kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/4 !?

Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 11773
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 362 Mal
Danksagung erhalten: 580 Mal
Kontaktdaten:

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#16

Beitrag von BPanther »

Kannst Du auch machen mit setconsole. Poste gleich dazu nochmal Deine derzeitigen Bootargs, vielleicht kann man da doch nochwas dran machen damit es seriell auch wieder passt.

Muß aber erstmal ins Bett wg. Nachtschicht...
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x DM8000
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)),
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
jaro44
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 25
Registriert: Di 8. Okt 2013, 14:29
Wohnort: POLSKA
Hat sich bedankt: 0
Danksagung erhalten: 3 Mal

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#17

Beitrag von jaro44 »

Some time ago I wrote that I have same in Cuberevo (9000HD) with Conexant (no signal on most transponders dvb-s2 from HB 13E)
on Cuberevo-MINI2 (910HD) with sharp is all ok
ghani123
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 264
Registriert: Do 19. Jan 2012, 01:01
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#18

Beitrag von ghani123 »

which are the transponders of HB at hotbird?
Bild
ghani123
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 264
Registriert: Do 19. Jan 2012, 01:01
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#19

Beitrag von ghani123 »

hier ist der log von start an:

Code: Alles auswählen

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:                                                                        :
:            o  o  ooooo  ooooo  o   o  oooo  ooooo  o  ooooo            :
:            o o   o   o    o    o   o  o  o  o      o  o   o            :
:            oo    ooooo    o    ooooo  oooo  oooo   o  o   o            :
:            o o   o   o    o    o   o  o o   o      o  o   o            :
:            o  o  o   o    o    o   o  o  o  ooooo  o  o   o            :
:                                                                        :
:            UFS-910 - Kernel 2.6.32.59_stm24_0211 (00:00:13)            :
:                                                                        :
:            Willkommen beim Neutrino-Image  --  BPanther MOD            :
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

cuberevo-mini2 login: root


BusyBox v1.21.1 (2013-12-07 05:28:48 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

cuberevo-mini2:~# killall -9 rcS
o
neutrinokillall: rcS: no process killed
cuberevo-mini2:~# killall -9 neutrino
killall: neutrino: no process killed
cuberevo-mini2:~# neutrino
>>> Neutrino (compiled Dec  7 2013 05:46:25) <<<
[neutrino] frameBuffer Instance created
libstb-hal debug options can be set by exporting HAL_DEBUG.
The following values (or bitwise OR combinations) are valid:
        component: audio   0x01
        component: video   0x02
        component: demux   0x04
        component: play    0x08
        component: power   0x10
        component: init    0x20
        component: ca      0x40
        component: record  0x80
        all components:    0xff
[LT:00000000:init  ] init_td_api begin, initialized=0, debug=0x00
[LT:00000000:init  ] init_td_api end
12288k video mem
CFrameBuffer::setMode avail: 12582912 active: 1
FB: 1280x720x32 line length 5120. Not using nevis GXA accelerator.
[neutrino start] 2027  ->     0 ms
[LT:00000000:init  ] init_td_api begin, initialized=1, debug=0x00
[LT:00000000:init  ] init_td_api end
[neutrino start] 2032  ->     1 ms
[english.locale] missing entry: audioplayer.screensaver_dir
[english.locale] missing entry: mainmenu.channels
[english.locale] missing entry: mainmenu.standby
[english.locale] missing entry: menu.hint_audioplayer_screensaver_dir
[english.locale] missing entry: menu.hint_channellist_hdicon
[english.locale] missing entry: menu.hint_infobar_dotmatrix
[english.locale] missing entry: menu.hint_shairport
[english.locale] missing entry: menu.hint_standby
[english.locale] missing entry: miscsettings.infobar_dotmatrix_display
***************************** rec dir /hdd/movie timeshift dir /hdd/timeshift
[neutrino start] 2041  ->  4268 ms
[neutrino.cpp] executing /var/tuxbox/config/deepstandby.off.
[neutrino CEC Settings] setCECSettings init CEC settings...
[deutsch.locale] missing entry: menu.hint_shairport
[neutrino start] 2058  ->  6901 ms
[neutrino] settings font file /usr/share/fonts/neutrino.ttf
[neutrino] font family Arial Narrow
[neutrino] font family Arial Narrow
[neutrino start] 2062  ->  7084 ms
[neutrino start] 2064  ->  7084 ms
[neutrino start] 2070  ->  7635 ms
CVFD::setlcdparameter dimm 15 power 1
CVFD::showServicename:
CVFD::ShowScrollText: [Neutrino wird gestartet...]
[neutrino start] 2075  ->  7637 ms
[frontend.cpp:Open:226] [fe0] /dev/dvb/adapter0/frontend0 fd 7 type 0
[femanager.cpp:Init:100] add fe 0
[frontend.cpp:Open:222] /dev/dvb/adapter0/frontend1: No such file or directory
[frontend.cpp:Open:222] /dev/dvb/adapter0/frontend2: No such file or directory
[frontend.cpp:Open:222] /dev/dvb/adapter0/frontend3: No such file or directory
[femanager.cpp:Init:116] found 1 frontends, 4 demuxes

