
[getservices.cpp:LoadServices:947] Loading cables...
[getservices.cpp:FindTransponder:601] going to parse dvb-c provider Kabel Deutschland ohne Sky
[zapit] 367 services loaded (367)...
[zapit] service loading took: 90 msec
[getservices.cpp:FindTransponder:601] going to parse dvb-s provider Astra 1KR/1L/1M/1N (19.2E)
[zapit.cpp:PrepareChannels:1072] LoadServices: success
[bouquets.cpp:parseBouquetsXml:417] reading bouquets from /var/tuxbox/config/zapit/bouquets.xml
[bouquets.cpp:parseBouquetsXml:519] total: 28 bouquets
[bouquets.cpp:loadWebchannels:892] Loading webtv from /var/tuxbox/config/webtv_usr.xml ...
[bouquets.cpp:loadWebchannels:892] Loading webradio from /var/tuxbox/config/webradio_usr.xml ...
[bouquets.cpp:parseBouquetsXml:417] reading bouquets from /var/tuxbox/config/zapit/ubouquets.xml
[bouquets.cpp:parseBouquetsXml:519] total: 34 bouquets
############## CBouquetManager::makeRemainingChannelsBouquet: numbers start at: tv 1 radio 1 ############
[zapit] bouquet loading took: 141 msec
CServiceManager::SaveServices: total channels: 378
CServiceManager::SaveServices: processed channels: 367
[zapit.cpp:Start:2542] channels have been loaded succesfully
[zapit.cpp] diseqc type = 0
[femanager.cpp:loadSettings:248] load config for fe0
[femanager.cpp:linkFrontends:425] linking..
[femanager.cpp:linkFrontends:467] Frontend #0: is master, with loop: no, with rotor: no
[frontend.cpp:setDiseqcType:1503] fe0: NO_DISEQC
[femanager.cpp:linkFrontends:493] pip demux: 2
[ca_ci] -> SetInitMask param:3
[ca_ci] -> SetTSClock to: high
[ca_ci] -> Start
[zapit] starting... tid 1037
[zapit] GetConfig...
[neutrino VideoSettings] setupVideoSystem setup videosystem...
[fb]::getFileHandle: WARNING, this should never be used, please report!
>>>>>[src/gui/osd_helpers.cpp - setVideoSystem:213] before SetVideoSystem:
                var.xres        : 1280, var.yres    :  720, var.yres_virtual:  720
                fix.line_length : 5120, fix.smem_len: 12582912 Byte
[HAL:0082aa70:video ] SetVideoSystem: old: '720p50' new: '1080p25'
[HAL:00000000:video ] hdmi_out(0)
[zapit] sdt monitor started
[HAL:00000000:video ] hdmi_out(1)
>>>>>[src/gui/osd_helpers.cpp - setVideoSystem:226] after SetVideoSystem:
                var.xres        : 1920, var.yres    : 1080, var.yres_virtual: 1080
                fix.line_length : 7680, fix.smem_len: 12582912 Byte
[neutrino VideoSettings] setVideoSettings init video settings...
[rcinput:checkdev] /dev/input mtime changed
[rcinput:open] open /dev/input/mouse3 failed: No such device
[rcinput:open] open /dev/input/mouse2 failed: No such device
[rcinput:open] open /dev/input/mouse1 failed: No such device
[rcinput:open] open /dev/input/mouse0 failed: No such device
[rcinput:open] open /dev/input/mice failed: No such device
[rcinput:open] open /dev/input/js3 failed: No such device
[rcinput:open] open /dev/input/js2 failed: No such device
[rcinput:open] open /dev/input/js1 failed: No such device
[rcinput:open] open /dev/input/js0 failed: No such device
[rcinput:open] open /dev/input/event3 failed: No such device
[rcinput:open] open /dev/input/event2 failed: No such device
[rcinput:open] open /dev/input/event1 failed: No such device
[rcinput:open] opened /dev/input/event0 (fd 22) ev 0x100003
[zapit.cpp:leaveStandby:2377] standby 1 recording 0
[zapit.cpp:ZapIt:520] [zapit] zap to zdf_neo HD (59102719f0012b7a tp 12840f002719f001)
[zapit] GetConfig...
[zapit.cpp:StopPlayBack:2300] standby 0 playing 0 forced 0 send_pmt 1
[fe0/0] tune to 474000 DVB-C(Annex A) QAM_256 AUTO H/L srate 6900000 pli 0 plc 0 plm 0 (tuner 474000000 offset 0 timeout 4000)
[fe0/0] ############################## poll timeout, time: 4006 msec (min 2000 max 4006)
