Can I get a image of a neutrino?
- atef 0
- Registrierte Benutzer
- Beiträge: 133
- Registriert: Mi 18. Dez 2013, 13:01
- Wohnort: egypt
- Hat sich bedankt: 147 Mal
- Danksagung erhalten: 100 Mal
Can I get a image of a neutrino?
Can I get a image of a neutrino?
My device has a dream 820 HD
I was able to play image Dream 8000 on my 820
But the image does not completely capture the interest
If you can help me get a complete image of my device
--
These are some patches
If possible, add it to the neutrino source
https://github.com/openatv/enigma2/comm ... 4f64f6a6ef
https://github.com/openatv/enigma2/comm ... 6b0f983fe6
My device has a dream 820 HD
I was able to play image Dream 8000 on my 820
But the image does not completely capture the interest
If you can help me get a complete image of my device
--
These are some patches
If possible, add it to the neutrino source
https://github.com/openatv/enigma2/comm ... 4f64f6a6ef
https://github.com/openatv/enigma2/comm ... 6b0f983fe6
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
- Bewertung: 7.14%
Boxs using NMP:
MIPS: DM820
MIPS: DM820
- BPanther
- Administrator
- Beiträge: 13687
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 711 Mal
- Danksagung erhalten: 1758 Mal
- Kontaktdaten:
Re: Can I get a image of a neutrino?
I don't have this box and I do not build blind a image. Also may not possible to build a DM820 image, because the full kernel sources/patches missing - same for DM800.
But your changes seems to be working except SIG/SNR, but they are only cosmetic, channels are found. The tuner configuration is strange with tuner A as Master and B as Independed - why? Is A Master then B Twin or Loop. Or set both to Independed if single signal cables.
But your changes seems to be working except SIG/SNR, but they are only cosmetic, channels are found. The tuner configuration is strange with tuner A as Master and B as Independed - why? Is A Master then B Twin or Loop. Or set both to Independed if single signal cables.
- Bewertung: 14.29%
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM7020, 1x DM8000, 1x DM820, 1x DM7080
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
ARM: 1x DM900 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple)), 1x DM920 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple))
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM7020, 1x DM8000, 1x DM820, 1x DM7080
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
ARM: 1x DM900 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple)), 1x DM920 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple))
- atef 0
- Registrierte Benutzer
- Beiträge: 133
- Registriert: Mi 18. Dez 2013, 13:01
- Wohnort: egypt
- Hat sich bedankt: 147 Mal
- Danksagung erhalten: 100 Mal
Re: Can I get a image of a neutrino?
Firstly, thank you for the responseBPanther hat geschrieben: ↑Fr 10. Mai 2024, 11:49 I don't have this box and I do not build blind a image. Also may not possible to build a DM820 image, because the full kernel sources/patches missing - same for DM800.
But your changes seems to be working except SIG/SNR, but they are only cosmetic, channels are found. The tuner configuration is strange with tuner A as Master and B as Independed - why? Is A Master then B Twin or Loop. Or set both to Independed if single signal cables.
The tuner was changed and a signal was obtained, but it was not complete either
As for the kernel patches
is here
https://github.com/oe-alliance/oe-allia ... eambox-3.4
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
- Bewertung: 7.14%
Boxs using NMP:
MIPS: DM820
MIPS: DM820
- BPanther
- Administrator
- Beiträge: 13687
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 711 Mal
- Danksagung erhalten: 1758 Mal
- Kontaktdaten:
Re: Can I get a image of a neutrino?
Hmm... Seems this box uses a mmcblk* flash device (kernel config) and no NFI, complete different to DM800X. This may take a lot of time to change the GIT for build a "working" image. And I need some more informations (partions, how to flash, usb possible and so on). I have current late shift, so I can't change this the next days/weeks.
EDIT: The link has not the full kernel patches, some are missing. They was only avail at sources.dreamboxupdate.com, but the "new" server (dreamboxupdate.com/sources) is incomplete and has no kernel patches.
I must now go to work...
EDIT: The link has not the full kernel patches, some are missing. They was only avail at sources.dreamboxupdate.com, but the "new" server (dreamboxupdate.com/sources) is incomplete and has no kernel patches.
I must now go to work...
- Bewertung: 14.29%
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM7020, 1x DM8000, 1x DM820, 1x DM7080
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
ARM: 1x DM900 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple)), 1x DM920 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple))
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM7020, 1x DM8000, 1x DM820, 1x DM7080
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
ARM: 1x DM900 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple)), 1x DM920 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple))
- atef 0
- Registrierte Benutzer
- Beiträge: 133
- Registriert: Mi 18. Dez 2013, 13:01
- Wohnort: egypt
- Hat sich bedankt: 147 Mal
- Danksagung erhalten: 100 Mal
Re: Can I get a image of a neutrino?
Thank youBPanther hat geschrieben: ↑Fr 10. Mai 2024, 13:38 Hmm... Seems this box uses a mmcblk* flash device (kernel config) and no NFI, complete different to DM800X. This may take a lot of time to change the GIT for build a "working" image. And I need some more informations (partions, how to flash, usb possible and so on). I have current late shift, so I can't change this the next days/weeks.
