BPanther's Neutrino Forum

Wie bei der DM7020HD/DM8000 ist auch hier ein booten von USB oder SD Karte möglich. Allerdings funktioniert dies etwas anders, da das "BIOS" keine Einstellung für SD/USB zulässt.

Die SD/Stick Erstellung kann man auch hier wie bei der DM7020HD/DM8000 mit createMini machen. Es wird bei der DM820 ...

Rebuild the images for dm800se and dm800sev2 with the led fix. Hope it works now correct.

BTW: Moved to new DM 800 SE forum.

echo FFFFFFFF > /proc/stb/fp/led0_pattern
echo 00000000 > /proc/stb/fp/led_pattern_speed

does also net help?

Then I need the output from:

grep -r "" /proc/stb/fp


EDIT: I must now go to work...

You mean that

echo FFFFFFFF > /proc/stb/fp/led0_pattern

still flashing? Strange.

Then try

echo FFFFFFFF > /proc/stb/fp/led0_pattern
echo 00000000 > /proc/stb/fp/led_pattern_speed

Thank you, my dear teacher. Now the image works well, with a simple note. The blue lamp is constantly flashing on the face of the receiver. Is this normal?
Good, finally. ;)
The led should be flashing at booting, if neutrino runs then the led stays blue. Please try the following in telnet:

This ...

Flash and USB images rebuild and uploaded, kernel fits now in original partition size.

This is all IP connection, not the serial (COM Port) connection with the mini USB cable. As I wrote, I need a full serial log with all if you power switch on with the problem NFI or usb image.

I have now uploaded also the "normal image version" to the "Experimentell". But the kernel is the same as ...

Just use this here (first post) from the DM7020HD, you must use createMini -> DM7020HD/DM8000 - booten von USB

But you can use also the NFI (Flash image) for testing, this should (and later must) also work. But I need a serial log to see whats wrong.

Not really, but this shows to me, that you have not used a usb image. The boot sequence is only for flash.

See here for usb booting (from 7020hd, but the same):
//forum.mbremer.de/download/file.php?id=16440&mode=view


But it's ok if you try only the flash image.

For a serial log via COM port ...

Thanks for the pictures. ;)
Hmm, but one important info are missing. There must be under info also exist "boot information" where i can see the flash parameter.

bootinfo.png


I hope you try first the usb image so we have enough space for the kernel.
I have repart the flash a little bit for more ...

I had afraid this problems if I try a "blind build". Which image was testet, usb or flash? I need also a serial log if this really stops at the bootloader or at the kernel loading.
If you have a running OATV E2 in flash, then please also go to: menu -> infomation -> about oatv -> then down to the ...

Hmm, I've tried clean GIT images for the DM800 SE and DM800 SE v2. Flash and USB available at "Experimentell" directory. Use at own risk, I can't test this.

DM800 SE (Experimentell)
DM800 SE v2 (Experimentell)

Sorry, but currently no other dreambox planned.

Ab rev20825 ist das Plugin in den Images der DM7020 und DM8000 enthalten. Zu finden unter Werkzeuge als IMG2USB.

Mit rev20825 wird es eine einfachere Methode per Plugin geben, mit der man direkt an der Box das USB Image auf einem Stick erstellen kann. Es müssen nur noch die beiden Daten *usb_boot* und *usb_root* des USB Images zur Box nach /tmp kopiert werden, den Rest wie partitionieren und formatieren des ...