[zapit] ZapIt:1 SCR retry tuning 1 after 205ms
[fe0/0] tune to 474000 DVB-C(Annex A) QAM_256 AUTO H/L srate 6900000 pli 0 plc 0 plm 0 (tuner 474000000 offset 0 timeout 4000)
[fe0/0] ############################## poll timeout, time: 4008 msec (min 2000 max 4008)
[neutrino] g_info.has_fan: 1
FAN Speed 10
Cannot open /proc/stb/fan/fan_ctrl: No such file or directory
[yhttpd] Webserver nhttpd/3.4.1 (yhttpd_core/1.3.2) tid 1061
CStreamManager::Listen: on 31339, fd 23
[HAL:008625f0:demux ] Stop #0: not open!
timerd startup, tid 1057
Starting STREAM thread keeper, tid 1062
2019-02-20 05:28:13.153 [sectionsd] start
2019-02-20 05:28:13.172 [sectionsd] Caching: 3 days, 3 hours Extended Text, max 20000 events, Events are old 3 hours after end time
2019-02-20 05:28:13.173 [sectionsd] NTP: disabled, command /usr/sbin/ntpd -n -q -p 0.de.pool.ntp.org
2019-02-20 05:28:13.205 [sectionsd] starting
2019-02-20 05:28:13.206 [sectionsd] SIevent size: 88
2019-02-20 05:28:13.206 [sectionsd] ====> USING SLOW ADDEVENT. export 'NO_SLOW_ADDEVENT=1' to avoid <===
2019-02-20 05:28:13.265 [sectionsd] timeThread::run:: starting, pid 1011 (862983288)
[HAL:008644c0:demux ] _open: setting /dev/dvb/adapter0/demux0 to source 0
2019-02-20 05:28:13.279 [sectionsd] eitThread::run:: starting, pid 1011 (879760504)
2019-02-20 05:28:13.280 [sectionsd] timeThread: get DVB time ch 0x000000000000 (isOpen 1)
2019-02-20 05:28:13.306 [sectionsd] cnThread::run:: starting, pid 1011 (888149112)
2019-02-20 05:28:13.329 [sectionsd] freeSatThread::run:: starting, pid 1011 (896537720)
[yhttpd] Webserver starting...
[neutrino] menue setup
[neutrino] init menus...
[neutrino] mediaplayer menu instance created
[ca_ci] -> GetNumberCISlots
[network config] Instance created
[neutrino] [CNetworkSetup]	[getInstance - 90],  Instance created
[neutrino] ScanSetup Instance created
[HAL:008d20a8:play  ] cPlayback
[mb]->refreshBrowserList
[mb]->refreshFilterList 20
[neutrino CMoviePlayerGui] Instance created...
[neutrino] registering as event client
[neutrino] had to wait 0 ms for timerd start...
[neutrino] Creating channels lists...
[neutrino] got 243 TV and 133 RADIO channels
[neutrino] all channels took: 1 msec
[neutrino] created Kabel Deutschland ohne Sky (3840) bouquet with 243 TV and 122 RADIO channels
[neutrino] sat took: 4 msec
[neutrino] got 11 WebRadio channels
[neutrino] got 8 new TV channels
[neutrino] got 2 removed TV channels
[neutrino] sats took: 8 msec
[neutrino] got 12 TV and 24 RADIO bouquets
[neutrino] took: 13 msec
CNeutrinoApp::SetChannelMode 0 [tv]
[neutrino.cpp:SetChannelMode:2143] newmode 0 sort old -1 new 0
[neutrino.cpp:tvMode:4609] rezap 1 current mode 1
CVFD::showServicename: 
CRemoteControl::tvMode
CNeutrinoApp::SetChannelMode 0 [tv]
[neutrino.cpp:SetChannelMode:2143] newmode 0 sort old -1 new 0
**************************** CChannelList::zapTo_ChannelID 59102719f0012b7a
**************************** CChannelList::zapToChannel me 0x8f47d8 Alle Kanäle tuned 268435455 new zdf_neo HD -> 59102719f0012b7a
2019-02-20 05:28:15.066 [sectionsd] Reading Information from file: /media/sda1/epg/index.xml
2019-02-20 05:28:15.078 [sectionsd] commandserviceStopped
2019-02-20 05:28:15.078 [sectionsd] cnThread: stop eit update filter (not active)
2019-02-20 05:28:15.078 [sectionsd] commandserviceStopped done
stopPlayBack: stopping...
stopPlayBack: stopped
CChannelList::adjustToChannelID me 0x8f47d8 [Alle Kanäle] list size 243 channel_id 59102719f0012b7a
CNeutrinoApp::SetChannelMode 1 [tv]
[neutrino.cpp:SetChannelMode:2143] newmode 1 sort old -1 new 0
[neutrino.cpp:SetChannelMode:2146] sorting, mode 0, 11 bouquets

