A request from the esteemed developers regarding Dreambox 800se

[ali ganm]

Good morning

Dear developers, please build my image for Dreambox 800se

[atef 0]

Sorry, but currently no other dreambox planned.

[atef 0]

Hmm, I've tried clean GIT images for the DM800 SE and DM800 SE v2. Flash and USB available at "Experimentell" directory. Use at own risk, I can't test this.

DM800 SE (Experimentell)
DM800 SE v2 (Experimentell)

[ali ganm]

Thanks to the dear developers, the image was tested but it did not boot and stopped on the bootloader

[atef 0]

I had afraid this problems if I try a "blind build". Which image was testet, usb or flash? I need also a serial log if this really stops at the bootloader or at the kernel loading.
If you have a running OATV E2 in flash, then please also go to: menu -> infomation -> about oatv -> then down to the "boot informations". I need the complete info.

BTW: "Thanks" for a post is the "hand" symbol, not the "!" symbol.

[ali ganm]

Thank you very much

[ali ganm]

Thank you very much

[BPanther]

Thanks for the pictures.
Hmm, but one important info are missing. There must be under info also exist "boot information" where i can see the flash parameter.

bootinfo.png

I hope you try first the usb image so we have enough space for the kernel.
I have repart the flash a little bit for more space for the kernel, now 5 MB, because 4 MB are not enough.

And please, I need also a full serial log so that I can see when the box exactly stops.

[ali ganm]

Does this help you?

[BPanther]

Not really, but this shows to me, that you have not used a usb image. The boot sequence is only for flash.

See here for usb booting (from 7020hd, but the same):



But it's ok if you try only the flash image.

For a serial log via COM port (no IP address) just boot the box withou pressing any key. Then we have a full log with all messages.

dreambox-hinten_web.jpg

[ali ganm]

know how to boot from the BIOS, but how do I burn the two files in the attached image to USB?

[BPanther]

Just use this here (first post) from the DM7020HD, you must use createMini -> DM7020HD/DM8000 - booten von USB

But you can use also the NFI (Flash image) for testing, this should (and later must) also work. But I need a serial log to see whats wrong.

[ali ganm]

