Streamrelay

Antworten
loka
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 306
Registriert: So 2. Feb 2014, 19:02
Hat sich bedankt: 60 Mal
Danksagung erhalten: 29 Mal

Streamrelay

#1

Beitrag von loka »

Funktioniert das mit BP image und der HD51?
Die CPU müßte doch schnell genug sein
Configuring Stream Relay

Some older receivers support PowerVu only through Stream Relay (internal streaming). This setup needs a fast CPU though and not every STB is fast enough. If you cannot fix stuttering with the following guide, likely your CPU is too slow.

For best performance, the "Include ECM in http streams" setting must be enabled. If your image supports it (openpli, openatv), you can find it in OpenWebif -> Settings -> Customize.

If the setting is not available, you may need to adjust the "ECM fix delay" setting in OSCam webIf (Config -> Stream Relay). Increase/Lower it until there is no stuttering.

Stream Relay needs an modified channel list. Edit your channel list as following:

Go to the OpenWebif and click on the "Stream" button for the channel you want to add.
Download and save the .m3u file.
Open the .m3u file with a text editor and get the stream link. It looks like this: http://stb:8001/1:0:19:0123:3EF:1:C00000:0:0:0:
Replace the port (8001) with the relay port (default: 17999) and the host name ("stb") with 127.0.0.1 http://127.0.0.1:17999/1:0:19:0123:3EF:1:C00000:0:0:0:
Add the new stream link to your channel list (for example with DreamBoxEdit)

IMPORTANT:

Do NOT use the correct Transponder ID/Network ID/Namespace for the stream link.
Use Transponder ID: "11", Network ID: "22" and Namespace: "33".
Set Service Type to "1", and enter the correct Service ID for the channel.

Note:

When using DreamBoxEdit:

A. Go to the list in the middle "Bouquet details".
B. Right click on a channel, select "IPTV and other streaming services", select "Add".
C. Select "DVB/TS".
D. Chosse a name and use the new stream link as URL.
E. Use the "Service ID" of the original channel. You can find it in the left list ("Services")
ufs913 HD51
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13409
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Streamrelay

#2

Beitrag von BPanther »

Das mußt Du selbst probieren, ich nutze das nicht.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
thomas
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 340
Registriert: Mo 13. Feb 2012, 18:35
Hat sich bedankt: 105 Mal
Danksagung erhalten: 33 Mal

Re: Streamrelay

#3

Beitrag von thomas »

das da oben ist veraltet das geht wie bei dreambox direkt
Folgende Benutzer bedankten sich beim Autor thomas für den Beitrag:
loka (Sa 3. Nov 2018, 11:31)
Bewertung: 7.69%
loka
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 306
Registriert: So 2. Feb 2014, 19:02
Hat sich bedankt: 60 Mal
Danksagung erhalten: 29 Mal

Re: Streamrelay

#4

Beitrag von loka »

thomas hat geschrieben: Fr 2. Nov 2018, 16:04 das da oben ist veraltet das geht wie bei dreambox direkt
Ah super, dass die HD51 mit BP das kann
Also dann so:
Configuring DVB-Api (on compatible devices)

Some receivers support PowerVu through direct DVB-Api decryption. If your device supports it, configure OSCam-Emu as follows:

1. Disable Stream Relay (on by default) through the WebIf:

WebIf -> Config -> Stream Relay -> Mode
0 - disabled (use direct DVB-Api decryption)

or by editing the oscam.conf file:

[streamrelay]
stream_relay_enabled = 0

2. Select the correct extended CW API:

Webif -> Config -> DVB-Api -> API for extended CWs
1 - OE 2.2
2 - OE 2.0

or by editing the oscam.conf file:

[dvbapi]
extended_cw_api = 1
Oder sonst noch was?
ufs913 HD51
thomas
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 340
Registriert: Mo 13. Feb 2012, 18:35
Hat sich bedankt: 105 Mal
Danksagung erhalten: 33 Mal

Re: Streamrelay

#5

Beitrag von thomas »

extended_cw_api = 1

streamrelay alles auf 0
Folgende Benutzer bedankten sich beim Autor thomas für den Beitrag:
loka (Sa 3. Nov 2018, 11:31)
Bewertung: 7.69%
loka
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 306
Registriert: So 2. Feb 2014, 19:02
Hat sich bedankt: 60 Mal
Danksagung erhalten: 29 Mal

Re: Streamrelay

#6

Beitrag von loka »

Hört sich gut an. :D
Dann brauch ich nur noch einen schielenden LNB auf 9° Ost
ufs913 HD51
Antworten

Zurück zu „AX 4K HD51 - Allgemeines“