[zapit] Loading services, channel size 216 ..
[getservices.cpp:LoadServices:732] Loading satellites...
[zapit] 16738 services loaded (16738)...
[zapit] service loading took: 7807 msec
[zapit] duplicate in all transponders: tp-id 2dc700c000030085 freq 11719000 rate
 27500000 fec 3 pol 0
[getservices]: replacing 'Sky Sport News' (sid=0xf1): succeded.
[getservices]: replacing 'Sky Select 3' (sid=0x10f): succeded.
[getservices]: replacing 'Sky Bundesliga 3' (sid=0x110): succeded.
[getservices]: replacing 'Sky Sport 4' (sid=0x111): succeded.
[getservices]: replacing 'Sky Select 4' (sid=0x119): succeded.
[getservices]: replacing 'Sky Bundesliga 4' (sid=0x11a): succeded.
[getservices]: replacing 'Sky Sport 5' (sid=0x11b): succeded.
[getservices]: replacing 'Sky Select 5' (sid=0x123): succeded.
[getservices]: replacing 'Sky Bundesliga 5' (sid=0x124): succeded.
[getservices]: replacing 'Sky Sport 6' (sid=0x125): succeded.
[getservices]: replacing 'Sky Select 6' (sid=0x12d): succeded.
[getservices]: replacing 'Sky Bundesliga 6' (sid=0x12e): succeded.
[getservices]: replacing 'Sky Sport 7' (sid=0x12f): succeded.
[zapit] duplicate in all transponders: tp-id 2dee00c000110085 freq 11758000 rate
 27500000 fec 3 pol 0
[getservices]: replacing 'Sky Select 7' (sid=0x137): succeded.
[getservices]: replacing 'Sky Bundesliga 7' (sid=0x138): succeded.
[getservices]: replacing 'Sky Sport 8' (sid=0x139): succeded.
[getservices]: replacing 'Sky Select 8' (sid=0x141): succeded.
[getservices]: replacing 'Sky Bundesliga 8' (sid=0x142): succeded.
[getservices]: replacing 'Sky Sport 9' (sid=0x143): succeded.
[getservices]: replacing 'Sky Select 9' (sid=0x14b): succeded.
[getservices]: replacing 'Sky Bundesliga 9' (sid=0x14c): succeded.
[getservices]: replacing 'Sky Sport 10' (sid=0x14d): succeded.
[getservices]: replacing 'Sky Select Event B' (sid=0x14e): succeded.
[zapit] duplicate in all transponders: tp-id 2e1500c000020085 freq 11797000 rate
 27500000 fec 3 pol 0
[getservices]: replacing 'Sky Select 1' (sid=0xfb): succeded.
[getservices]: replacing 'Sky Bundesliga 10' (sid=0xfc): succeded.
[getservices]: replacing 'Sky Sport 11' (sid=0xfd): succeded.
[getservices]: replacing 'Sky Select Event A' (sid=0xfe): succeded.
[getservices]: replacing 'Sky Select 2' (sid=0x105): succeded.
[getservices]: replacing 'Sky Bundesliga 2' (sid=0x106): succeded.
[getservices]: replacing 'Sky Sport 3' (sid=0x107): succeded.
[zapit] duplicate in all transponders: tp-id 2f2600c000010085 freq 12070000 rate
 27500000 fec 3 pol 0
[getservices]: replacing 'Blue Movie 1' (sid=0x159): succeded.
[getservices]: replacing 'Blue Movie 2' (sid=0x163): succeded.
[getservices]: replacing 'Blue Movie 3' (sid=0x16d): succeded.
[zapit] duplicate in all transponders: tp-id 301000c0000c0085 freq 12304000 rate
 27500000 fec 18 pol 0
[getservices]: replacing 'Sky Sport News HD' (sid=0xf2): succeded.
[getservices]: replacing 'Sky Bundesliga HD 4' (sid=0x11f): succeded.
[getservices]: replacing 'Sky Sport HD 5' (sid=0x120): succeded.
[zapit.cpp:PrepareChannels:1059] LoadServices: success
[bouquets.cpp:parseBouquetsXml:363] reading bouquets from /var/tuxbox/config/zap
it/bouquets.xml
[bouquets.cpp:parseBouquetsXml:421] total: 1 bouquets
[bouquets.cpp:parseBouquetsXml:363] reading bouquets from /var/tuxbox/config/zap
it/ubouquets.xml

