Av7500 Err0x11 Error

Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 10615
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 171 Mal
Danksagung erhalten: 266 Mal
Kontaktdaten:

Re: Av7500 Err0x11 Error

#16

Beitrag von BPanther » Di 3. Okt 2017, 21:37

Telnet is not the real RS232 connection, because you will see with RS232 first the loader mesages and so on. There is no telnet and no network at this time, telnet is "normal" network, mostly too late for finding problems if the image hangs.

EDIT: Example output real serial RS232:

Code: Alles auswählen

#,booting... FrTs


Board: STx7105-PDK  [32-bit mode]

U-Boot 1.3.1 (Jan  9 2011 - 13:47:45) - stm24_0047
             ---created by SoLaLa---

DRAM:  256 MiB
NOR:    64 MiB
In:    serial
Out:   serial
Err:   serial
init Frontpanel... done, AV7500
Hit any key to stop autoboot:  0
bootmenu_timeout:2000,default:0

add entry:0 - Flash
add entry:1 - USB1
add entry:2 - USB2
add entry:3 - USB3
add entry:4 - USB4
add entry:5 - USB1B
add entry:6 - USB2B
add entry:7 - USB3B
add entry:8 - USB4B
add entry:9 - Flash E2
entering bootmenu - default:0 - Flash
select entry:0 - Flash
selection done
## Booting image at a0100000 ...
   Image Name:   Linux-2.6.32.61_stm24_0217
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    1814519 Bytes =   1.7 MiB
   Load Address: 80801000
   Entry Point:  80802000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/mtdblock3 rootfstype=squashfs ip=192.168.2.79:192.168.2.72:192.168.2.2:255.255.255.0:stb7105::off nwhwconf=device:eth0,hwaddr:00:1e:aa:bb:cc:dd bigphysarea=4060 stmmaceth=msglvl:0,watchdog:4000,rxsize:16 loglevel=0 - 0x00000000 - 0 ...