[zapit.cpp:ZapIt:520] [zapit] zap to zdf_neo HD (59102719f0012b7a tp 12840f002719f001)
[zapit] saving channel, apid 0 sub pid 0 mode 0 volume 50
[zapit] GetConfig...
[zapit.cpp:StopPlayBack:2300] standby 0 playing 0 forced 0 send_pmt 1
[fe0/0] tune to 474000 DVB-C(Annex A) QAM_256 AUTO H/L srate 6900000 pli 0 plc 0 plm 0 (tuner 474000000 offset 0 timeout 4000)
CChannelList::adjustToChannelID me 0x8f47d8 [Alle Kanäle] list size 243 channel_id 59102719f0012b7a
CNeutrinoApp::SetChannelMode 1 [tv]
[neutrino.cpp:SetChannelMode:2143] newmode 1 sort old 0 new 0
2019-02-20 05:28:15.102 [sectionsd] commandserviceChanged: Service change to 59102719f0012b7a demux #0
2019-02-20 05:28:15.102 [sectionsd] changeDMX: for 0x4e not ignored! even though real_pauseCounter> 0 (1)
2019-02-20 05:28:15.105 [sectionsd] changeDMX: for 0x50 not ignored! even though real_pauseCounter> 0 (1)
2019-02-20 05:28:15.106 [sectionsd] changeDMX: for 0x60 not ignored! even though real_pauseCounter> 0 (1)
CHDDDestExec: checking /sys/block/sda
[ca_ci] -> Ready param:1
################################## after all ##################################: 15603 msec
[neutrino] initialized everything
[CPlugins] could not find startup
CVFD::ShowScrollText: [     05:28     ]
[HAL:008644c0:demux ] Read:1 ========== fd has changed, 32->-1 ==========
2019-02-20 05:28:16.286 [sectionsd] timeThread: get DVB time ch 0x2719f0012b7a rc: -1 neutrino_sets_time 0
2019-02-20 05:28:16.286 [sectionsd] timeThread: Time set FAILED (enabled: ntp 0 dvb 1)
2019-02-20 05:28:17.291 [sectionsd] timeThread: get DVB time ch 0x2719f0012b7a (isOpen 1)
CRemoteControl::handleMsg: EVT_TUNE_COMPLETE (0000000000000000)
[fe0/0] ############################## poll timeout, time: 4008 msec (min 2000 max 4008)
[zapit] ZapIt:1 SCR retry tuning 1 after 145ms
2019-02-20 05:28:19.860 [sectionsd] Reading Information finished after 4826 milliseconds (6939 events)
[fe0/0] tune to 474000 DVB-C(Annex A) QAM_256 AUTO H/L srate 6900000 pli 0 plc 0 plm 0 (tuner 474000000 offset 0 timeout 4000)
[dvb-sub] start, stopped 1 pid 0
[HAL:008625f0:demux ] Stop #0: not open!
[dvb-sub] started with pid 0xffffffff
Killed
showSinglePic /var/boot/error.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
[ca_ci] -> GetInstance
[ca_ci] -> cCA 2
>>> Neutrino (compiled Feb 20 2019 05:22:56) <<<
libstb-hal debug options can be set by exporting HAL_DEBUG.
The following values (or bitwise OR combinations) are valid:
	component: audio   0x01
	component: video   0x02
	component: demux   0x04
	component: play    0x08
	component: power   0x10
	component: init    0x20
	component: ca      0x40
	component: record  0x80
	all components:    0xff
[HAL:00000000:init  ] hal_api_init begin, initialized=0, debug=0x00
[HAL:00000000:init  ] hal_api_init end
[neutrino] frameBuffer Instance created
12288k video mem
CFrameBuffer::setMode avail: 12582912 active: 1
FB: 1280x720x32 line length 5120.
[neutrino] executing /var/tuxbox/config/neutrino.start.
/var/tuxbox/config/neutrino.start failed: No such file or directory
[neutrino] Software update enabled
[neutrino] set debuglevel: 0
[HAL:00000000:init  ] hal_api_init begin, initialized=1, debug=0x00
[HAL:00000000:init  ] hal_api_init end
[english.locale] missing entry: menu.hint_lcd4l_brightness
[english.locale] missing entry: menu.hint_lcd4l_brightness_standby
[neutrino] recording dir: /media/sda1/movie
[neutrino] timeshift dir: /hdd/movie/.timeshift
[HAL:007d42c8:power ] SetCpuFreq(0) => set standby = false
[timerd] wakeup from standby: no
[neutrino.cpp] executing /var/tuxbox/config/deepstandby.off.
[neutrino CEC Settings] setCECSettings init CEC settings...
[deutsch.locale] missing entry: menu.hint_lcd4l_brightness
[deutsch.locale] missing entry: menu.hint_lcd4l_brightness_standby
[neutrino] [CNeutrinoFonts] [SetupNeutrinoFonts - 154] font file: /usr/share/fonts/neutrino.ttf
[neutrino] [CNeutrinoFonts] [SetupNeutrinoFonts - 176] standard font family: Arial Narrow
[neutrino] [CNeutrinoFonts] [SetupDynamicFonts - 136] dynamic font family: Arial Narrow
CVFD::setlcdparameter dimm 7 power 1
CVFD::showServicename: 
CVFD::ShowScrollText: [Tuxbox-Neutrino 3.7.1 wird gestartet ...]
[fe0/0] frontend fd 9 type 1
[frontend.cpp:getFEInfo:344] ioctl(fd, FE_GET_PROPERTY, &cmdseq): Operation not permitted
WARNING: can't query delivery systems on frontend 0/0 - falling back to legacy mode
[femanager.cpp:Init:104] add fe 0
[frontend.cpp:Open:278] /dev/dvb/adapter0/frontend1: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter0/frontend2: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter0/frontend3: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter1/frontend0: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter1/frontend1: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter1/frontend2: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter1/frontend3: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter2/frontend0: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter2/frontend1: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter2/frontend2: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter2/frontend3: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter3/frontend0: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter3/frontend1: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter3/frontend2: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter3/frontend3: No such file or directory
[femanager.cpp:Init:120] found 1 frontends, 4 demuxes

