Can I get a image of a neutrino?

[atef 0]

Thanks.

OK, leaving better untouched...

Build nearly OK (neutrino binary done), but some files missing. So I'm searching/changing/whatever...

[atef 0]

Thank you
I'm waiting to try the image on my device

[atef 0]

Here it is.

Manually packed as tar.bz2. Using at own risk!


EDIT: Link removed, experimental directory active.

[atef 0]

Don't worry, I use it first on the external memory of the multi-boot

[atef 0]

After the start of playback, the video disappears from the display screen. The initial settings do not appear until the following command is given via Telenet.

Code: Alles auswählen

killall -9 neutrino

This seems to be because

OSD resolution 720x1280

1.png

It must be dimensional
OSD resolution 1920x1080
--------------------------------
When you access this option, the video disappears
And the screen remains black

screenshot.png

Code: Alles auswählen

dm820:~# init 4 && NEUTRINO_DEBUG_LVL=4 neutrino
[ca_ci] -> GetInstance
[ca_ci] -> cCA 0
no choices for input0
no choices for input1
no choices for input2
no choices for input3
[HAL:00000000:init  ] [CEC] new instance created 
>>> Neutrino (compiled May 13 2024 22:34:22) <<<
libstb-hal debug options can be set by exporting HAL_DEBUG.
The following values (or bitwise OR combinations) are valid:
        component: audio   0x01
        component: video   0x02
        component: demux   0x04
        component: play    0x08
        component: power   0x10
        component: init    0x20
        component: ca      0x40
        component: record  0x80
        all components:    0xff
[HAL:00000000:init  ] hal_api_init begin, initialized=0, debug=0x00
[HAL:00000000:init  ] hal_api_init end
[neutrino] mipsbox framebuffer Instance created
[fb_generic] [bcmfb] framebuffer 7200k video mem
[fb_accel_mips] SetMode: 32bits, red 8:0 green 8:8 blue 8:16 transp 8:24
[fb_accel_mips] screen unblanking failed
[fb_accel_mips] 1280x720x32 line length 5120. using bcmfb graphics accelerator.
[neutrino] executing /var/tuxbox/control/neutrino.start
......
[HAL:00000000:init  ] hal_api_init begin, initialized=1, debug=0x00
[HAL:00000000:init  ] hal_api_init end
[english.locale] missing entry: moviebrowser.short_spacer
[ca_ci] -> GetNumberCISlots
[neutrino] recording dir: /hdd/movie
[neutrino] timeshift dir: /hdd/movie/.timeshift
[timerd] wakeup from standby: no
[neutrino] executing /var/tuxbox/control/deepstandby.off
[neutrino] [CNeutrinoFonts] [SetupNeutrinoFonts - 178] font file: /usr/share/fonts/neutrino.ttf
[neutrino] [CNeutrinoFonts] [SetupNeutrinoFonts - 204] standard font family: Arial Narrow
[neutrino] [CNeutrinoFonts] [SetupDynamicFonts - 159] dynamic font family: Arial Narrow
couldn't open LCD - load lcd.ko!
[neutrino] LcdFontRenderClass::LcdFontRenderClass: initializing core...
[neutrino] 
[neutrino] LcdFontRenderClass::AddFont: adding font /usr/share/fonts/neutrino.ttf...
[neutrino] LcdFontRenderClass::AddFont: OK (Arial Narrow/Regular)
[neutrino] LcdFontRenderClass::InitFontCache: Intializing font cache...

[neutrino] CLCD::lcdInit: exit...(no lcd-support)
[neutrino] CLCD::init: LCD-Init failed!
CLCD::setScrollMode scroll_repeats:1
[HAL:00ca6988:play  ] cPlayback
[mb]->refreshBrowserList
[mb]->refreshFilterList 20
[neutrino CMoviePlayerGui] Instance created...

---------------------------------
The tuner is working but there is no signal on the signal bar
But the channels work and the multi-streamt frequencies also work

000.png

0000.png

----------------------------------------------
There is nothing on the front screen of the device, only the icon and the volume bar

-------------
The experiment was conducted on external memory, the multi-bot system >>>Barry Allen
---
These are some screenshots of the system

5.png

6.png

7.png

8.png

[zozman]

Interesting to see, that this "quick shot" works.

OSD 1280x720 is OK, but I can also activate the 1920x1080 option. But this makes the OSD not better and the menu icons smaller. I use at all devices only 1280x720.