INIT: version 2.86 booting
INIT: Entering runlevel: 3

(none) login: BPanther-Image BASE-rev6380_HAL-rev589-exp-next_NMP-rev7423-exp-next
Mount /dev in tmpfs
Copying device nodes to /dev
Mounting local filesystems...
Cleaning /tmp.
Hostname: atevio7500.
Starting portmap daemon....
Setup Network-Interface eth0
address: 192.168.2.79 netmask 255.255.255.0 broadcast 192.168.2.255 gateway 192.168.2.2
4096+0 records in
4096+0 records out
4194304 bytes (4.0MB) copied, 0.169901 seconds, 23.5MB/s
copLoadFile (file /lib/firmware/video.elf)
ustslave: Kernel Version: 24
base_address 0x40000000
seeking to 0
seeking to 57a40
seeking to 120378
seeking to 1203b0
seeking to 1203eseeking to 12f230
seeking to 12f23c
seeking to 12f248
seeking to 1510c0
seeking to 14f0ac
seeking to 151100
4096+0 records in
4096+0 records out
4194304 bytes (4.0MB) copied, 0.179677 seconds, 22.3MB/s
copLoadFile (file /lib/firmware/audio.elf)
ustslave: Kernel Version: 24
base_address 0x40400000
seeking to 0
seeking to 5e00
seeking to 12460
seeking to 1ab60
seeking to 154300
seeking to 154338
seeking to 154370
seeking to 191a58
seeking to 191a60
seeking to 191a68
seeking to 191a70
seeking to 1aae40
seeking to 1aaf00
showSinglePic /vbootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Model: atevio7500
vBoxType: 8
Input device name: "TDT RC event driver"
Selected Remote: Fortis HDBOX RemoteControl
RemoteControl Map:
                MENU - 04 - 139ED - 4B - 398
               GREEN - 4A - 399
              YELLOW - 49 - 400
                BLUE - 48 - 401
                TEXT - 0D - 388
                 EPG - 08 - 365
              REWIND - 58 - 168
         FASTFORWARD - 5C - 208
                PLAY - 55 - 207
               PAUSE - 07 - 119
              RECORD - 56 - 167
                STOP - 54 - 128
             STANDBY - 0A - 116
                MUTE - 0C - 113
           CHANNELUP - 5E - 104
         CHANNELDOWN - 5F - 109
            VOLUMEUP - 4E - 115
          VOLUMEDOWN - 4F - 114
                INFO - 06 - 138
                  OK - 1F - 352
                  UP - 00 - 103
               RIGHT - 02 - 106
                DOWN - 01 - 108
                LEFT - 03 - 105
              RECALL - 09 - 396
                ZOOM - 0B - 372
             VFORMAT - 0E - 371
          RESOLUTION - 0F - 375
             TVRADIO - 1A - 373
               SLEEP - 1E - 409
                OPEN - 40 - 394
                 FAV - 41 - 364
               CHECK - 42 - 353
                UPUP - 43 - 414
            DOWNDOWN - 44 - 415
                NEXT - 4C - 407
                LAST - 50 - 412
                 PIP - 51 - 357
                SWAP - 52 - 354
                LIST - 53 - 370
             0BUTTON - 10 -  11
             1BUTTON - 11 -   2
             2BUTTON - 12 -   3
             3BUTTON - 13 -   4
             4BUTTON - 14 -   5
             5BUTTON - 15 -   6
             6BUTTON - 16 -   7
             7BUTTON - 17 -   8
             8BUTTON - 18 -   9
             9BUTTON - 19 -  10
Frontpanel Map:
             STANDBY - 00 - 116
                  OK - 06 - 352
                MENU - 05 - 139
            VOLUMEUP - 03 - 115
          VOLUMEDOWN - 04 - 114
           CHANNELUP - 01 - 104
         CHANNELDOWN - 02 - 109
Supports Long KeyPress: 1
processComplex >
period 140, delay 10
Using period=140 delay=10
[SEM] DOWN
[ca_ci] -> GetInstance
[ca_ci] -> cCA 2
>>> Neutrino (compiled Oct  3 2017 19:59:09)[neutrino] frameBuffer Instance created
libstb-hal debug options can be set by exporting HAL_DEBUG.
[...Neutrino starting here...]
I think you can see, that a real rs232 better is than telnet, because many things you can not see via telnet, because the network comes too late up.

And, thank you very much for testing the patched one.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755, Sony Bravia KDL-40W4500 (old)
Boxen mit NMP: 7x UFS910 (128MB), UFS912, 2x UFS913, AV700, AV7000, AV7500 (DVB-S/C/T), Edision Argus Pingulux, Vizyon820HD,
3x AX 4K HD51 (DVB-S/SX/C/T/T2), VU+DUO, VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), VU+Duo4K (DVB-S/SX (FBC)/C (FBC)),
VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), VU+Uno4KSE (DVB-S/SX/C), 2xVU+Zero4K (DVB-S/SX)

Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 10615
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 171 Mal
Danksagung erhalten: 266 Mal
Kontaktdaten:

Re: Av7500 Err0x11 Error

#17

Beitrag von BPanther » Di 3. Okt 2017, 22:08

Testing now udog's image 809/805/10467 from today...

Flashing...

Code: Alles auswählen

#,(Re)start USB...
Front USB:   scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
.
 24514983   update_w_fw.ird
==> find ird  update_w_fw.ird [24514983 ] <==

1 file(s), 0 dir(s)

==> usb_loading reading update_ww.ird
.
.
.........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
ret=> 24514983
Loader_WriteFlashData[1] size=7340032
Loader_WriteFlash size=0x700002 offset=0xb00000
.........................................................==> unprotect 0

......................................................... done
==> erase firtst 58 last 90
.....................................................................................==> protect 0
Loader_WriteFlashData[6] size=1867113
Loader_WriteFlash size=0x1c7d69 offset=0x100000
...............==> unprotect 0

