Neutrino Version 4.0.0 HD51 Boot

Antworten
kamaxx
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 59
Registriert: So 26. Mai 2013, 14:59
Hat sich bedankt: 7 Mal
Danksagung erhalten: 6 Mal

Neutrino Version 4.0.0 HD51 Boot

#1

Beitrag von kamaxx »

Guten Nacht;

I have just tried Version 20109 on hd51 but it stucks on "HD51 Stb 4k" and not boot.

Is there any problem like this?
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 12886
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 594 Mal
Danksagung erhalten: 1226 Mal
Kontaktdaten:

Re: Neutrino Version 4.0.0 HD51 Boot

#2

Beitrag von BPanther »

Seens to be you don't use real partitions, this will not work as described at the changelog thread. You must use the "emergency" function to boot partition 1. If you want to use the image, then you must flash the disk.img. All images are lost with the disk.img, so you should make a backup if they needed.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x DM8000
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 1x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
kamaxx
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 59
Registriert: So 26. Mai 2013, 14:59
Hat sich bedankt: 7 Mal
Danksagung erhalten: 6 Mal

Re: Neutrino Version 4.0.0 HD51 Boot

#3

Beitrag von kamaxx »

BPanther hat geschrieben: Di 8. Nov 2022, 21:03 Seens to be you don't use real partitions, this will not work as described at the changelog thread. You must use the "emergency" function to boot partition 1. If you want to use the image, then you must flash the disk.img. All images are lost with the disk.img, so you should make a backup if they needed.
Yes you are right about it.
I can install -m1 (partition1-recovery) but Bpanther Image (-m3) not install
whereas I can install bpanther 3.9.x image on -m2-3-4

On the other hand; I can install NI or any other image on -m3.

I like your images for a long time but Neutrino has some chronicle bugs as general.Thats not belong to one neutrino image.

Thanks a lot for clue :)
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 12886
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 594 Mal
Danksagung erhalten: 1226 Mal
Kontaktdaten:

Re: Neutrino Version 4.0.0 HD51 Boot

#4

Beitrag von BPanther »

All BP images only working with normal partitions, there are no changes between v3 or v4.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x DM8000
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 1x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
kamaxx
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 59
Registriert: So 26. Mai 2013, 14:59
Hat sich bedankt: 7 Mal
Danksagung erhalten: 6 Mal

Re: Neutrino Version 4.0.0 HD51 Boot

#5

Beitrag von kamaxx »

BPanther hat geschrieben: Di 8. Nov 2022, 21:23 All BP images only working with normal partitions, there are no changes between v3 or v4.
What about differences between v3 and v4?
I want to see v4 images much.

For example; I like PY3 images that picture quality is better to PY2.
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 12886
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 594 Mal
Danksagung erhalten: 1226 Mal
Kontaktdaten:

Re: Neutrino Version 4.0.0 HD51 Boot

#6

Beitrag von BPanther »

I hope you don't mean python, because python does not make the picture. And: My neutrino has no python.

The main diff between v3 and v4 is the new box and a lot of internal changes.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x DM8000
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 1x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
kamaxx
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 59
Registriert: So 26. Mai 2013, 14:59
Hat sich bedankt: 7 Mal
Danksagung erhalten: 6 Mal

Re: Neutrino Version 4.0.0 HD51 Boot

#7

Beitrag von kamaxx »

Hallo Moin;

Ja wunder bach :beerdrink:

I tried recovery image and the result is so good, i liked it now


* I have lived channel zapping problem with other neutrino images with same transponder channels before. Now Its fixed with this Bpanther image

* Internet radio is coming when i push audio key. I did not understand but no problem.Cuze Green key is audio key.

* Is there any way to go any channel with left or right button when channel selection list is on? I suppose Neutrino does not allow this action?
I also use dm920 and I changed page up/down keys as channel zapping into keymap.xml.

* I tried some emus and all of them is okay. I wish I could try CCcam but I do not know to change some local files :(
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 12886
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 594 Mal
Danksagung erhalten: 1226 Mal
Kontaktdaten:

Re: Neutrino Version 4.0.0 HD51 Boot

#8

Beitrag von BPanther »

kamaxx hat geschrieben: Mi 9. Nov 2022, 17:36I tried recovery image and the result is so good, i liked it now
Good to hear. :)
kamaxx hat geschrieben: Mi 9. Nov 2022, 17:36* I have lived channel zapping problem with other neutrino images with same transponder channels before. Now Its fixed with this Bpanther image
Hmm, strange, but who knows what the others have changed.
kamaxx hat geschrieben: Mi 9. Nov 2022, 17:36* Internet radio is coming when i push audio key. I did not understand but no problem.Cuze Green key is audio key.
OK, I have never testet the key. But yes, use the green button.
kamaxx hat geschrieben: Mi 9. Nov 2022, 17:36* Is there any way to go any channel with left or right button when channel selection list is on? I suppose Neutrino does not allow this action?
I also use dm920 and I changed page up/down keys as channel zapping into keymap.xml.
I don't understand what you mean. If you at the channel list, you can use r/l for page u/d and P+/- for top or end of the list. Thats what I have configured. All waht you can change at the keys you can see this at Settings->Key setup->Edit keybindings->Channellist. More changes are not possible.
kamaxx hat geschrieben: Mi 9. Nov 2022, 17:36* I tried some emus and all of them is okay. I wish I could try CCcam but I do not know to change some local files :(
As I know there is no real CC for ARM. But, as you can read at the rules, no support for this.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x DM8000
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 1x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Antworten

Zurück zu „AX 4K HD51 - Allgemeines“