[zapit] service loading took: 7807 msec
[zapit] duplicate in all transponders: tp-id 2dc700c000030085 freq 11719000 rate
 27500000 fec 3 pol 0
[getservices]: replacing 'Sky Sport News' (sid=0xf1): succeded.
[getservices]: replacing 'Sky Select 3' (sid=0x10f): succeded.
[getservices]: replacing 'Sky Bundesliga 3' (sid=0x110): succeded.
[getservices]: replacing 'Sky Sport 4' (sid=0x111): succeded.
[getservices]: replacing 'Sky Select 4' (sid=0x119): succeded.
[getservices]: replacing 'Sky Bundesliga 4' (sid=0x11a): succeded.
[getservices]: replacing 'Sky Sport 5' (sid=0x11b): succeded.
[getservices]: replacing 'Sky Select 5' (sid=0x123): succeded.
[getservices]: replacing 'Sky Bundesliga 5' (sid=0x124): succeded.
[getservices]: replacing 'Sky Sport 6' (sid=0x125): succeded.
[getservices]: replacing 'Sky Select 6' (sid=0x12d): succeded.
[getservices]: replacing 'Sky Bundesliga 6' (sid=0x12e): succeded.
[getservices]: replacing 'Sky Sport 7' (sid=0x12f): succeded.
[zapit] duplicate in all transponders: tp-id 2dee00c000110085 freq 11758000 rate
 27500000 fec 3 pol 0
[getservices]: replacing 'Sky Select 7' (sid=0x137): succeded.
[getservices]: replacing 'Sky Bundesliga 7' (sid=0x138): succeded.
[getservices]: replacing 'Sky Sport 8' (sid=0x139): succeded.
[getservices]: replacing 'Sky Select 8' (sid=0x141): succeded.
[getservices]: replacing 'Sky Bundesliga 8' (sid=0x142): succeded.
[getservices]: replacing 'Sky Sport 9' (sid=0x143): succeded.
[getservices]: replacing 'Sky Select 9' (sid=0x14b): succeded.
[getservices]: replacing 'Sky Bundesliga 9' (sid=0x14c): succeded.
[getservices]: replacing 'Sky Sport 10' (sid=0x14d): succeded.
[getservices]: replacing 'Sky Select Event B' (sid=0x14e): succeded.
[zapit] duplicate in all transponders: tp-id 2e1500c000020085 freq 11797000 rate
 27500000 fec 3 pol 0
[getservices]: replacing 'Sky Select 1' (sid=0xfb): succeded.
[getservices]: replacing 'Sky Bundesliga 10' (sid=0xfc): succeded.
[getservices]: replacing 'Sky Sport 11' (sid=0xfd): succeded.
[getservices]: replacing 'Sky Select Event A' (sid=0xfe): succeded.
[getservices]: replacing 'Sky Select 2' (sid=0x105): succeded.
[getservices]: replacing 'Sky Bundesliga 2' (sid=0x106): succeded.
[getservices]: replacing 'Sky Sport 3' (sid=0x107): succeded.
[zapit] duplicate in all transponders: tp-id 2f2600c000010085 freq 12070000 rate
 27500000 fec 3 pol 0
[getservices]: replacing 'Blue Movie 1' (sid=0x159): succeded.
[getservices]: replacing 'Blue Movie 2' (sid=0x163): succeded.
[getservices]: replacing 'Blue Movie 3' (sid=0x16d): succeded.
[zapit] duplicate in all transponders: tp-id 301000c0000c0085 freq 12304000 rate
 27500000 fec 18 pol 0
[getservices]: replacing 'Sky Sport News HD' (sid=0xf2): succeded.
[getservices]: replacing 'Sky Bundesliga HD 4' (sid=0x11f): succeded.
[getservices]: replacing 'Sky Sport HD 5' (sid=0x120): succeded.
[zapit.cpp:PrepareChannels:1059] LoadServices: success
[bouquets.cpp:parseBouquetsXml:363] reading bouquets from /var/tuxbox/config/zap
it/bouquets.xml
[bouquets.cpp:parseBouquetsXml:421] total: 1 bouquets
[bouquets.cpp:parseBouquetsXml:363] reading bouquets from /var/tuxbox/config/zap
it/ubouquets.xml
^H[bouquets.cpp:parseBouquetsXml:421] total: 186 bouquets
############## CBouquetManager::makeRemainingChannelsBouquet: numbers start at:
tv 1 radio 1 ############
[zapit] bouquet loading took: 125458 msec
[zapit.cpp:Start:2486] channels have been loaded succesfully
[zapit.cpp] diseqc type = 0
[femanager.cpp:loadSettings:242] load config for fe0
[femanager.cpp:linkFrontends:401] linking..
[femanager.cpp:linkFrontends:453] Frontend #0: is independent
[fe0] voltage 13
[fe0] tone off
[fe0] FE_SET_TONE took: 212 msec (min 212 max 212)
[frontend.cpp:setDiseqcType:944] fe0: NO_DISEQC
[neutrino start] 2095  -> 144470 ms
[neutrino start] 2103  -> 144471 ms
[zapit] starting... tid 1402
[zapit] sdt monitor started
[neutrino VideoSettings] setupVideoSystem setup videosystem...
[LT:00792398:video ] SetVideoSystem: old: '720p50' new: 'pal'
[LT:00000000:video ] hdmi_out(0)
[LT:00000000:video ] hdmi_out(1)
[neutrino VideoSettings] setVideoSettings init video settings...
[neutrino start] 2113  -> 145296 ms
CRCInput::open: /dev/input/event0 fd 16
[zapit.cpp:leaveStandby:2329] standby 1 recording 0
[zapit.cpp:ZapIt:527] [zapit] zap to Hustler TV CZ (c784045f00353254 tp 31b100c0
045f0035)
[femanager.cpp:getFrontend:634] Check fe0: mode 1 locked 0 freq 0 TP 0 - channel
 freq 12721 TP 31b100c0045f0035
[femanager.cpp:getFrontend:644] Selected fe: 0
[LT:00000000:demux ] SetSource(1, 0) => 0 to 0
[zapit.cpp:StopPlayBack:2262] standby 0 playing 0 forced 0
[LT:00000000:demux ] SetSource(0, 0) => 0 to 0
[fe0] sat pos 0 -> 192 motor pos 0 -> 0 usals off
[fe0] voltage 18
[fe0] tone on
[fe0] FE_SET_TONE took: 212 msec (min 212 max 212)
[fe0] tune to 12721000 DVB-S2 8PSK 3/4 H/L srate 22000000 (tuner 2121000 offset
10600000 timeout 4000)
[fe0] FE_HAS_SIGNAL
[fe0] ############################## poll timeout, time: 4900 msec (min 2000 max
 4900)
timerd startup, tid 1430
[neutrino] g_info.has_fan: 0
[ 16:11:11.301 ] reader_thread stopped
[LT:0078ddd8:demux ] Stop #0: not open!
CStreamManager::Listen: on 31339, fd 19 (210944)
Starting STREAM thread keeper, tid 1437
16:11:11.307 [sectionsd] start
[sectionsd] Caching: 2 days, 2 hours Extended Text, max 10000 events, Events are
 old 2 hours after end time
[sectionsd] NTP: disabled, server time.fu-berlin.de, command /usr/sbin/rdate -s
[yhttpd] Webserver nhttpd/3.4.0 (yhttpd_core/1.3.2) tid 1436
[ 16:11:11.313 ] dvbsub_thread started
[ 16:11:11.313 ] cDvbSubtitleConverter: new converter
[dvbsub @ 0x79b440] Invalid extradata, subtitle streams may be combined!
16:11:11.324 [sectionsd] starting
SIevent size: 156
====> USING SLOW ADDEVENT. export 'NO_SLOW_ADDEVENT=1' to avoid <===
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
16:11:11.327 Add channel 0x0640013e3dba, mask 0xffffffffffff to NoDVBTimelist
[neutrino start] 2217  -> 151186 ms
[neutrino start] 2234  -> 151186 ms
16:11:11.328 Add channel 0x32c8013e3914, mask 0xffffffffffff to NoDVBTimelist
16:11:11.356 Add channel 0x1f40013e0ca5, mask 0xffffffffffff to NoDVBTimelist
16:11:11.357 Add channel 0x125000640010, mask 0xffffffffffff to NoDVBTimelist
16:11:11.400 timeThread::run:: starting, pid 873 (742184064)
[LT:0079d718:demux ] _open: setting /dev/dvb/adapter0/demux0 to source 0
16:11:11.403 timeThread: Time set FAILED (enabled: ntp 0 dvb 0)
16:11:11.409 eitThread::run:: starting, pid 873 (826070144)
16:11:11.413 cnThread::run:: starting, pid 873 (834458752)
16:11:11.414 freeSatThread::run:: starting, pid 873 (842847360)
[neutrino start] 2245  -> 151389 ms
[neutrino] menue setup
[neutrino] init menus...
[neutrino] mediaplayer menu instance created
[network config] Instance created
[neutrino] ScanSetup Instance created
playback_libeplayer3.cpp:cPlayback
[mb]->refreshFilterList 20
[neutrino CMoviePlayerGui] Instance created...
[neutrino start] 2250  -> 151926 ms
[neutrino] registering as event client
[neutrino] had to wait 0 ms for timerd start...
[yhttpd] Webserver starting...
CHDDDestExec: checking /sys/block/sda
CHDDDestExec: /dev/sda is not a hdd, no sleep needed
[neutrino start] 2288  -> 152089 ms
[neutrino] Creating channels lists...