EDIT: The link has not the full kernel patches, some are missing. They was only avail at sources.dreamboxupdate.com, but the "new" server (dreamboxupdate.com/sources) is incomplete and has no kernel patches.
I must now go to work...
take your time
You will find the necessary patches here
https://github.com/oe-alliance/oe-allia ... meta-dream
- Bewertung: 14.29%
Boxs using NMP:
MIPS: DM820
MIPS: DM820
- BPanther
- Administrator
- Beiträge: 13687
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 711 Mal
- Danksagung erhalten: 1758 Mal
- Kontaktdaten:
Re: Can I get a image of a neutrino?
I have build a kernel for testing, see attachment. But the dm820 ist strange, because the kernel is only valid at the rootfs.tar.bz2 in /boot and twice as gz and bin?! The kernel.bin (flash image from OATV) is empty ?!
I don't understand this box...
EDIT: Attachment removed.
I don't understand this box...
EDIT: Attachment removed.
- Bewertung: 14.29%
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM7020, 1x DM8000, 1x DM820, 1x DM7080
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
ARM: 1x DM900 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple)), 1x DM920 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple))
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM7020, 1x DM8000, 1x DM820, 1x DM7080
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
ARM: 1x DM900 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple)), 1x DM920 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple))
- atef 0
- Registrierte Benutzer
- Beiträge: 133
- Registriert: Mi 18. Dez 2013, 13:01
- Wohnort: egypt
- Hat sich bedankt: 147 Mal
- Danksagung erhalten: 100 Mal
Re: Can I get a image of a neutrino?
I build on this oe-alliance-core naturallyBPanther hat geschrieben: ↑Sa 11. Mai 2024, 22:09 I have build a kernel for testing, see attachment. But the dm820 ist strange, because the kernel is only valid at the rootfs.tar.bz2 in /boot and twice as gz and bin?! The kernel.bin (flash image from OATV) is empty ?!
I don't understand this box...
dm820-kernel.tar.gz
Unfortunately, I do not have enough experience to guide you in correcting the matter
But I'm just an amateur
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
- Bewertung: 7.14%
Boxs using NMP:
MIPS: DM820
MIPS: DM820
- BPanther
- Administrator
- Beiträge: 13687
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 711 Mal
- Danksagung erhalten: 1758 Mal
- Kontaktdaten:
Re: Can I get a image of a neutrino?
I have seen the original image at http://dreamboxupdate.com/opendreambox/ ... /index.php and they don't have a vmlinuz.gz*, only the uncompressed kernel vmlinuz.bin* found at /boot. And the flash file is a tar.xz. Means, the attached kernel should be working. Please check if modules loading.
But I think the file vmlinux.gz-rescue-3.4-r1-dm820-20200715.bin is the normal vmlinuz.gz, only renamed. But for what is this file? Is the name variable e.g. as vmlinux.gz-rescue-3.4-dm820-20240512.bin ? Hmm...
And what does
parted /dev/mmcblk0 print
shown?
EDIT: Attachment removed.
But I think the file vmlinux.gz-rescue-3.4-r1-dm820-20200715.bin is the normal vmlinuz.gz, only renamed. But for what is this file? Is the name variable e.g. as vmlinux.gz-rescue-3.4-dm820-20240512.bin ? Hmm...
And what does
parted /dev/mmcblk0 print
shown?
EDIT: Attachment removed.
- Bewertung: 14.29%
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM7020, 1x DM8000, 1x DM820, 1x DM7080
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
ARM: 1x DM900 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple)), 1x DM920 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple))
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM7020, 1x DM8000, 1x DM820, 1x DM7080
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
ARM: 1x DM900 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple)), 1x DM920 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple))
- atef 0
- Registrierte Benutzer
- Beiträge: 133
- Registriert: Mi 18. Dez 2013, 13:01
- Wohnort: egypt
- Hat sich bedankt: 147 Mal
- Danksagung erhalten: 100 Mal
Re: Can I get a image of a neutrino?
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Zuletzt geändert von atef 0 am Mo 13. Mai 2024, 09:31, insgesamt 1-mal geändert.
- Bewertung: 7.14%
Boxs using NMP:
MIPS: DM820
MIPS: DM820
- atef 0
- Registrierte Benutzer
- Beiträge: 133
- Registriert: Mi 18. Dez 2013, 13:01
- Wohnort: egypt
- Hat sich bedankt: 147 Mal
- Danksagung erhalten: 100 Mal
- atef 0
- Registrierte Benutzer
- Beiträge: 133
- Registriert: Mi 18. Dez 2013, 13:01
- Wohnort: egypt
- Hat sich bedankt: 147 Mal
- Danksagung erhalten: 100 Mal
Re: Can I get a image of a neutrino?
