Is it possible to make an image of a neutrino...?

[DM900]

If you are using C band
The high and low frequency should be set like this
For satellites that operate on the C band
To get a signal

screenshot.png

I know that how to set c band sir
Above I set Ku band but still no signal in 52.5E
Even log shows signal

[atef 0]

Of course, the problem does not relate to a specific satellite
But you have another problem, I don't know where it is
All satellites work for me, but without a disk switch

screenshot (1).png

screenshot (2).png

[DM900]

Of course, the problem does not relate to a specific satellite
But you have another problem, I don't know where it is
All satellites work for me, but without a disk switch

screenshot (1).png

screenshot (2).png

Yes u are right
this neutrino images not support diseqc switch very well that is exactly a problem
And are u getting all tps of 52.5 or other satellite because without diseqc switch I don't get various tps of satellite

[atef 0]

I don't understand what tps is
Can you explain more?

[atef 0]

I think he mean tps = transponders.

[atef 0]

Neutrino has no problem with diseqc switch
It used to work for me in the past on my SH4 without a problem
I had a satellite dish number on me
Three of the lnb-lnb c band are for circular polarization
and lnb c band for linear polarization
And lnb for ku band
Everything was working without problems

[atef 0]

Of course, the problem does not relate to a specific satellite
But you have another problem, I don't know where it is
All satellites work for me, but without a disk switch

screenshot (1).png

screenshot (2).png

Yes u are right
this neutrino images not support diseqc switch very well that is exactly a problem
And are u getting all tps of 52.5 or other satellite because without diseqc switch I don't get various tps of satellite

All frequencies work for me in accordance with my geographical location and coverage maps

screenshot (4).png

screenshot (5).png

[DM900]

I think he mean tps = transponders.

Yes transponders I connect 52.5 without diseqc switch and it scans some transponders but not all I try then other Ku band satellite too and same result only scan some transponders
I have full coverage and all transponders are ok in Enigma2

[DM900]

Neutrino has no problem with diseqc switch
It used to work for me in the past on my SH4 without a problem
I had a satellite dish number on me
Three of the lnb-lnb c band are for circular polarization
and lnb c band for linear polarization
And lnb for ku band
Everything was working without problems

Sh4 and dm900 is different in various aspects working there does not mean it will work in dm900 too

[atef 0]

I think he mean tps = transponders.

Yes transponders I connect 52.5 without diseqc switch and it scans some transponders but not all I try then other Ku band satellite too and same result only scan some transponders
I have full coverage and all transponders are ok in Enigma2

screenshot (5).png

[atef 0]

@DM900: I hope you have activated the NIT scan. This will find tps which are not listet or with wrong data in satellites.xml.

BTW: DiseqC has for all architectures the same source. The only thing maybe timing problems (diseqc commands) because the old sh4/mips have slow cpu power and so on, newer may "too fast".

[DM900]

@DM900: I hope you have activated the NIT scan. This will find tps which are not listet or with wrong data in satellites.xml.

BTW: DiseqC has for all architectures the same source. The only thing maybe timing problems (diseqc commands) because the old sh4/mips have slow cpu power and so on, newer may "too fast".

Thanks for effort I don't know what is the problem here than I have full Signal of all satellite and everything is ok in Enigma2

[atef 0]

@DM900: I hope you have activated the NIT scan. This will find tps which are not listet or with wrong data in satellites.xml.

BTW: DiseqC has for all architectures the same source. The only thing maybe timing problems (diseqc commands) because the old sh4/mips have slow cpu power and so on, newer may "too fast".

Can this code be added to Neutrino?


https://github.com/openatv/enigma2/comm ... ae80d099e0

or

https://github.com/openatv/enigma2/comm ... fcc8a5f6c2

[atef 0]

Can this code be added to Neutrino?
https://github.com/openatv/enigma2/comm ... ae80d099e0
or
https://github.com/openatv/enigma2/comm ... fcc8a5f6c2

This won't work. E2 works only with max values in percent, Neutrino works with max values of 65535 (eqal to 100%). And if I recalculate this so I have here a SNR of 95% - this is not right, 65-75% is here right. So I can leave this with the simple multiplicators of 350/35. Neither E2 nor Neutrino can display the real values, these are only "estimation values", which also depend on the driver. This always requires a real measuring device. Therefore not really important.

[DM900]

@DM900: I hope you have activated the NIT scan. This will find tps which are not listet or with wrong data in satellites.xml.

BTW: DiseqC has for all architectures the same source. The only thing maybe timing problems (diseqc commands) because the old sh4/mips have slow cpu power and so on, newer may "too fast".

Can this code be added to Neutrino?


https://github.com/openatv/enigma2/comm ... ae80d099e0

or

https://github.com/openatv/enigma2/comm ... fcc8a5f6c2

@atef0 u have dm900 if yes then please tell me which tuner 2166D or 2166B