[neutrino] got 14094 TV and 2644 RADIO channels
[neutrino] all channels took: 91 msec
16:11:12.404 timeThread: Time set FAILED (enabled: ntp 0 dvb 0)
[neutrino] created Hispasat 1C/1D/1E (30.0W) bouquet with 534 TV and 103 RADIO c
hannels
[neutrino] sat took: 224 msec
[neutrino] created SES 4 (22.0W) bouquet with 21 TV and 40 RADIO channels
[neutrino] sat took: 268 msec
[neutrino] created Telstar 12 (15.0W) bouquet with 90 TV and 10 RADIO channels
[neutrino] sat took: 312 msec
[neutrino] created Eutelsat 12 West A (12.5W) bouquet with 129 TV and 15 RADIO c
hannels
[neutrino] sat took: 327 msec
[neutrino] created Sat 10.2 W bouquet with 26 TV and 0 RADIO channels
[neutrino] sat took: 357 msec
[neutrino] created Eutelsat 8WA (8.0W) bouquet with 35 TV and 7 RADIO channels
[neutrino] sat took: 372 msec
[neutrino] created Eutelsat 7WA (7.2W) bouquet with 15 TV and 3 RADIO channels
[neutrino] sat took: 387 msec
[neutrino] created Eutelsat 7 West A / Nilesat 102/201 (7.0W) bouquet with 1339
TV and 186 RADIO channels
[neutrino] sat took: 404 msec
[neutrino] created Eutelsat 5 West A (5.0W) bouquet with 194 TV and 114 RADIO ch
annels
[neutrino] sat took: 419 msec
[neutrino] created Intelsat 10-02/Thor (0.8W) bouquet with 817 TV and 119 RADIO
channels
[neutrino] sat took: 463 msec
[neutrino] created Eutelsat 3D (3.1E) bouquet with 21 TV and 5 RADIO channels
[neutrino] sat took: 493 msec
[neutrino] created Astra 4A / SES 5 (4.8E) bouquet with 342 TV and 23 RADIO chan
nels
[neutrino] sat took: 508 msec
[neutrino] created Eutelsat 7A (7.0E) bouquet with 335 TV and 57 RADIO channels
[neutrino] sat took: 523 msec
[neutrino] created Eutelsat 9A (9.0E) bouquet with 332 TV and 74 RADIO channels
[neutrino] sat took: 539 msec
[neutrino] created Eutelsat 10A (10.0E) bouquet with 169 TV and 14 RADIO channel
s
[neutrino] sat took: 555 msec
[neutrino] created Hotbird 13A/13B/13C (13.0E) bouquet with 3429 TV and 560 RADI
O channels
[neutrino] sat took: 574 msec
[neutrino] created Eutelsat 16A/16B (16.0E) bouquet with 500 TV and 89 RADIO cha
nnels
[neutrino] sat took: 589 msec
[neutrino] created Astra 1KR/1L/1M/2C (19.2E) bouquet with 2348 TV and 319 RADIO
 channels
[neutrino] sat took: 606 msec
[neutrino] created Eutelsat 21B (21.6E) bouquet with 62 TV and 11 RADIO channels
[neutrino] sat took: 650 msec
[neutrino] created Astra 3B (23.5E) bouquet with 501 TV and 197 RADIO channels
[neutrino] sat took: 666 msec
[neutrino] created Eutelsat 25A (25.5E) bouquet with 101 TV and 27 RADIO channel
s
[neutrino] sat took: 681 msec
[neutrino] created Badr 4/5/6 (26.0E) bouquet with 539 TV and 183 RADIO channels
[neutrino] sat took: 697 msec
[neutrino] created Eutelsat 28A/28B / Astra 1N/2A/2D/2F (28.2E) bouquet with 117
6 TV and 197 RADIO channels
[neutrino] sat took: 713 msec
[neutrino] created Arabsat 5A (30.5E) bouquet with 5 TV and 0 RADIO channels
[neutrino] sat took: 742 msec
[neutrino] created Eutelsat 36A/36B (36.0E) bouquet with 255 TV and 6 RADIO chan
nels
[neutrino] sat took: 788 msec
[neutrino] created Hellas Sat 2 (39.0E) bouquet with 370 TV and 93 RADIO channel
s
[neutrino] sat took: 818 msec
[neutrino] created Turksat 2A/3A (42.0E) bouquet with 409 TV and 192 RADIO chann
els
[neutrino] sat took: 834 msec
[neutrino] got 1210 HD channels
[neutrino] got 547 removed TV channels
16:11:13.408 timeThread: Time set FAILED (enabled: ntp 0 dvb 0)
[neutrino] got 93 removed RADIO channels
[neutrino] sats took: 1161 msec
[neutrino] got 149 TV and 4 RADIO bouquets
[neutrino] took: 1185 msec
CNeutrinoApp::SetChannelMode 0 [tv]
[neutrino.cpp:SetChannelMode:1719] newmode 0 sort old -1 new 2
[neutrino.cpp:tvMode:3811] rezap 1 current mode 1
CVFD::showServicename:
StopAutoRecord: autoshift 0
CNeutrinoApp::SetChannelMode 0 [tv]
[neutrino.cpp:SetChannelMode:1719] newmode 0 sort old -1 new 2
**************************** CChannelList::zapTo_ChannelID c784045f00353254
**************************** CChannelList::zapToChannel me 0x82dee8 Alle Kan├جle
 tuned 268435455 new Hustler TV CZ -> c784045f00353254
StopAutoRecord: autoshift 0
CChannelList::adjustToChannelID me 0x82dee8 [Alle Kan├جle] list size 14094 chann
el_id c784045f00353254
[zapit.cpp:ZapIt:527] [zapit] zap to Hustler TV CZ (c784045f00353254 tp 31b100c0
045f0035)
[femanager.cpp:getFrontend:634] Check fe0: mode 1 locked 0 freq 12721000 TP 31b1
00c0045f0035 - channel freq 12721 TP 31b100c0045f0035
[femanager.cpp:getFrontend:644] Selected fe: 0
[LT:00000000:demux ] SetSource(1, 0) => 0 to 0
[zapit] saving channel, apid 0 sub pid 0 mode 0 volume 40
[zapit.cpp:StopPlayBack:2262] standby 0 playing 0 forced 0
[LT:00000000:demux ] SetSource(0, 0) => 0 to 0
[fe0] sat pos 0 -> 192 motor pos 0 -> 0 usals off
[fe0] tone off
16:11:13.500 [sectionsd] commandserviceChanged: Service change to c784045f003532
54 demux #0
changeDMX: for 0x4e not ignored! even though real_pauseCounter> 0 (1)
changeDMX: for 0x50 not ignored! even though real_pauseCounter> 0 (1)
changeDMX: for 0x60 not ignored! even though real_pauseCounter> 0 (1)
16:11:13.503 timeThread: getting DVB time (isOpen 1)
[neutrino start] 2295  -> 153355 ms
################################## after all ##################################:
 153367 msec
[neutrino] initialized everything
[CPlugins] could not find startup.cfg
[neutrino] StopSubtitles
[fe0] FE_SET_TONE took: 242 msec (min 212 max 242)
/hdd/movie: Unknown File system type 0x73717368
[fe0] tone on
/hdd/movie: Unknown File system type 0x73717368
showChannelLogo: logo_available: 0 file:
after showchannellogo, mode = 5 ret = 0 logo_ok = 0
CRemoteControl::handleMsg: EVT_TUNE_COMPLETE (0000000000000000)
16:11:13.892 [sectionsd] commandserviceChanged: Service change to c784045f003532
54 demux #0
[fe0] FE_SET_TONE took: 239 msec (min 212 max 242)
/hdd/movie: Unknown File system type 0x73717368
[fe0] tune to 12721000 DVB-S2 8PSK 3/4 H/L srate 22000000 (tuner 2121000 offset
10600000 timeout 4000)
[fe0] FE_HAS_SIGNAL
/hdd/movie: Unknown File system type 0x73717368
/hdd/movie: Unknown File system type 0x73717368
/hdd/movie: Unknown File system type 0x73717368
/hdd/movie: Unknown File system type 0x73717368
/hdd/movie: Unknown File system type 0x73717368
[fe0] ############################## poll timeout, time: 4931 msec (min 2000 max
 4931)
CRemoteControl::handleMsg: EVT_TUNE_COMPLETE (0000000000000000)
16:11:18.936 [sectionsd] commandserviceChanged: Service change to c784045f003532
54 demux #0
/hdd/movie: Unknown File system type 0x73717368
/hdd/movie: Unknown File system type 0x73717368
CVFD::showServicename: (Hustler TV CZ)
zap failed!
/hdd/movie: Unknown File system type 0x73717368
/hdd/movie: Unknown File system type 0x73717368
/hdd/movie: Unknown File system type 0x73717368
/hdd/movie: Unknown File system type 0x73717368
/hdd/movie: Unknown File system type 0x73717368
StartSubtitles: Show
[dvb-sub] ***************************************** start, stopped 1 pid 0
TuxTxt subtitle unpause, running 0 pid 0 page 0
[LT:0079d718:demux ] Read read: Connection timed out fd:24, ev:0x0 DMX_PSI pid:0
x0014 flt:0x70
16:11:43.505 timeThread: getting DVB time done : -1 messaging_neutrino_sets_time
 1
16:11:43.505 timeThread: Time set FAILED (enabled: ntp 0 dvb 1)
16:11:44.509 timeThread: getting DVB time (isOpen 1)
mit setconsole bei kanalsuchlauf