[zapit] Loading services, channel size 248 ..
[getservices.cpp:LoadServices:947] Loading cables...
[getservices.cpp:FindTransponder:601] going to parse dvb-c provider Kabel Deutschland ohne Sky
[zapit] 367 services loaded (367)...
[zapit] service loading took: 86 msec
[getservices.cpp:FindTransponder:601] going to parse dvb-s provider Astra 1KR/1L/1M/1N (19.2E)
[zapit.cpp:PrepareChannels:1072] LoadServices: success
[bouquets.cpp:parseBouquetsXml:417] reading bouquets from /var/tuxbox/config/zapit/bouquets.xml
[bouquets.cpp:parseBouquetsXml:519] total: 28 bouquets
[bouquets.cpp:loadWebchannels:892] Loading webtv from /var/tuxbox/config/webtv_usr.xml ...
[bouquets.cpp:loadWebchannels:892] Loading webradio from /var/tuxbox/config/webradio_usr.xml ...
[bouquets.cpp:parseBouquetsXml:417] reading bouquets from /var/tuxbox/config/zapit/ubouquets.xml
[bouquets.cpp:parseBouquetsXml:519] total: 34 bouquets
############## CBouquetManager::makeRemainingChannelsBouquet: numbers start at: tv 1 radio 1 ############
[zapit] bouquet loading took: 135 msec
CServiceManager::SaveServices: total channels: 378
CServiceManager::SaveServices: processed channels: 367
[zapit.cpp:Start:2542] channels have been loaded succesfully
[zapit.cpp] diseqc type = 0
[femanager.cpp:loadSettings:248] load config for fe0
[femanager.cpp:linkFrontends:425] linking..
[femanager.cpp:linkFrontends:467] Frontend #0: is master, with loop: no, with rotor: no
[frontend.cpp:setDiseqcType:1503] fe0: NO_DISEQC
[femanager.cpp:linkFrontends:493] pip demux: 2
[ca_ci] -> SetInitMask param:3
[ca_ci] -> SetTSClock to: high
[ca_ci] -> Start
[zapit] GetConfig...
[neutrino VideoSettings] setupVideoSystem setup videosystem...
[neutrino VideoSettings] setVideoSettings init video settings...
[zapit] starting... tid 1303
[rcinput:checkdev] /dev/input mtime changed
[rcinput:open] open /dev/input/mouse3 failed: No such device
[rcinput:open] open /dev/input/mouse2 failed: No such device
[rcinput:open] open /dev/input/mouse1 failed: No such device
[rcinput:open] open /dev/input/mouse0 failed: No such device
[rcinput:open] open /dev/input/mice failed: No such device
[rcinput:open] open /dev/input/js3 failed: No such device
[rcinput:open] open /dev/input/js2 failed: No such device
[rcinput:open] open /dev/input/js1 failed: No such device
[rcinput:open] open /dev/input/js0 failed: No such device
[rcinput:open] open /dev/input/event3 failed: No such device
[rcinput:open] open /dev/input/event2 failed: No such device
[rcinput:open] open /dev/input/event1 failed: No such device
[rcinput:open] opened /dev/input/event0 (fd 22) ev 0x100003
[zapit] sdt monitor started
[zapit.cpp:leaveStandby:2377] standby 1 recording 0
[zapit.cpp:ZapIt:520] [zapit] zap to zdf_neo HD (59102719f0012b7a tp 12840f002719f001)
[zapit] GetConfig...
[zapit.cpp:StopPlayBack:2300] standby 0 playing 0 forced 0 send_pmt 1
[fe0/0] tune to 474000 DVB-C(Annex A) QAM_256 AUTO H/L srate 6900000 pli 0 plc 0 plm 0 (tuner 474000000 offset 0 timeout 4000)
[frontend.cpp:getEvent:816] [fe0/0] ******** FE_HAS_LOCK: freq 473979786
[fe0/0] tuning took: 521 msec (min 521 max 521)
[HAL:0085cb08:demux ] _open: setting /dev/dvb/adapter0/demux0 to source 0
[zapit] parsing pmt pid 0x68 (zdf_neo HD)
[subtitles] DVBSub: PID=0x021c, lang=deu, cpageid=0001, apageid=0001
[zapit] channel found, audio pid 21e, subtitle pid ffffffff mode 0 volume 50
[capmt.cpp:SetMode:250] PLAY: fe_num 0 dmx_src 0
[capmt.cpp:SetMode:281] channel 59102719f0012b7a [zdf_neo HD] mode 0 START src 0 mask 0 -> 1 update 0
[ca_ci] -> SendCAPMT
TP: 59102719F001
SID: 2B7A
SOURCE: 0
CA_MASK: 1
CALEN: 45
Scrambled: 0
Mode: 0
Enabled: START
[ca_ci] -> FindFreeSlot
No free ci-slot
CaMap Empty
[pmt] set update filter, sid 0x2b7a pid 0x68 version 7
timerd startup, tid 1307
[neutrino] g_info.has_fan: 1
FAN Speed 10
Cannot open /proc/stb/fan/fan_ctrl: No such file or directory
CStreamManager::Listen: on 31339, fd 26
[yhttpd] Webserver nhttpd/3.4.1 (yhttpd_core/1.3.2) tid 1311
[HAL:31e03850:demux ] Stop #0: not open!
2019-02-20 05:28:42.658 [sectionsd] start
2019-02-20 05:28:42.660 [sectionsd] Caching: 3 days, 3 hours Extended Text, max 20000 events, Events are old 3 hours after end time
2019-02-20 05:28:42.660 [sectionsd] NTP: disabled, command /usr/sbin/ntpd -n -q -p 0.de.pool.ntp.org
Starting STREAM thread keeper, tid 1312
2019-02-20 05:28:42.690 [sectionsd] starting
2019-02-20 05:28:42.690 [sectionsd] SIevent size: 88
2019-02-20 05:28:42.691 [sectionsd] ====> USING SLOW ADDEVENT. export 'NO_SLOW_ADDEVENT=1' to avoid <===
2019-02-20 05:28:42.733 [sectionsd] timeThread::run:: starting, pid 1286 (871371896)
2019-02-20 05:28:42.754 [sectionsd] eitThread::run:: starting, pid 1286 (879760504)
2019-02-20 05:28:42.749 [sectionsd] timeThread: get DVB time ch 0x000000000000 (isOpen 1)
2019-02-20 05:28:42.777 [sectionsd] cnThread::run:: starting, pid 1286 (888149112)
2019-02-20 05:28:42.799 [sectionsd] freeSatThread::run:: starting, pid 1286 (896537720)
[yhttpd] Webserver starting...
[neutrino] menue setup
[neutrino] init menus...
[neutrino] mediaplayer menu instance created
[ca_ci] -> GetNumberCISlots
[network config] Instance created
[neutrino] [CNetworkSetup]	[getInstance - 90],  Instance created
[neutrino] ScanSetup Instance created
[HAL:008e8cc0:play  ] cPlayback
[mb]->refreshBrowserList
[mb]->refreshFilterList 20
[neutrino CMoviePlayerGui] Instance created...
[neutrino] registering as event client
[neutrino] had to wait 0 ms for timerd start...
[neutrino] Creating channels lists...
[neutrino] got 243 TV and 133 RADIO channels
[neutrino] all channels took: 1 msec
2019-02-20 05:28:43.717 [sectionsd] Reading Information from file: /media/sda1/epg/index.xml
[neutrino] created Kabel Deutschland ohne Sky (3840) bouquet with 243 TV and 122 RADIO channels
[neutrino] sat took: 7 msec
[neutrino] got 11 WebRadio channels
[neutrino] got 8 new TV channels
[neutrino] got 2 removed TV channels
[neutrino] sats took: 14 msec
[neutrino] got 12 TV and 24 RADIO bouquets
[neutrino] took: 23 msec
CNeutrinoApp::SetChannelMode 0 [tv]
[neutrino.cpp:SetChannelMode:2143] newmode 0 sort old -1 new 0
[neutrino.cpp:tvMode:4609] rezap 1 current mode 1
CVFD::showServicename: 
CRemoteControl::tvMode
CNeutrinoApp::SetChannelMode 0 [tv]
[neutrino.cpp:SetChannelMode:2143] newmode 0 sort old -1 new 0
**************************** CChannelList::zapTo_ChannelID 59102719f0012b7a
**************************** CChannelList::zapToChannel me 0x90d7e8 Alle Kanäle tuned 268435455 new zdf_neo HD -> 59102719f0012b7a
2019-02-20 05:28:43.758 [sectionsd] commandserviceStopped
stopPlayBack: stopping...
stopPlayBack: stopped
CChannelList::adjustToChannelID me 0x90d7e8 [Alle Kanäle] list size 243 channel_id 59102719f0012b7a
CNeutrinoApp::SetChannelMode 1 [tv]
[neutrino.cpp:SetChannelMode:2143] newmode 1 sort old -1 new 0
[neutrino.cpp:SetChannelMode:2146] sorting, mode 0, 11 bouquets

