failure 139 NMP 5867

Antworten
Volvo70
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 12
Registriert: Do 21. Mär 2013, 16:00
Hat sich bedankt: 0
Danksagung erhalten: 0

failure 139 NMP 5867

#1

Beitrag von Volvo70 »

Hallo,

Tried this software this morning but somehow during the configuration phase, related to the new tuner configuration, it provides the failure code 139.
Normally I select disecq 1.1 for a mono block from Canaal Digitaal with 19.3/23.5 facility and afterward adjust LNB 19.3 = 1 AND 23.5 = 2. This is working
but after going further in the initialisation phase it provides everytime this failure code 139. Starts a new initialisation.... selecting language etc.

Installed once again the software but unfortuantely this doesn't cure the problem.
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: failure 139 NMP 5867

#2

Beitrag von BPanther »

Just skip the install wizard and make the settings later via Menu->Service->channel scan... Maybe this works better.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Antworten

Zurück zu „UFS910 - FLASH (stm24) - ALTE Versionen v1/v2“