Code: Alles auswählen


::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:                                                                        :
:            o  o  ooooo  ooooo  o   o  oooo  ooooo  o  ooooo            :
:            o o   o   o    o    o   o  o  o  o      o  o   o            :
:            oo    ooooo    o    ooooo  oooo  oooo   o  o   o            :
:            o o   o   o    o    o   o  o o   o      o  o   o            :
:            o  o  o   o    o    o   o  o  o  ooooo  o  o   o            :
:                                                                        :
:            UFS-910 - Kernel 2.6.32.59_stm24_0211 (16:51:03)            :
:                                                                        :
:            Willkommen beim Neutrino-Image  --  BPanther MOD            :
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

cuberevo-mini2 login: root


BusyBox v1.21.1 (2013-12-07 05:28:48 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

cuberevo-mini2:~# setconsole
cuberevo-mini2:~# data[0] 0xe0, data[1] 0x26
KEY: 8B - MENU
pRead < 0032008B
****        46468 10 ****
[SEM] UP
KEY_PRESS - 8b 10
++++            0 ms ++++
[neutrino] StopSubtitles
data[0] 0xe0, data[1] 0x26
KEY: 8B - MENU
pRead < 0032008B
****           54 10 ****
data[0] 0xe0, data[1] 0x26
KEY: 8B - MENU
pRead < 0032008B
****           45 10 ****
++++           53 ms ++++
data[0] 0xe0, data[1] 0x26
KEY: 8B - MENU
pRead < 0032008B
****           54 10 ****
data[0] 0xe0, data[1] 0xff
++++           99 ms ++++
KEY_RELEASE - 8b 00 10 10 CAUSE=Timeout
----          152 ms ----
[SEM] DOWN
data[0] 0xe0, data[1] 0x1f
KEY: 160 - OK
pRead < 00330160
****         1276 11 ****
[SEM] UP
KEY_PRESS - 160 11
++++            0 ms ++++
data[0] 0xe0, data[1] 0x1f
KEY: 160 - OK
pRead < 00330160
****           51 11 ****
data[0] 0xe0, data[1] 0x1f
KEY: 160 - OK
pRead < 00330160
****           52 11 ****
++++           47 ms ++++
data[0] 0xe0, data[1] 0xff
KEY_RELEASE - 160 00 11 11 CAUSE=Timeout
----          152 ms ----
[SEM] DOWN
data[0] 0xe0, data[1] 0x1f
KEY: 160 - OK
pRead < 00340160
****          672 12 ****
[SEM] UP
KEY_PRESS - 160 12
++++            0 ms ++++
[neutrino] CScanSetup::exec:
[neutrino] CScanSetup exec: init scan setup (Mode: 0)...
[zapit] GetConfig...
[neutrino] CScanSetup call showScanMenu...
[neutrino] CScanSetup call getSatMenuListWidth...
C: 0 S: 1 T: 0
[neutrino] CScanSetup call addScanMenuAutoScan...
[neutrino] CScanSetup call addListFlagsItems...
[neutrino] CScanSetup call addScanMenuManualScan...
[neutrino] CScanSetup call addScanOptionsItems...
[neutrino] CScanSetup call addListFlagsItems...
[neutrino] CScanSetup call addScanMenuAutoScanAll...
[neutrino] CScanSetup call addListFlagsItems...
data[0] 0xe0, data[1] 0x1f
KEY: 160 - OK
pRead < 00340160
****           50 12 ****
data[0] 0xe0, data[1] 0x1f
KEY: 160 - OK
pRead < 00340160
****           50 12 ****
++++           54 ms ++++
data[0] 0xe0, data[1] 0xff
CVFD::ShowScrollText: [Manueller Frequenzscan]
KEY_RELEASE - 160 00 12 12 CAUSE=Timeout
----          155 ms ----
[SEM] DOWN
data[0] 0xe0, data[1] 0x1f
KEY: 160 - OK
pRead < 00350160
****          614 13 ****
[SEM] UP
KEY_PRESS - 160 13
++++            1 ms ++++
data[0] 0xe0, data[1] 0x1f
KEY: 160 - OK
pRead < 00350160
****           49 13 ****
data[0] 0xe0, data[1] 0x1f
KEY: 160 - OK
pRead < 00350160
****           49 13 ****
++++           52 ms ++++
data[0] 0xe0, data[1] 0xff
CVFD::ShowScrollText: [Kanalsuche starten]
KEY_RELEASE - 160 00 13 13 CAUSE=Timeout
----          152 ms ----
[SEM] DOWN
data[0] 0xe0, data[1] 0x1f
KEY: 160 - OK
pRead < 00360160
****         1680 14 ****
[SEM] UP
KEY_PRESS - 160 14
++++            0 ms ++++
[neutrino] CScanSetup::exec: smanual
[neutrino] CScanSetup::exec scan s in manual mode...
[neutrino] CScanSetup::exec manual...
[neutrino] CScanSetup call saveScanSetup...
[zapit] SetConfig...
[femanager.cpp:saveSettings:337] fe0
data[0] 0xe0, data[1] 0x1f
KEY: 160 - OK
pRead < 00360160
****           49 14 ****
[ConfigFile] saving /var/tuxbox/config/zapit/frontend.conf
data[0] 0xe0, data[1] 0x1f
KEY: 160 - OK
pRead < 00360160
****           54 14 ****
++++           47 ms ++++
data[0] 0xe0, data[1] 0xff
CScanTs::exec manual
StopAutoRecord: autoshift 0
[zapit.cpp:StopPlayBack:2262] standby 0 playing 0 forced 0
KEY_RELEASE - 160 00 14 14 CAUSE=Timeout
----          151 ms ----
[SEM] DOWN
16:51:24.726 Request of stop scanning (now scanning).
[zapit] adding to scan Astra 1KR/1L/1M/2C (19.2E) (position 192)
[femanager.cpp:getScanFrontend:772] Selected fe: 0
[LT:00000000:demux ] SetSource(0, 0) => 0 to 0
[zapit.cpp:StopPlayBack:2262] standby 0 playing 0 forced 0
[femanager.cpp:getScanFrontend:772] Selected fe: 0
[LT:00000000:demux ] SetSource(0, 0) => 0 to 0
[scan] scanning sat Astra 1KR/1L/1M/2C (19.2E) position 192