............... done
==> erase firtst 8 last 16
......................==> protect 0
Loader_WriteFlashData[7] size=131072
Loader_WriteFlash size=0x20000 offset=0x1e00000
..==> unprotect 0

.. done
==> erase firtst f0 last f1
..==> protect 0
Loader_WriteFlashData[8] size=12320768
Loader_WriteFlash size=0xbc0000 offset=0x1200000
...............................................................................................==> unprotect 0

............................................................................................... done
==> erase firtst 90 last ee
..............................................................................................................................................==> protect 0
Loader_WriteFlashData[9] size=31457280
Loader_WriteFlash size=0x1e00000 offset=0x2200000
................................................................................................................................................................................................................................................==> unprotect 0

................................................................................................................................................................................................................................................ done
==> erase firtst 110 last 1ff
........................................................................................................................................................................................................................................................................................................................................................................==> protect 0
Lets see if it working...

NOPE, image does not work...

Code: Alles auswählen

#,Ts


Board: STx7105-PDK  [32-bit mode]

U-Boot 1.3.1 (Jan  9 2011 - 13:47:45) - stm24_0047
             ---created by SoLaLa---

DRAM:  256 MiB
NOR:    64 MiB
In:    serial
Out:   serial
Err:   serial
init Frontpanel... done, AV7500
Hit any key to stop autoboot:  0
bootmenu_timeout:2000,default:0

add entry:0 - Flash
add entry:1 - USB1
add entry:2 - USB2
add entry:3 - USB3
add entry:4 - USB4
add entry:5 - USB1B
add entry:6 - USB2B
add entry:7 - USB3B
add entry:8 - USB4B
add entry:9 - Flash E2
entering bootmenu - default:0 - Flash
select entry:0 - Flash
selection done
## Booting image at a0100000 ...
   Image Name:   Linux-2.6.32.71_stm24_0217
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    1867049 Bytes =   1.8 MiB
   Load Address: 80801000
   Entry Point:  80802000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/mtdblock3 rootfstype=squashfs ip=192.168.2.79:192.168.2.72:192.168.2.2:255.255.255.0:stb7105::off nwhwconf=device:eth0,hwaddr:00:1e:aa:bb:cc:dd bigphysarea=4060 stmmaceth=msglvlxsize:16 loglevel=0 - 0x00000000 - 0 ...
And end - no init, nothing. The image has a problem. :(
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755, Sony Bravia KDL-40W4500 (old)
Boxen mit NMP: 7x UFS910 (128MB), UFS912, 2x UFS913, AV700, AV7000, AV7500 (DVB-S/C/T), Edision Argus Pingulux, Vizyon820HD,
3x AX 4K HD51 (DVB-S/SX/C/T/T2), VU+DUO, VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), VU+Duo4K (DVB-S/SX (FBC)/C (FBC)),
VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), VU+Uno4KSE (DVB-S/SX/C), 2xVU+Zero4K (DVB-S/SX)

kamaxx
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 45
Registriert: So 26. Mai 2013, 14:59
Hat sich bedankt: 6 Mal
Danksagung erhalten: 5 Mal

Re: Av7500 Err0x11 Error

#18

Beitrag von kamaxx » Di 3. Okt 2017, 22:22

Oh my god :pckaffee:

The oldest one is safest and simple to understand.
Can we solve Initializing problem?

Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 10615
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 171 Mal
Danksagung erhalten: 266 Mal
Kontaktdaten:

Re: Av7500 Err0x11 Error

#19

Beitrag von BPanther » Di 3. Okt 2017, 22:28

I think its a problem with the flash build script. udog should make a change.