2019-02-20 05:28:43.762 [sectionsd] cnThread: stop eit update filter (not active)
2019-02-20 05:28:43.762 [sectionsd] commandserviceStopped done
CChannelList::adjustToChannelID me 0x90d7e8 [Alle Kanäle] list size 243 channel_id 59102719f0012b7a
CNeutrinoApp::SetChannelMode 1 [tv]
[neutrino.cpp:SetChannelMode:2143] newmode 1 sort old 0 new 0
[zapit.cpp:ZapIt:520] [zapit] zap to zdf_neo HD (59102719f0012b7a tp 12840f002719f001)
[zapit] saving channel, apid 21e sub pid ffffffff mode 0 volume 50
[zapit] GetConfig...
[zapit.cpp:StopPlayBack:2300] standby 0 playing 0 forced 0 send_pmt 1
[capmt.cpp:SetMode:250] PLAY: fe_num 0 dmx_src 0
[capmt.cpp:SetMode:281] channel 59102719f0012b7a [zdf_neo HD] mode 0 STOP src 0 mask 1 -> 0 update 0
[ca_ci] -> SendCAPMT
TP: 59102719F001
SID: 2B7A
SOURCE: 0
CA_MASK: 0
CALEN: 0
Scrambled: 0
Mode: 0
Enabled: STOP
2019-02-20 05:28:43.786 [sectionsd] commandserviceChanged: Service change to 59102719f0012b7a demux #0
CHDDDestExec: checking /sys/block/sda
2019-02-20 05:28:43.790 [sectionsd] changeDMX: for 0x4e not ignored! even though real_pauseCounter> 0 (1)
2019-02-20 05:28:43.790 [sectionsd] changeDMX: for 0x50 not ignored! even though real_pauseCounter> 0 (1)
2019-02-20 05:28:43.791 [sectionsd] changeDMX: for 0x60 not ignored! even though real_pauseCounter> 0 (1)
[ca_ci] -> Ready param:1
################################## after all ##################################: 6564 msec
[neutrino] initialized everything
[CPlugins] could not find startup
CVFD::ShowScrollText: [     05:28     ]
[dvb-sub] paused
[zapit] parsing pmt pid 0x68 (zdf_neo HD)
CRemoteControl::handleMsg: EVT_TUNE_COMPLETE (59102719f0012b7a)
[subtitles] DVBSub: PID=0x021c, lang=deu, cpageid=0001, apageid=0001
[zapit] channel found, audio pid 21e, subtitle pid ffffffff mode 0 volume 50
[zapit.cpp:StartPlayBack:2206] standby 0 playing 0 forced 0
[zapit] vpid 21D apid 21E pcr 21D
[capmt.cpp:SetMode:250] PLAY: fe_num 0 dmx_src 0
[capmt.cpp:SetMode:281] channel 59102719f0012b7a [zdf_neo HD] mode 0 START src 0 mask 0 -> 1 update 0
[ca_ci] -> SendCAPMT
TP: 59102719F001
SID: 2B7A
SOURCE: 0
CA_MASK: 1
CALEN: 45
Scrambled: 0
Mode: 0
Enabled: START
[ca_ci] -> FindFreeSlot
No free ci-slot
CaMap Empty
[pmt] set update filter, sid 0x2b7a pid 0x68 version 7
[HAL:00890a70:demux ] Read:1 ========== fd has changed, 34->-1 ==========
2019-02-20 05:28:45.770 [sectionsd] timeThread: get DVB time ch 0x2719f0012b7a rc: -1 neutrino_sets_time 0
2019-02-20 05:28:45.771 [sectionsd] timeThread: Time set FAILED (enabled: ntp 0 dvb 1)
2019-02-20 05:28:45.798 [sectionsd] commandserviceChanged: Service change to 59102719f0012b7a demux #0
CRemoteControl::handleMsg: EVT_TUNE_COMPLETE (59102719f0012b7a)
2019-02-20 05:28:46.046 [sectionsd] commandserviceChanged: Service change to 59102719f0012b7a demux #0
CVFD::showServicename: zdf_neo HD
[sdt monitor] wakeup...
2019-02-20 05:28:46.788 [sectionsd] timeThread: get DVB time ch 0x2719f0012b7a (isOpen 1)
[SDT] section 0 last 0 tsid 0x2719 onid 0xf001 -> use
2019-02-20 05:28:47.324 [sectionsd] timeThread: get DVB time ch 0x2719f0012b7a rc: 8 neutrino_sets_time 0
[1;31;40m2019-02-20 05:28:47.325 [sectionsd] SIsectionTIME::parse: TDT time: Tue Mar  5 16:57:57 2019[0m
2019-02-20 05:28:47.325 [sectionsd] timeThread: timediff 613537086, current: 20.02.2019 05:28:47, dvb: Tue Mar  5 16:57:57 2019