[scan] NIT no, fta only: no, satellites single
[scan] tp-id 31b100c000010001 freq 12721000 rate 22000000 fec 21 pol 0
[scan] add tp from settings: tp-id 31b100c000010001 freq 12721000 rate 22000000
fec 21 pol 0
[scan] scanning tp from sat/service
[scan] scanning: tp-id 31b100c000010001 freq 12721000 rate 22000000 fec 21 pol 0
[fe0] sat pos 0 -> 192 motor pos 0 -> 0 usals off
[fe0] tone off
[fe0] FE_SET_TONE took: 238 msec (min 210 max 244)
[fe0] tone on
[fe0] FE_SET_TONE took: 223 msec (min 210 max 244)
[fe0] tune to 12721000 DVB-S2 8PSK 3/4 H/L srate 22000000 (tuner 2121000 offset
10600000 timeout 4000)
[LT:00838760:demux ] Read read: Connection timed out fd:23, ev:0x0 DMX_PSI pid:0
x0014 flt:0x70
16:51:26.005 timeThread: getting DVB time done : -1 messaging_neutrino_sets_time
 1
16:51:26.006 timeThread: Time set FAILED (enabled: ntp 0 dvb 1)
[fe0] FE_HAS_SIGNAL
[fe0] ############################## poll timeout, time: 4880 msec (min 2000 max
 4916)
[scan] found 1 transponders (1 failed) and 0 channels
data[0] 0xe0, data[1] 0x1f
KEY: 160 - OK
pRead < 00370160
****        40862 15 ****
[SEM] UP
KEY_PRESS - 160 15
++++            0 ms ++++
16:52:05.358 Request of continue scanning (now idle).
changeDMX: for 0x4e not ignored! even though real_pauseCounter> 0 (1)
16:52:05.360 timeThread: getting DVB time (isOpen 1)
changeDMX: for 0x50 not ignored! even though real_pauseCounter> 0 (1)
changeDMX: for 0x60 not ignored! even though real_pauseCounter> 0 (1)
**************************** CChannelList::zapTo_ChannelID c784045f00353253
**************************** CChannelList::zapToChannel me 0x8502b8 Alle Kan├جle
 tuned 13929 new Hustler TV -> c784045f00353253
StopAutoRecord: autoshift 0
CChannelList::adjustToChannelID me 0x8502b8 [Alle Kan├جle] list size 14094 chann
el_id c784045f00353253
[zapit.cpp:ZapIt:527] [zapit] zap to Hustler TV (c784045f00353253 tp 31b100c0045
f0035)
[femanager.cpp:getFrontend:634] Check fe0: mode 1 locked 0 freq 12721000 TP 0 -
channel freq 12721 TP 31b100c0045f0035
[femanager.cpp:getFrontend:644] Selected fe: 0
[LT:00000000:demux ] SetSource(1, 0) => 0 to 0
[zapit.cpp:StopPlayBack:2262] standby 0 playing 0 forced 0
[LT:00000000:demux ] SetSource(0, 0) => 0 to 0
[fe0] sat pos 0 -> 192 motor pos 0 -> 0 usals off
[fe0] tone off
data[0] 0xe0, data[1] 0xff
CVFD::showServicename: Hustler TV
data[0] 0xe0, data[1] 0x1f
KEY: 160 - OK
pRead < 00380160
KEY_RELEASE - 160 00 15 15 CAUSE=Timeout
----          154 ms ----
[SEM] DOWN
****          158 16 ****
[SEM] UP
KEY_PRESS - 160 16
++++            0 ms ++++
data[0] 0xe0, data[1] 0xff
CVFD::ShowScrollText: [Kanalsuche starten]
[fe0] FE_SET_TONE took: 238 msec (min 210 max 244)
KEY_RELEASE - 160 00 16 16 CAUSE=Timeout
----          151 ms ----
[SEM] DOWN
[fe0] tone on
[neutrino] CScanSetup::exec: smanual
[neutrino] CScanSetup::exec scan s in manual mode...
[neutrino] CScanSetup::exec manual...
[neutrino] CScanSetup call saveScanSetup...
[zapit] SetConfig...
[femanager.cpp:saveSettings:337] fe0
[ConfigFile] saving /var/tuxbox/config/zapit/frontend.conf
CScanTs::exec manual
StopAutoRecord: autoshift 0
[fe0] FE_SET_TONE took: 227 msec (min 210 max 244)
[fe0] tune to 12721000 DVB-S2 8PSK 3/4 H/L srate 22000000 (tuner 2121000 offset
10600000 timeout 4000)
[fe0] FE_HAS_SIGNAL
[fe0] ############################## poll timeout, time: 4920 msec (min 2000 max
 4920)
[zapit.cpp:StopPlayBack:2262] standby 0 playing 0 forced 0
16:52:10.982 Request of stop scanning (now scanning).
[zapit] adding to scan Astra 1KR/1L/1M/2C (19.2E) (position 192)
[femanager.cpp:getScanFrontend:772] Selected fe: 0
[LT:00000000:demux ] SetSource(0, 0) => 0 to 0
[zapit.cpp:StopPlayBack:2262] standby 0 playing 0 forced 0
[femanager.cpp:getScanFrontend:772] Selected fe: 0
[LT:00000000:demux ] SetSource(0, 0) => 0 to 0
[scan] scanning sat Astra 1KR/1L/1M/2C (19.2E) position 192
[scan] NIT no, fta only: no, satellites single
[scan] tp-id 31b100c000010001 freq 12721000 rate 22000000 fec 21 pol 0
[scan] add tp from settings: tp-id 31b100c000010001 freq 12721000 rate 22000000
fec 21 pol 0
[scan] scanning tp from sat/service
[scan] scanning: tp-id 31b100c000010001 freq 12721000 rate 22000000 fec 21 pol 0
[fe0] sat pos 0 -> 192 motor pos 0 -> 0 usals off
[fe0] tone off
[fe0] FE_SET_TONE took: 239 msec (min 210 max 244)
[fe0] tone on
[fe0] FE_SET_TONE took: 230 msec (min 210 max 244)
[fe0] tune to 12721000 DVB-S2 8PSK 3/4 H/L srate 22000000 (tuner 2121000 offset
10600000 timeout 4000)
[fe0] FE_HAS_SIGNAL
[fe0] ############################## poll timeout, time: 4876 msec (min 2000 max
 4920)
[scan] found 1 transponders (1 failed) and 0 channels
[LT:00838760:demux ] Read read: Connection timed out fd:23, ev:0x0 DMX_PSI pid:0
x0014 flt:0x70
16:52:35.362 timeThread: getting DVB time done : -1 messaging_neutrino_sets_time
 1
16:52:35.363 timeThread: Time set FAILED (enabled: ntp 0 dvb 1)