BTW: Does my image boot and the diseqc change working?
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755, Sony Bravia KDL-40W4500 (old)
Boxen mit NMP: 7x UFS910 (128MB), UFS912, 2x UFS913, AV700, AV7000, AV7500 (DVB-S/C/T), Edision Argus Pingulux, Vizyon820HD,
3x AX 4K HD51 (DVB-S/SX/C/T/T2), VU+DUO, VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), VU+Duo4K (DVB-S/SX (FBC)/C (FBC)),
VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), VU+Uno4KSE (DVB-S/SX/C), 2xVU+Zero4K (DVB-S/SX)

kamaxx
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 45
Registriert: So 26. Mai 2013, 14:59
Hat sich bedankt: 6 Mal
Danksagung erhalten: 5 Mal

Re: Av7500 Err0x11 Error

#20

Beitrag von kamaxx » Di 3. Okt 2017, 22:34

Image Works.I am changing some info(satellite.xml,etc,etc)
I will try diseqc 1.1(in other home) asap and inform whatever it Works or not

Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 10615
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 171 Mal
Danksagung erhalten: 266 Mal
Kontaktdaten:

Re: Av7500 Err0x11 Error

#21

Beitrag von BPanther » Di 3. Okt 2017, 22:48

Thank you very much for testing.

BTW: I and udog works on a working image... Maybe soon also running...
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755, Sony Bravia KDL-40W4500 (old)
Boxen mit NMP: 7x UFS910 (128MB), UFS912, 2x UFS913, AV700, AV7000, AV7500 (DVB-S/C/T), Edision Argus Pingulux, Vizyon820HD,
3x AX 4K HD51 (DVB-S/SX/C/T/T2), VU+DUO, VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), VU+Duo4K (DVB-S/SX (FBC)/C (FBC)),
VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), VU+Uno4KSE (DVB-S/SX/C), 2xVU+Zero4K (DVB-S/SX)

kamaxx
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 45
Registriert: So 26. Mai 2013, 14:59
Hat sich bedankt: 6 Mal
Danksagung erhalten: 5 Mal

Re: Av7500 Err0x11 Error

#22

Beitrag von kamaxx » Di 3. Okt 2017, 23:28

This time diseqc 1.1 ist OKey :beerdrink:

I am looking forward to seeing new images.

The last question for this night
I found this lines to load themes.Are paths right and Is there more theme files?

Themes: usr/share/tuxbox/neutrino/themes
Icons: usr/share/tuxbox/neutrino/icons
Fonts: usr/share/fonts

Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 10615
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 171 Mal
Danksagung erhalten: 266 Mal
Kontaktdaten:

Re: Av7500 Err0x11 Error

#23

Beitrag von BPanther » Di 3. Okt 2017, 23:46

Thank you very much again for testing. The next "official" release will also have the fix. ;)

The paths are right, for logos there is a short link /logos. All available themes are inside the images, but you can create and save your own at the color settings (menu, settings, osd, color).
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755, Sony Bravia KDL-40W4500 (old)
Boxen mit NMP: 7x UFS910 (128MB), UFS912, 2x UFS913, AV700, AV7000, AV7500 (DVB-S/C/T), Edision Argus Pingulux, Vizyon820HD,
3x AX 4K HD51 (DVB-S/SX/C/T/T2), VU+DUO, VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), VU+Duo4K (DVB-S/SX (FBC)/C (FBC)),
VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), VU+Uno4KSE (DVB-S/SX/C), 2xVU+Zero4K (DVB-S/SX)

kamaxx
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 45
Registriert: So 26. Mai 2013, 14:59
Hat sich bedankt: 6 Mal
Danksagung erhalten: 5 Mal

Re: Av7500 Err0x11 Error

#24

Beitrag von kamaxx » Mi 4. Okt 2017, 00:49

@Udog,


I have just tried your last image here
http://udog.dyn.vh0st.me/images/atevio7 ... MP-rev.zip

Unfortunately,Same error occured

Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 10615
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 171 Mal
Danksagung erhalten: 266 Mal
Kontaktdaten:

Re: Av7500 Err0x11 Error

#25

Beitrag von BPanther » Mi 4. Okt 2017, 01:03

udogs Images won't work - we know and we know what the problem is. We need more testing and time to fix it. Maybe in a few days, sorry...
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755, Sony Bravia KDL-40W4500 (old)
Boxen mit NMP: 7x UFS910 (128MB), UFS912, 2x UFS913, AV700, AV7000, AV7500 (DVB-S/C/T), Edision Argus Pingulux, Vizyon820HD,
3x AX 4K HD51 (DVB-S/SX/C/T/T2), VU+DUO, VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), VU+Duo4K (DVB-S/SX (FBC)/C (FBC)),
VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), VU+Uno4KSE (DVB-S/SX/C), 2xVU+Zero4K (DVB-S/SX)

Benutzeravatar
udog
Moderator
Moderator
Beiträge: 1323
Registriert: Mi 6. Jul 2011, 11:18
Wohnort: Thüringer (Altenburger Land)
Hat sich bedankt: 71 Mal
Danksagung erhalten: 25 Mal
Kontaktdaten:

Re: Av7500 Err0x11 Error

#26

Beitrag von udog » Do 5. Okt 2017, 10:46

aktualisierte neue Test-Version liegt auf Server :wink_:freiwillige vortreten :smoking:
atevio7500_BASE-rev810_HAL-rev_NMP-rev10467.zip 2017-10-05 09:28 23 mb

kamaxx
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 45
Registriert: So 26. Mai 2013, 14:59
Hat sich bedankt: 6 Mal
Danksagung erhalten: 5 Mal

Re: Av7500 Err0x11 Error

#27

Beitrag von kamaxx » Do 5. Okt 2017, 14:08

Ich versuche es jetzt :)

kamaxx
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 45
Registriert: So 26. Mai 2013, 14:59
Hat sich bedankt: 6 Mal
Danksagung erhalten: 5 Mal

Re: Av7500 Err0x11 Error

#28

Beitrag von kamaxx » Do 5. Okt 2017, 14:59

@Udog,


:applaus:

At last, Its allright

I cant see any emu menu. Is it ignored?

Benutzeravatar
DboxOldie
Co-Admin
Co-Admin
Beiträge: 5181
Registriert: Sa 6. Aug 2011, 15:21
Hat sich bedankt: 51 Mal
Danksagung erhalten: 172 Mal

Re: Av7500 Err0x11 Error

#29

Beitrag von DboxOldie » Do 5. Okt 2017, 15:40

Well another try of an image, you find it here: http://dual.franken.bplaced.de/ufs913/
( of course the atevio7500... :wink: )
Hopefully it will start and rcS is allright...
Your wanted Menu is to find in : Extra Options

For more fine tuning I need some informations from various telnet requests, when a BPanther Neutrino is running.
MfG DboxOldie

KEIN SUPPORT PER PN > Bitte das Forum benutzen und ins Wiki schauen

Bild

kamaxx
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 45
Registriert: So 26. Mai 2013, 14:59
Hat sich bedankt: 6 Mal
Danksagung erhalten: 5 Mal

Re: Av7500 Err0x11 Error

#30

Beitrag von kamaxx » Do 5. Okt 2017, 16:04

DboxOldie hat geschrieben:
Do 5. Okt 2017, 15:40
Well another try of an image, you find it here: http://dual.franken.bplaced.de/ufs913/
( of course the atevio7500... :wink: )
Hopefully it will start and rcS is allright...
Your wanted Menu is to find in : Extra Options

For more fine tuning I need some informations from various telnet requests, when a BPanther Neutrino is running.
@DboxOldie,

Jetzt arbeit ,


It's interseting that No extra Options section(menu 0)

You wrote;
"For more fine tuning I need some informations from various telnet requests, when a BPanther Neutrino is running."

I am ready whenever you want.

Antworten

Zurück zu „AV7500 / Octagon 1028 - IRD“