This is a complete bootloader that has nothing to do with the image bootBPanther hat geschrieben: ↑So 12. Mai 2024, 22:42 I have seen the original image at http://dreamboxupdate.com/opendreambox/ ... /index.php and they don't have a vmlinuz.gz*, only the uncompressed kernel vmlinuz.bin* found at /boot. And the flash file is a tar.xz. Means, the attached kernel should be working. Please check if modules loading.
It is downloaded to the device individually and sent to tmp
Then use the following commands
Code: Alles auswählen
flash-rescue /tmp/*.bin
- Bewertung: 14.29%
Boxs using NMP:
MIPS: DM820
MIPS: DM820
- BPanther
- Administrator
- Beiträge: 13687
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 711 Mal
- Danksagung erhalten: 1758 Mal
- Kontaktdaten:
Re: Can I get a image of a neutrino?
I must go to work...
You have forgot the "print" at the end of the line.
parted /dev/mmcblk0 print
Then should all partions listet. Example hd51:
And, does the kernel working?
You have forgot the "print" at the end of the line.
parted /dev/mmcblk0 print
Then should all partions listet. Example hd51:
Code: Alles auswählen
hd51:~# parted /dev/mmcblk0 print
Model: MMC 4MEYMA (sd/mmc)
Disk /dev/mmcblk0: 3930MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 2097kB 1049kB boot msftdata
2 2097kB 10.5MB 8389kB kernel1
3 10.5MB 978MB 968MB ext4 rootfs1
4 978MB 987MB 8389kB kernel2
5 987MB 1955MB 968MB ext4 rootfs2
6 1955MB 1963MB 8389kB kernel3
7 1963MB 2931MB 968MB ext4 rootfs3
8 2931MB 2939MB 8389kB kernel4
9 2939MB 3908MB 969MB ext4 rootfs4
- Bewertung: 7.14%
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM7020, 1x DM8000, 1x DM820, 1x DM7080
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
ARM: 1x DM900 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple)), 1x DM920 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple))
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM7020, 1x DM8000, 1x DM820, 1x DM7080
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
ARM: 1x DM900 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple)), 1x DM920 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple))
- atef 0
- Registrierte Benutzer
- Beiträge: 133
- Registriert: Mi 18. Dez 2013, 13:01
- Wohnort: egypt
- Hat sich bedankt: 147 Mal
- Danksagung erhalten: 100 Mal
Re: Can I get a image of a neutrino?
I apologize
Prefer the output
EDIT by BPanther: Full quote removed.
Prefer the output
Code: Alles auswählen
root@dm820:~$ parted /dev/mmcblk0 print
Model: MMC SEM04G (sd/mmc)
Disk /dev/mmcblk0: 3959MB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 75,5MB 1074MB 998MB ext4 rootfs
2 1074MB 3959MB 2886MB ext4 data
root@dm820:~$
EDIT by BPanther: Full quote removed.
- Bewertung: 7.14%
Boxs using NMP:
MIPS: DM820
MIPS: DM820
- BPanther
- Administrator
- Beiträge: 13687
- Registriert: Do 11. Jan 2007, 00:06
- Wohnort: Berlin
- Hat sich bedankt: 711 Mal
- Danksagung erhalten: 1758 Mal
- Kontaktdaten:
Re: Can I get a image of a neutrino?
Hmm, strange box. Where is the kernel stored? And what is in partition 2 ("data")? The box has 4 GB Flash, but only 1 GB used for root. No extra space for kernel. Or is the kernel at a "old flash type" how /dev/mtdX?
What is the output of
cat /proc/mtd
The hd51 has nothing.
Or maybe same as a "real" linux, kernel and root in 1 partition.
I can try to make some changes for building, but I can't test anything and a online update will also not possible because I don't know how yet.
What is the output of
cat /proc/mtd
The hd51 has nothing.
Code: Alles auswählen
hd51:~# cat /proc/mtd
dev: size erasesize name
hd51:~#
I can try to make some changes for building, but I can't test anything and a online update will also not possible because I don't know how yet.
- Bewertung: 14.29%
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM7020, 1x DM8000, 1x DM820, 1x DM7080
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
ARM: 1x DM900 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple)), 1x DM920 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple))
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM7020, 1x DM8000, 1x DM820, 1x DM7080
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
ARM: 1x DM900 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple)), 1x DM920 (DVB-S/SX (FBC)/S/C/T/T2 (Tripple))
- atef 0
- Registrierte Benutzer
- Beiträge: 133
- Registriert: Mi 18. Dez 2013, 13:01
- Wohnort: egypt
- Hat sich bedankt: 147 Mal
- Danksagung erhalten: 100 Mal
Re: Can I get a image of a neutrino?
cat /proc/mtd
Code: Alles auswählen
root@dm820:~$ cat /proc/mtd
dev: size erasesize name
mtd0: 01000000 00010000 "entire_device"
mtd1: 00100000 00010000 "bootloader"
mtd2: 00f00000 00010000 "recovery"
root@dm820:~$
- Bewertung: 7.14%
Boxs using NMP:
MIPS: DM820
MIPS: DM820