Is it possible to make an image of a neutrino...?

[zozman]

I use here only Uni/Jess and this works - if I use both tuner inputs. Only one connection does also not work here.

And if you switch the cables and configs of A1<->A2?

[DM900]

I use here only Uni/Jess and this works - if I use both tuner inputs. Only one connection does also not work here.

And if you switch the cables and configs of A1<->A2?

I configure both A1 and A2 but no signal in diseqc 1.1
But both tuners working in Enigma2 on same settings
I think something is wrong in diseqc 1.1 in this image

[DM900]

Have you tried instead Diseqc 1.1 the option Advanced? May this works better. I can't test this, I have Unicable/Jess.

[DM900]

Have you tried instead Diseqc 1.1 the option Advanced? May this works better. I can't test this, I have Unicable/Jess.

Yes I tested advance also same result no signal or scan fail. All settings are correctly set and working in Enigma2 images only problem this image

[DM900]

You should make a log. Maybe an other can help what's the problem is.

Telnet:

sc

Then try to switch to the problem channel.

sr

To deactivate the log. Copy the output in to a text file and attach here.

[DM900]

You should make a log. Maybe an other can help what's the problem is.

Telnet:

sc

Then try to switch to the problem channel.

sr

To deactivate the log. Copy the output in to a text file and attach here.

Channels are not scanning because of no signal showing in tuner A1 (diseqc 1.1)
I will put log here

text.txt

[zozman]

Hmm, the tuner has a signal found:

Code: Alles auswählen

[fe0/0] FE_HAS_SIGNAL

But what is this for a satellite?

Code: Alles auswählen

[fe0/0] tune to 4050000 DVB-S2 8PSK 3/4 V/R srate 7200000
[fe0/0] tune to 4060000 DVB-S2 8PSK 3/5 V/R srate 7200000

And why is there a diff of 10000 of the transponder between the scan and 3/4 <> 3/5? This is not a normal transponder scan. You should use the correct transponder data.

[DM900]

Hmm, the tuner has a signal found:

Code: Alles auswählen

[fe0/0] FE_HAS_SIGNAL

But what is this for a satellite?

Code: Alles auswählen

[fe0/0] tune to 4050000 DVB-S2 8PSK 3/4 V/R srate 7200000
[fe0/0] tune to 4060000 DVB-S2 8PSK 3/5 V/R srate 7200000

And why is there a diff of 10000 of the transponder between the scan and 3/4 <> 3/5? This is not a normal transponder scan. You should use the correct transponder data.

It is c band correct transponder data even I manually check tp but no signal I will upload new log file with Ku band transponder data shortly
And all these are ok in Enigma2 with diseqc 1.1

[zozman]

C Band never testet (no LNB for this), but which sat is this?

[DM900]

C Band never testet (no LNB for this), but which sat is this?

It is 83E
But I am facing same problem in Ku band too
Satellite 52.5e yahsat

[zozman]

83E is not in a list at lyngsat, 52.5E can be found. I think you should use still E2, I can't test or fix this problem.

[DM900]

83E is not in a list at lyngsat, 52.5E can be found. I think you should use still E2, I can't test or fix this problem.

83e is present in both lyngsat and flysat
Ok thanks no problem
But I will upload log of Ku band shortly please check that once

[DM900]

83e is present in both lyngsat and flysat

Sorry, you have right, found under "asia".

[DM900]

83e is present in both lyngsat and flysat

Sorry, you have right, found under "asia".

Please check this log it is Ku band 52.0E

log.txt

screenshot.png

screenshot (1).png

screenshot (2).png

screenshot (3).png

screenshot (4).png

[atef 0]

If you are using C band
The high and low frequency should be set like this
For satellites that operate on the C band
To get a signal

screenshot.png