HDMI Input requires, as the name says, a HDMI IN signal (may no HDCP). If no cable or signal then black screen.
With EXIT you can leave this.

Don't use init 4, thats not really working and you'll start neutrino twice or more. NEUTRINO_DEBUG_LVL=X does not exist. Just use killall -9 neutrino if neutrino frozen or use the Extras Menu for a clean restart of neutrino - not the Service Menu.

SIG/SNR is only a cosmetic problem, that I can't change yet.

LCD at front is only activated at decimal 132x64. May wrong, I'm searching for the right lcd res - or please write the following outputs, example of vu ultimo4k:

Code: Alles auswählen

vuultimo4k:~# cat /proc/stb/lcd/xres
320
vuultimo4k:~# cat /proc/stb/lcd/yres
1E0
vuultimo4k:~# cat /proc/stb/lcd/bpp
20

Thats HEX values.


EDIT: Attachment removed.

[zozman]

If I see it right, this is a color lcd - real resolution still not found. May a 96x64x16 what I found on a arabic site.

A dream color lcd is not really supported, only a "simple lcd" is activated. Same problems at DM8000 with Grautec LCD (wrong colors with GLCD, LCD4Linux instable/color problems).

And there is a fan. I can activate a fan control (on/off).


EDIT: Experimental directory now active. There is only a tar.xz currently available.
EDIT2: Attachments removed.

[atef 0]

The truth is I used everyone and nothing changed
The problem is that every time it restarts
I must use the command killall -9 neutrino for it to appear
The picture is on the TV and I can watch
Without using the command, the device remains stuck on the black screen

screenshot (1).png

For the front screen
This is the output

Code: Alles auswählen

root@dm820:~$ cat /proc/stb/lcd/xres
00000060
root@dm820:~$ cat /proc/stb/lcd/yres
00000040
root@dm820:~$ cat /proc/stb/lcd/bpp
00000010
root@dm820:~$ 

bwlcd96
use 96x64 16bpp color display

lcdshot_20240514132233.png

https://github.com/openatv/enigma2/blob ... isplay.xml

[atef 0]

A neutrino needs this patch

https://github.com/TangoCash/neutrino-t ... 2dc623d689

[atef 0]

A neutrino needs this patch

https://github.com/TangoCash/neutrino-t ... 2dc623d689

Not really, this is just for PC.

[atef 0]

The osd patch is for arm/mips since ~7 years buildin and I have the option activated for the dm820. But this is not the problem, because the framebuffer (osd) must also work at 1280x720 and should be faster than 1920x1080. If not there is an other problem and has nothing to to with the _optional_ 1920x1080 framebuffer (osd).

BTW: The message at the infobar is by me (since sh4, ~10 years) and only as info there was a crash (same as killall -9 neutrino). Not more. SH4 had some problems after a crash, arm/mips most not.

Thanks for the proc values, lcd 96x64 set for dm820, but only black/white. More I cant change, because I don't have this box. Maybe I can get in a few weeks for testing a device, we will see.
The last build has also more inside what I forgotten.

[atef 0]

dm820_flash_rev20641

She still has the same problems

[atef 0]

Sure, because there was only some small changes (e.g. TuxCom) and all now included to the GIT.

If you have, you can make a full start log with serial cable. Maybe I can see then some problems...

[atef 0]

Are there commands for setting correction for neutrino, such as enigma2?
....
The serial cable requires Microsoft Windows
I haven't used it for a long time, and I don't have a cable
Also, Neutrino is not on the internal memory of the device
.......
The problem lies in the neutrino, which unfortunately needs patches
I don't know how to add enigma2 patches to a neutrino
Build all open source enigma2 images using the same patches
But the neutrino is completely different
https://github.com/atefganm

[BPanther-Mobil]

Only short answer, because i have night shift.

A serial log works every time. Not important if neutrino or e2 startet via usb or flash, because no system need for that. Win also not need, only a terminal for using rs232.

Only patches from the base for kernel and modules can be used. E2 and neutrino are too different, so you can not use any patches for the gui e2 <> neutrino. But i see the sig/snr display not as important, only cosmetic. But you can test satfind via telnet if this shows any values.

The framebuffer with 1920x1080 should be available with the last versions. If not, no real problem.

Strange is, that you have a black picture at start of neutrino. Sure you must kill neutrino to get a picture? Maybe play a movie for a few seconds may also help or a channel change.