/proc/stb/ir/mouse/up_down_swap_choices:off on
/proc/stb/ir/mouse/up_down_swap:off
/proc/stb/ir/mouse/left_right_swap_choices:off on
/proc/stb/ir/mouse/left_right_swap:off
/proc/stb/ir/rc/key_swap_choices:off on
/proc/stb/ir/rc/key_swap:off
/proc/stb/ir/rc/mask2:0000000f
/proc/stb/ir/rc/mask1:00000f00
/proc/stb/ir/rc/mask0:0000000f
/proc/stb/audio/pcr_offset_ac3plus:00002328
/proc/stb/audio/pcr_offset_aache:00000000
/proc/stb/audio/pcr_offset_aac:00000000
/proc/stb/audio/pcr_offset_ac3:00000000
/proc/stb/audio/pcr_offset_mpeg:00000000
/proc/stb/audio/audio_delay_bitstream:00000000
/proc/stb/audio/audio_delay_pcm:00000000
/proc/stb/audio/pts_offset:00000000
/proc/stb/audio/force_hdmi_audio_disable:00000000
/proc/stb/audio/aac_choices:downmix passthrough
/proc/stb/audio/aac:downmix
/proc/stb/audio/ac3plus_choices:force_ac3 use_hdmi_caps
/proc/stb/audio/ac3plus:use_hdmi_caps
/proc/stb/audio/ac3_choices:downmix passthrough
/proc/stb/audio/ac3:downmix
/proc/stb/vmpeg/0/progressive_override_choices:disable top_bottom bottom_top
/proc/stb/vmpeg/0/progressive_override:top_bottom
/proc/stb/vmpeg/0/fallback_framerate_choices:unknown 23976 24000 25000 29970 30000 50000 59940 60000
/proc/stb/vmpeg/0/fallback_framerate:60000
/proc/stb/vmpeg/0/sar_y:0
/proc/stb/vmpeg/0/sar_x:0
/proc/stb/vmpeg/0/pcr_offset_mpeg2:00000000
/proc/stb/vmpeg/0/pcr_offset_mpeg1:00000000
/proc/stb/vmpeg/0/pcr_offset_h264:00004650
/proc/stb/vmpeg/0/progressive:1
/proc/stb/vmpeg/0/aspect:3
/proc/stb/vmpeg/0/pts_offset:00000000
/proc/stb/vmpeg/0/dst_height:00000240
/proc/stb/vmpeg/0/dst_width:000002d0
/proc/stb/vmpeg/0/dst_top:00000000
/proc/stb/vmpeg/0/dst_left:00000000
/proc/stb/vmpeg/0/dst_apply:00000000
/proc/stb/vmpeg/0/pep_apply:00000001
/proc/stb/vmpeg/0/linear_scale_percent:0000002c
/proc/stb/vmpeg/0/pep_scaler_sharpness:0000000d
/proc/stb/vmpeg/0/pep_brightness:00008000
/proc/stb/vmpeg/0/pep_hue:00008000
/proc/stb/vmpeg/0/pep_saturation:00008000
/proc/stb/vmpeg/0/pep_contrast:00008000
/proc/stb/vmpeg/0/pep_digital_contour_removal:00000000
/proc/stb/vmpeg/0/pep_mosquito_noise_reduction:00000000
/proc/stb/vmpeg/0/pep_block_noise_reduction:00000000
/proc/stb/vmpeg/0/codec:MPEG2
/proc/stb/vmpeg/0/yres:2d0
/proc/stb/vmpeg/0/xres:500
/proc/stb/vmpeg/0/pts:00000000-00000000=00000000
/proc/stb/vmpeg/deinterlace_choices:off on auto bob
/proc/stb/vmpeg/deinterlace:auto
/proc/stb/denc/0/wss_choices:off auto auto(4:3_off) 4:3_full_format 14:9_letterbox_center 14:9_letterbox_top 16:9_letterbox_center 16:9_letterbox_top >16:9_letterbox_center 14:9_full_format 16:9_full_format
/proc/stb/denc/0/wss:auto
/proc/stb/fb/primary/zoffset:00000000
/proc/stb/fb/primary/3d_choices:off sbs tab
/proc/stb/fb/primary/3d:off
/proc/stb/video/alpha:255
/proc/stb/video/hdmi_colorspace_choices:Edid(Auto) Hdmi_Rgb Itu_R_BT_709 Unknown DVI_Full_Range_RGB FCC Itu_R_BT_470_2_BG Smpte_170M Smpte_240M XvYCC_709 XvYCC_601
/proc/stb/video/hdmi_colorspace:Edid(Auto)
/proc/stb/video/policy2_choices:bestfit letterbox panscan nonlinear policy
/proc/stb/video/policy2:letterbox
/proc/stb/video/policy_choices:bestfit letterbox panscan nonlinear
/proc/stb/video/policy:panscan
/proc/stb/video/aspect_choices:any 4:3 16:9 16:10
/proc/stb/video/aspect:16:9
/proc/stb/video/videomode_preferred:pal ntsc 480i 576i 1080i 720p 480p 1080i50 1080p24 1080p30 720p50 576p 640x480 800x600 1024x768
/proc/stb/video/videomode_60hz_choices:pal ntsc 480i 576i 1080i 720p 480p 1080i50 1080p24 1080p25 1080p30 720p24 720p50 576p 640x480 800x600 1024x768 1366x768
/proc/stb/video/videomode_60hz:1080i
/proc/stb/video/videomode_50hz_choices:pal ntsc 480i 576i 1080i 720p 480p 1080i50 1080p24 1080p25 1080p30 720p24 720p50 576p 640x480 800x600 1024x768 1366x768
/proc/stb/video/videomode_50hz:1080i50
/proc/stb/video/videomode_choices:pal ntsc 480i 576i 1080i 720p 480p 1080i50 1080p24 1080p25 1080p30 720p24 720p50 576p 640x480 800x600 1024x768 1366x768
/proc/stb/video/videomode:720p
/proc/stb/hdmi/avi_scan_info_choices:no_data overscanned(tv) underscanned(pc)
/proc/stb/hdmi/avi_scan_info:overscanned(tv)
/proc/stb/hdmi/bypass_edid_checking:00000000
/proc/stb/hdmi/enable_hdmi_reset:00000001
/proc/stb/fp/wakeup_time:0
/proc/stb/fp/was_timer_wakeup:0
/proc/stb/fp/rtc:0
/proc/stb/fp/led_pattern_speed:20
/proc/stb/fp/led0_pattern:00000000
/proc/stb/fp/fan_vlt:0000000f
/proc/stb/fp/fan_pwm:00000000
/proc/stb/fp/fan_speed:1955 rpm
/proc/stb/fp/lnb_sense1:0
/proc/stb/fp/lnb_sense0:0
/proc/stb/fp/version:3
/proc/stb/tpm/0/ca/07:B41415100035000
/proc/stb/tpm/0/ca/06:20110414
/proc/stb/tpm/0/ca/09:01
/proc/stb/tpm/0/ca/05:0113
/proc/stb/tpm/0/ca/04:0009342ca389
/proc/stb/tpm/0/ca/03:000088b8
/proc/stb/tpm/0/ca/02:00
/proc/stb/tpm/0/ca/01:0f
/proc/stb/tpm/0/serial:580925285
/proc/stb/lcd/bpp:00000010
/proc/stb/lcd/yres:00000040
/proc/stb/lcd/xres:00000060
/proc/stb/lcd/oled_brightness:127
/proc/stb/avs/0/input_choices:encoder aux
/proc/stb/avs/0/input:encoder
/proc/stb/avs/0/colorformat_choices:cvbs rgb svideo yuv
/proc/stb/avs/0/colorformat:rgb
/proc/stb/avs/0/fb_choices:low high auto
/proc/stb/avs/0/fb:auto
/proc/stb/avs/0/sb_choices:0 6 12 auto
/proc/stb/avs/0/sb:auto
/proc/stb/sensors/temp0/value:44
/proc/stb/sensors/temp0/unit:C
/proc/stb/sensors/temp0/name:board
/proc/stb/info/model:dm800se
/proc/stb/frontend/0/use_scpc_optimized_search_range:00000000
/proc/stb/frontend/0/constellation_bitmap:303030303030303030303030303030f1f1f1f1f1f1f1f1f1f1f1f1f1f1f1
/proc/stb/frontend/0/lnb_sense:0
/proc/stb/frontend/0/envelope:00000001
/proc/stb/frontend/0/agc_rf:00000000
/proc/stb/frontend/0/agc_if:00000000
/proc/stb/frontend/0/static_current_limiting_choices:off on
/proc/stb/frontend/0/static_current_limiting:off

[ali ganm]

Does this help you?

[BPanther]

This is all IP connection, not the serial (COM Port) connection with the mini USB cable. As I wrote, I need a full serial log with all if you power switch on with the problem NFI or usb image.

I have now uploaded also the "normal image version" to the "Experimentell". But the kernel is the same as the clean git version. Also the repart, because the kernel is too big (4.3 MB) and does not fit to (0x3C0000 - 3.8 MB), but I test still to make it smaller.