Seite 2 von 2

Re: Fragen nach Installation

Verfasst: Fr 12. Aug 2011, 09:29
von cb1
...oder wird hier mit "bind"-mounts gearbeitet?

Re: Fragen nach Installation

Verfasst: Fr 12. Aug 2011, 09:33
von BPanther
Nö, denn weder df -h noch mount zeigen Dir die "echten" mounts an, nur einen Teil.

Hier mal vom UF910-Flash mit mount:

Code: Alles auswählen

ufs910:~# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
/dev/mtdblock3 on /var type jffs2 (rw,noatime)
/dev/mtdblock3 on /etc type jffs2 (rw,noatime)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /ram type tmpfs (rw)
/dev/root on /dev.static type squashfs (ro)
tmpfs on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw)
tmpfs on /dev/shm type tmpfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)
tmpfs on /ram type tmpfs (rw)
tmpfs on /tmp type tmpfs (rw)
/dev/sda1 on /hdd type ext3 (rw,noatime,nodiratime,data=ordered)
/dev/sdb1 on /swap type ext3 (rw,noatime,nodiratime,data=ordered)
/dev/sdb1 on /var/epg type ext3 (rw,noatime,nodiratime,data=ordered)
/dev/sdb1 on /usr/local/share/neutrino/icons/logo type ext3 (rw,noatime,nodiratime,data=ordered)
/dev/sdb1 on /var/emu type ext3 (rw,noatime,nodiratime,data=ordered)
/dev/sdb1 on /var/keys type ext3 (rw,noatime,nodiratime,data=ordered)
/dev/sdb2 on /tmp/mnt/MINI2 type ext3 (rw,noatime,nodiratime,data=ordered)
/dev/sdb3 on /tmp/mnt/MINI3 type ext3 (rw,noatime,nodiratime,data=ordered)
/dev/sdb4 on /tmp/mnt/MINI4 type ext3 (rw,noatime,nodiratime,data=ordered)
ufs910:~#
Eigentlich müsste es z.B. "richtig" (vollständig) heißen:
/dev/sdb1/swap on /swap type ext3 (rw,noatime,nodiratime,data=ordered)
/dev/sdb1/swap/epg on /var/epg type ext3 (rw,noatime,nodiratime,data=ordered)
/dev/sdb1/swap/logo on /usr/local/share/neutrino/icons/logo type ext3 (rw,noatime,nodiratime,data=ordered)
/dev/sdb1/swap/emu on /var/emu type ext3 (rw,noatime,nodiratime,data=ordered)
/dev/sdb1/swap/keys on /var/keys type ext3 (rw,noatime,nodiratime,data=ordered)

Und ja, es wird --bind benutzt. Damit werden die org. Verzeichnisse lediglich "überlagert", der Inhalt bleibt also erhalten.

Re: Fragen nach Installation

Verfasst: Fr 12. Aug 2011, 09:36
von cb1
OK, jetzt ist's verstanden!

Bei meinen Unix-Servern auf meiner Arbeit hätte das nämlich doch etwas anders ausgesehen ;-)

Re: Fragen nach Installation

Verfasst: Fr 12. Aug 2011, 09:38
von BPanther
Durchaus möglich, wobei Ubuntu nur nen einfaches "none on..." schreibt bei den Systempfaden. Lediglich die HDD wird "normal" geschrieben mit "/dev/sda1 on / type...".

Re: Fragen nach Installation

Verfasst: So 16. Okt 2011, 15:33
von BPanther
Module der rev2853, stm24-p191...

Code: Alles auswählen

av7000:~# lsmod
Module                  Size  Used by    Tainted: P
simu_button              624  0
boxtype                  384  0
bpamem                  1804  4
platform                 792  0 [permanent]
stmalloc                1724  0
sth264pp                4288  0
player2               390584  2 stmalloc,sth264pp
stmdvb                 86696 23 player2
stmsysfs               29272  0
stm_monitor             5900  1 player2
pti                    23436  1 stmdvb
smartcard              17816  0
starci                  3516  3 stmdvb
stv090x                39304  1 stmdvb
pseudocard             12048  2 player2,stmdvb
stmvbi                  5284  0
stmvout               167448  0
stm_v4l2                6632  3 stmdvb,stmvbi,stmvout
p2div64                  912  3 player2,stm_monitor,stv090x
ksound                  9928  1 player2
mpeg2hw                 3360  0
mmelog                  1460  0
stmfb                  37084  2 stmdvb
stmcore_display_stx7109c3   147308  6 player2,stmdvb,pseudocard,stmvbi,stmvout
avs                    23232  1 stmdvb
mme_host               23128  4 player2,stm_monitor,mpeg2hw,mmelog
embxshm                19300  0
embxmailbox             5248  1 embxshm
embxshell              17624  3 mme_host,embxshm,embxmailbox
e2_proc                 8904  2 player2,stmdvb
funcemu                  380  0
nuvoton                 7612  2