----------- edit -------------
Zuletzt geändert von ghani123 am Do 2. Jan 2014, 18:40, insgesamt 3-mal geändert.
Bild
Benutzeravatar
jaro44
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 25
Registriert: Di 8. Okt 2013, 14:29
Wohnort: POLSKA
Hat sich bedankt: 0
Danksagung erhalten: 3 Mal

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#20

Beitrag von jaro44 »

ghani123 hat geschrieben:which are the transponders of HB at hotbird?
examples:
no signal: 10758V DVB-S2 8PSK 27500 3/4, 11258H DVB-S2 8PSK 27500 3/4, 11411H DVB-S2 8PSK 27500 5/6
signal ok: 11278V DVB-S2 8PSK 27500 3/4, 10971H DVB-S2 8PSK 29700 2/3
ghani123
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 264
Registriert: Do 19. Jan 2012, 01:01
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#21

Beitrag von ghani123 »

meine bootargs:

ich glaube nicht das ich da probleme habe mit bootargs, scheint ok oder?

Code: Alles auswählen

#Bootargs Morly's SH4 STB Admin Tool from: Do Jan 2 2014
baudrate=115200
preboot=if edb toenv ethaddr; then echo "Setup mac address."; else echo "Use default mac address.";  fi; bootmenu
menu_timeout=echo booting...;front_puts "booting";boot
menu_serialbreak=echo entering boot loader console.;front_puts "console"
menu_upgusb=setenv stdout vga;setenv stderr vga;if usbupg; then reset; else echo Oops...; echo You can debug through serial port.; fi
menu_upgusbhost=setenv stdout vga;setenv stderr vga;if usbupghost; then reset; else echo Oops...; echo You can debug through serial port.; fi
menu_upgserial=setenv stdout vga;setenv stderr vga;serial_upgrade;reset
menu_set2set=setenv stdout vga;setenv stderr vga;serial_set2set;reset
menu_hddfmt=setenv bootargs $bootargs format_hdd=1;front_puts "format hdd";boot
menu_debugmode=setenv bootargs $bootargs debug debug_app=1;front_puts "debug shell";boot
menu_upgnet=setenv bootargs "console=ttyAS1,115200 panic=3 root=/dev/mtdblock3 quiet" factory_update=1;front_puts "net upg";boot
menu_tvmode=set_tvmode;boot
serial#=cuberevo-mini2 debugging
board=cuberevo-mini2_27
monitor_base=0xA0000000
monitor_len=0x00040000
monitor_sec=1:0
load_addr=0x84000000
unprot=protect off $monitor_sec
update=erase $monitor_sec;cp.b $load_addr $monitor_base $monitor_len;protect on $monitor_sec
bootide=run bootargside;ide reset;ext2load ide 0:1 a5ff0000 boot/uImage;bootm a5ff0000
bootargside=setenv bootargs console=ttyAS1,115200 root=/dev/sda3 rw init=/bin/devinit ip=192.168.178.101:192.168.178.105:192.168.178.1:255.255.255.0:cuberevo:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:13:18:02:7A:BE
ipaddr=192.168.178.1
gateway=192.168.178.254
netmask=255.255.255.0
serverip=192.168.178.254
menu_1=setenv bootargs "console=ttyAS1,115200 root=/dev/mtdblock3 mem=128m ip=$ipaddr:$serverip:$gateway:$netmask:cuberevo:eth0:off coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=0 nwhwconf=device:eth0,hwaddr:$ethaddr";setenv bootcmd "bootm a0060000";saveenv;front_puts FLASH;boot
menu_2=setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 root=/dev/sda1 rw init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask:cuberevo:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:$ethaddr";setenv bootcmd "run bootusb";saveenv;front_puts SDA1-USB;boot
menu_3=setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:2 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 root=/dev/sda2 rw init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask:cuberevo:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:$ethaddr";setenv bootcmd "run bootusb";saveenv;front_puts SDA2-USB;boot
menu_4=setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:3 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 root=/dev/sda3 rw init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask:cuberevo:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:$ethaddr";setenv bootcmd "run bootusb";saveenv;front_puts SDA3-USB;boot
menu_5=setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:4 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 root=/dev/sda4 rw init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask:cuberevo:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:$ethaddr";setenv bootcmd "run bootusb";saveenv;front_puts SDA4-USB;boot
menu_6=setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:1 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 root=/dev/sdb1 rw init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask:cuberevo:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:$ethaddr";setenv bootcmd "run bootusb";saveenv;front_puts SDB1-USB;boot
menu_7=setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:2 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 root=/dev/sdb2 rw init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask:cuberevo:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:$ethaddr";setenv bootcmd "run bootusb";saveenv;front_puts SDB2-USB;boot
menu_8=setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:3 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 root=/dev/sdb3 rw init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask:cuberevo:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:$ethaddr";setenv bootcmd "run bootusb";saveenv;front_puts SDB3-USB;boot
menu_9=setenv bootusb "run bootargsusb;usb reset;ext2load usb 0:4 a5ff0000 boot/uImage;bootm a5ff0000";setenv bootargsusb "setenv bootargs console=ttyAS1,115200 root=/dev/sdb4 rw init=/bin/devinit ip=$ipaddr:$serverip:$gateway:$netmask:cuberevo:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:$ethaddr";setenv bootcmd "run bootusb";saveenv;front_puts SDB4-USB;boot
menu_0=setenv ipaddr 192.168.1.10;setenv serverip 192.168.1.9;setenv gateway 192.168.1.1;setenv netmask 255.255.255.0;setenv bootargs "console=ttyAS1,115200 root=/dev/nfs nfsroot=/mnt/nfs/enigma/ron rw rootpath=/mnt/nfs/enigma/ron ip=$ipaddr:$serverip:$gateway:$netmask:cuberevo:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 init=/bin/devinit nwhwconf=device:eth0,hwaddr:$ethaddr";setenv bootcmd "nfs a5ff0000 192.168.1.9:/mnt/nfs/enigma/ron/boot/uImage;bootm a5ff0000";saveenv;front_puts NFS;boot
bootusb=run bootargsusb;usb reset;ext2load usb 0:3 a5ff0000 boot/uImage;bootm a5ff0000
bootargsusb=setenv bootargs console=ttyAS1,115200 root=/dev/sda3 rw init=/bin/devinit ip=192.168.178.1:192.168.178.254:192.168.178.254:255.255.255.0:cuberevo:eth0:off mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=6 nwhwconf=device:eth0,hwaddr:00:13:18:00:00:3B
stdin=serial
stdout=serial
stderr=serial
ethaddr=00:13:18:00:00:3A
bootargs=console=ttyAS1,115200 root=/dev/mtdblock3 mem=128m ip=192.168.178.1:192.168.178.254:192.168.178.254:255.255.255.0:cuberevo:eth0:off coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=0 nwhwconf=device:eth0,hwaddr:00:13:18:00:00:3A
bootcmd=bootm a0060000
Bild
ghani123
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 264
Registriert: Do 19. Jan 2012, 01:01
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#22