2019-03-05 16:57:57.000 [sectionsd] cnThread::run:: time set: Tue Mar  5 16:57:57 2019

2019-03-05 16:57:57.001 [sectionsd] freeSatThread::run:: time set: Tue Mar  5 16:57:57 2019

2019-03-05 16:57:57.003 [sectionsd] timeThread: Time set via DVB (TDT), going to sleep for 5 seconds.
2019-03-05 16:57:57.003 [sectionsd] eitThread::run:: time set: Tue Mar  5 16:57:57 2019

[SDT] tid 2719 onid f001
2019-03-05 16:57:57.764 [sectionsd] addEvent: ch 2719f0012b7a running 1 (next) got_CN 0
[neutrino] CSectionsdClient::EVT_GOT_CN_EPG
[sdt monitor] no changes.
2019-03-05 16:57:59.198 [sectionsd] addEvent: ch 2719f0012b7a running 4 (curr) got_CN 2
[neutrino] CSectionsdClient::EVT_GOT_CN_EPG
2019-03-05 16:57:59.794 [sectionsd] cnThread: eit update filter, ch 0x2719f0012b7a, current ver 0x07  got events 3 (not active)
[dvb-sub] start, stopped 1 pid ffffffff
2019-03-05 16:58:00.542 [sectionsd] Reading Information finished after 7158 milliseconds (6939 events)
2019-03-05 16:58:02.009 [sectionsd] timeThread: get DVB time ch 0x2719f0012b7a (isOpen 1)
[ConfigFile] saving /var/tuxbox/config/timerd.conf
2019-03-05 16:58:04.493 [sectionsd] timeThread: get DVB time ch 0x2719f0012b7a rc: 29 neutrino_sets_time 0
[1;31;40m2019-03-05 16:58:04.494 [sectionsd] SIsectionTIME::parse: TOT time: Tue Mar  5 16:58:05 2019[0m
2019-03-05 16:58:04.495 [sectionsd] timeThread: timediff 504534, current: 05.03.2019 16:58:04, dvb: Tue Mar  5 16:58:05 2019

