Ich habe heute zum ersten mal versucht Neutrino auf meine UFS922 zu installieren (bin nach eurem HOWTO vorgegangen)
Benutzt habe ich [BP-NMP-BETA]_ufs922_BASE-rev6348_HAL-rev589-exp-next_NMP-rev7421-exp-next
Konnte mit dem Stick erfolgreich flashen, Neutrino startet und Sender sind da. Hurra
Aber: Ich kann nichts aufnehmen oder Timesift aktiveren.
Festplatte wird im Menu erkannt SDA1 500GB (ist die original Platte)
Ich kann diese Formatieren wie ich will, EX2 EX3 usw. Es kommt keine Fehlermeldung, dauert aber immer nur Sekunden
Ich habe unter \HDD keine möglichkeit Verzeichnise anzulegen oder anlegen zu lassen, auch nicht per FTP.
Ich bin leider kein Linux Befehl crack. Gibt es einen Befehl dies in Telnet zu machen und dann auch zu prüfen, das die Platte richtig formatiert (partitioniert) ist?
Die Suche hier im Forum und in der Wiki blieb erfolglos.
Ach ja Telnet zeigt:
Code: Alles auswählen
fs922:~# mount && blkid
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
/dev/mtdblock3 on /var type jffs2 (rw,noatime,nodiratime)
/dev/mtdblock3 on /etc type jffs2 (rw,noatime,nodiratime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /ram type tmpfs (rw,relatime)
/dev/root on /dev.static type squashfs (ro,relatime)
tmpfs on /dev type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw,relatime)
usbfs on /proc/bus/usb type usbfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,relatime)
nfsd on /proc/fs/nfsd type nfsd (rw,relatime)
/dev/mtdblock2: TYPE="squashfs"
/dev/ramzswap0: TYPE="swap"
cu Prodb