Beitrag von ghani123 »

jaro44 hat geschrieben:
ghani123 hat geschrieben:which are the transponders of HB at hotbird?
examples:
no signal: 10758V DVB-S2 8PSK 27500 3/4, 11258H DVB-S2 8PSK 27500 3/4, 11411H DVB-S2 8PSK 27500 5/6
signal ok: 11278V DVB-S2 8PSK 27500 3/4, 10971H DVB-S2 8PSK 29700 2/3
Bestätigt, mit neutrino habe auch keine signal mit oben genannte transpondern!
mit enigma2 ist alles ok!!!
Bild
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 11773
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 362 Mal
Danksagung erhalten: 580 Mal
Kontaktdaten:

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#23

Beitrag von BPanther »

Hmm, sehr seltsam daß es nur den CX betrifft, dessen Austausch aber von E2 auch nicht hilft. Mal probiert statt 8PSK (was richtig ist) einfach QPSK zu benutzen? Irgendwas in der Art war damals auch bei Neutrino v1 mal. Den Rest mit den Logs schaue ich mir morgen früh nach der Nachtschicht mal in Ruhe an, muß nämlich jetzt erstmal los...
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x DM8000
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)),
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
ghani123
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 264
Registriert: Do 19. Jan 2012, 01:01
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#24

Beitrag von ghani123 »

BPanther hat geschrieben:Mal probiert statt 8PSK (was richtig ist) einfach QPSK zu benutzen?
ja, habe ich auch probiert

wegen putty, Welche Zeichensatz-Einstellung ist der richtige, denn meine habe ich auf iso-8859-6:1999 latin/arabic gefunden! und glaube nicht das es die richtige ist?
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Bild
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 11773
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 362 Mal
Danksagung erhalten: 580 Mal
Kontaktdaten:

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#25

Beitrag von BPanther »

Dann ändere das mal auf das hier:
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x DM8000
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)),
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
jaro44
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 25
Registriert: Di 8. Okt 2013, 14:29
Wohnort: POLSKA
Hat sich bedankt: 0
Danksagung erhalten: 3 Mal

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#26

Beitrag von jaro44 »

jaro44 hat geschrieben:
ghani123 hat geschrieben:which are the transponders of HB at hotbird?
no signal: 10758V DVB-S2 8PSK 27500 3/4, 11258H DVB-S2 8PSK 27500 3/4, 11411H DVB-S2 8PSK 27500 5/6
signal ok: 11278V DVB-S2 8PSK 27500 3/4, 10971H DVB-S2 8PSK 29700 2/3
no one knows why this is happening?
where to look for problem?
ghani123
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 264
Registriert: Do 19. Jan 2012, 01:01
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#27

Beitrag von ghani123 »

Hallo BPanther,

hast du was gefunden im log, ich warte immer noch auf dein rückmeldung?
Bild
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 11773
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 362 Mal
Danksagung erhalten: 580 Mal
Kontaktdaten:

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#28

Beitrag von BPanther »

Das Log zeigt nicht wirklich was auffälliges, aber ich habe da ne Idee, da mir das auf einmal bekannt vorkommt. Versuche mal die Datei aus dem Anhang. Nach /var/lib-misc kopieren und die Box neu starten.

EDIT: Anhang gelöscht.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x DM8000
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)),
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
ghani123
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 264
Registriert: Do 19. Jan 2012, 01:01
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#29

Beitrag von ghani123 »

Danke dir für den versuch, aber es ist das gleiche ergebnis, nichts hat sich geändert :(
Bild
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 11773
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 362 Mal
Danksagung erhalten: 580 Mal
Kontaktdaten:

Re: kein Empfang auf Transponder 12721H DVB-S2/8PSK 22000 3/

#30

Beitrag von BPanther »

Alles klaro, danke für den Test. War der gleiche Patch, den ich schon bei der UFS910 mal brauchte für einige Hotbird-Transponder und hätte ja sein können, daß es damit klappt.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x DM8000
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)),
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Antworten

Zurück zu „Vizyon810HD/820HD (Cuberevo Mini/Mini2/IpBox900/910) - USB“