2019-03-05 16:58:04.496 [sectionsd] difference is < 120s, using adjtime(0, 504534). oldd(0, 0)
2019-03-05 16:58:04.497 [sectionsd] timeThread: Time set via DVB (TOT), going to sleep for 1800 seconds.
CVFD::ShowScrollText: [     16:58     ]
[neutrino] CSectionsdClient::EVT_EIT_COMPLETE
CVFD::ShowScrollText: [     16:58     ]
CVFD::ShowScrollText: [     16:58     ]
CVFD::ShowScrollText: [     16:59     ]
CVFD::ShowScrollText: [     16:59     ]
CVFD::ShowScrollText: [     16:59     ]
CVFD::ShowScrollText: [     17:00     ]
CVFD::ShowScrollText: [     17:00     ]
CVFD::ShowScrollText: [     17:00     ]
CVFD::ShowScrollText: [     17:01     ]
CVFD::ShowScrollText: [     17:01     ]
CVFD::ShowScrollText: [     17:01     ]
CVFD::ShowScrollText: [     17:02     ]
CVFD::ShowScrollText: [     17:02     ]
CVFD::ShowScrollText: [     17:02     ]
2019-03-05 17:02:53.065 [sectionsd] Removed 805 old events (6135 left), zap detected 0.
Arena 0:
system bytes     =    2076672
in use bytes     =    1733256
Arena 1:
system bytes     =     331776
in use bytes     =     292544
Arena 2:
system bytes     =    3256320
in use bytes     =    2494264
Total (incl. mmap):
system bytes     =    5746688
in use bytes     =    4601984
max mmap regions =          2
max mmap bytes   =     282624
CVFD::ShowScrollText: [     17:03     ]
CVFD::ShowScrollText: [     17:03     ]
CVFD::ShowScrollText: [     17:03     ]
CVFD::ShowScrollText: [     17:04     ]
CVFD::ShowScrollText: [     17:04     ]
CVFD::ShowScrollText: [     17:04     ]
CVFD::ShowScrollText: [     17:05     ]
CVFD::ShowScrollText: [     17:05     ]
CVFD::ShowScrollText: [     17:05     ]
2019-03-05 17:05:44.945 [sectionsd] cnThread: eit update filter: ### new version 0x08 ###, Activate thread
2019-03-05 17:05:44.947 [sectionsd] cnThread: stop eit update filter (active)
2019-03-05 17:05:45.987 [sectionsd] addEvent: ch 2719f0012b7a running 2 (next) got_CN 0
[neutrino] CSectionsdClient::EVT_GOT_CN_EPG
2019-03-05 17:05:47.023 [sectionsd] addEvent: ch 2719f0012b7a running 1 (next) got_CN 2
2019-03-05 17:05:47.025 [sectionsd] cnThread: eit update filter, ch 0x2719f0012b7a, current ver 0x08  got events 2 (not active)
CVFD::ShowScrollText: [     17:05     ]
CVFD::ShowScrollText: [     17:06     ]
CVFD::ShowScrollText: [     17:06     ]
CVFD::ShowScrollText: [     17:06     ]
2019-03-05 17:06:55.737 [sectionsd] cnThread: eit update filter: ### new version 0x09 ###, Activate thread
2019-03-05 17:06:55.739 [sectionsd] cnThread: stop eit update filter (active)
2019-03-05 17:06:56.138 [sectionsd] addEvent: ch 2719f0012b7a running 1 (next) got_CN 0
[neutrino] CSectionsdClient::EVT_GOT_CN_EPG
CVFD::ShowScrollText: [     17:06     ]
2019-03-05 17:06:57.743 [sectionsd] addEvent: ch 2719f0012b7a running 4 (curr) got_CN 2
[neutrino] CSectionsdClient::EVT_GOT_CN_EPG
2019-03-05 17:06:57.747 [sectionsd] cnThread: eit update filter, ch 0x2719f0012b7a, current ver 0x09  got events 3 (not active)
CVFD::ShowScrollText: [     17:06     ]
CVFD::ShowScrollText: [     17:06     ]
CVFD::ShowScrollText: [     17:07     ]
CVFD::ShowScrollText: [     17:07     ]
CVFD::ShowScrollText: [     17:07     ]
2019-03-05 17:07:53.481 [sectionsd] Removed 18 old events (6117 left), zap detected 0.
Arena 0:
system bytes     =    2076672
in use bytes     =    1731744
Arena 1:
system bytes     =     331776
in use bytes     =     296200
Arena 2:
system bytes     =    3256320
in use bytes     =    2486120
Total (incl. mmap):
system bytes     =    5746688
in use bytes     =    4595984
max mmap regions =          2
max mmap bytes   =     282624
CVFD::ShowScrollText: [     17:08     ]
CVFD::ShowScrollText: [     17:08     ]
CVFD::ShowScrollText: [     17:08     ]
CVFD::ShowScrollText: [     17:09     ]
CVFD::ShowScrollText: [     17:09     ]
CVFD::ShowScrollText: [     17:09     ]
CVFD::ShowScrollText: [     17:10     ]
CVFD::ShowScrollText: [     17:10     ]

Gruß

Alf

Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 10441
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 146 Mal
Danksagung erhalten: 202 Mal
Kontaktdaten:

Re: RAMSWAP

#11

Beitrag von BPanther » Mi 6. Mär 2019, 07:21

Mich wundert der Segfault, der sich ja wohl auch ab und an von selbst behebt... Teste mal bitte die neue rcS, siehe PN...
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755, Sony Bravia KDL-40W4500 (old)
Boxen mit NMP: 7x UFS910 (128MB), UFS912, 2x UFS913, AV700, AV7000, AV7500 (DVB-S/C/T), Edision Argus Pingulux, Vizyon820HD,
3x AX 4K HD51 (DVB-S/SX/C/T/T2), VU+DUO, VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), VU+Duo4K (DVB-S/SX (FBC)/C (FBC))

Alf
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 46
Registriert: Fr 15. Feb 2013, 20:33
Hat sich bedankt: 4 Mal
Danksagung erhalten: 5 Mal

Re: RAMSWAP

#12

Beitrag von Alf » Mi 6. Mär 2019, 20:35

Damit bleibt die Box beim Booten stehen und verlangt nach einem Login.

Code: Alles auswählen

U-Boot 1.3.1-g502c0575 (Aug 29 2010 - 22:47:10) - stm23-2008-03-19
Board: cuberevo-mini II (0x2D42C041)
Board: 14 dotmatrix vfd front
DRAM:  128 MB
Flash: 32 MB
In:    serial
Out:   serial
Err:   serial
Reserve 0x2010000 bytes from 0xa5ff0000 for DGS upgrade buffer.
no such a key.(ethaddr)
Use default mac address.
booting...
## Booting image at a0060000 ...
   Image Name:   Linux-2.6.32.71_stm24_0217
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    1907317 Bytes =  1.8 MB
   Load Address: 84001000
   Entry Point:  84002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Warning: Unable to determine if kernel is built for 29- or 32-bit mode!

Starting kernel console=ttyAS1,115200 root=/dev/mtdblock3 mem=128m ip=192.168.1.10:192.168.1.9:192.168.1.1:255.255.255.0:cuberevo:eth0:off coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=0 nwhwconf=device:eth0,hwaddr:00:13:18:00:00:4A - 0x00000000 - 0 ...


INIT: version 2.88 booting

mount: /etc/mtab: Read-only file system

INIT: Entering runlevel: 3



cuberevo login:
Gruß

Alf

Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 10441
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 146 Mal
Danksagung erhalten: 202 Mal
Kontaktdaten:

Re: RAMSWAP

#13

Beitrag von BPanther » Mi 6. Mär 2019, 20:47

Hmm, dann ist irgendwas mit der Übertragung schief gegangen, die Datei hat den falschen Namen (rcS - Groß-/Kleinschreibung beachten) oder die Rechte sind nicht 755. Bitte genau prüfen. Aber ich baue Dir morgen mal ein volles Image dann zum testen...
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755, Sony Bravia KDL-40W4500 (old)
Boxen mit NMP: 7x UFS910 (128MB), UFS912, 2x UFS913, AV700, AV7000, AV7500 (DVB-S/C/T), Edision Argus Pingulux, Vizyon820HD,
3x AX 4K HD51 (DVB-S/SX/C/T/T2), VU+DUO, VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), VU+Duo4K (DVB-S/SX (FBC)/C (FBC))

Alf
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 46
Registriert: Fr 15. Feb 2013, 20:33
Hat sich bedankt: 4 Mal
Danksagung erhalten: 5 Mal

Re: RAMSWAP

#14

Beitrag von Alf » Mi 6. Mär 2019, 21:32

Der Dateinamen und die Rechte sollten eigentlich passen.
Die Neue rcS ist aber um 500 B kleiner, als die Alte.
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Gruß

Alf

Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 10441
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 146 Mal
Danksagung erhalten: 202 Mal
Kontaktdaten:

Re: RAMSWAP

#15

Beitrag von BPanther » Do 7. Mär 2019, 05:24

Hmm, die Größe ist aber falsch mit 29.148 Bytes, richtig wäre 29.044 Bytes. Wahrscheinlich falsch übertragen (Text/Auto-Mode statt Binär).
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755, Sony Bravia KDL-40W4500 (old)
Boxen mit NMP: 7x UFS910 (128MB), UFS912, 2x UFS913, AV700, AV7000, AV7500 (DVB-S/C/T), Edision Argus Pingulux, Vizyon820HD,
3x AX 4K HD51 (DVB-S/SX/C/T/T2), VU+DUO, VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), VU+Duo4K (DVB-S/SX (FBC)/C (FBC))

Antworten

Zurück zu „Vizyon820HD (Cuberevo Mini2/IpBox910) - USB“