Sh4 Fortis family

sadaghiani
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 44
Registriert: Sa 8. Jun 2019, 12:47
Hat sich bedankt: 22 Mal
Danksagung erhalten: 5 Mal

Sh4 Fortis family

#1

Beitrag von sadaghiani »

Is It possible for the Fortis family to produce this image
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Sh4 Fortis family

#2

Beitrag von BPanther »

The AV700 Image is a HS9510 Image. But only testet at AV700.
The AV7000 Image is a Fortis HDBox (FS9000/FS9200) Image. But only testet at AV7000.
The AV7500 Image is a HS8200 Image. But only testet at AV7500.

I build only images for receiver which I have. So there are no other images.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
sadaghiani
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 44
Registriert: Sa 8. Jun 2019, 12:47
Hat sich bedankt: 22 Mal
Danksagung erhalten: 5 Mal

Re: Sh4 Fortis family

#3

Beitrag von sadaghiani »

ROOTFS_FILE = "root.img"
KERNEL_FILE = "uImage"
------------------------------
Two upper fills that can boot enigma from usb with factory bootloader 7.26 or 7.27 for Fortis family
Like this script
https://github.com/Audioniek/flash/blob ... 23G_USB.sh
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Sh4 Fortis family

#4

Beitrag von BPanther »

Your link is invalid (incomplete), but I found the script: https://github.com/Audioniek/flash/blob ... 23G_USB.sh
This script is for other fortis - they are not building by me.

Here you can see the "theoretically supported" fortis models at the git: https://github.com/Duckbox-Developers/b ... ake.sh#L30
But you must try building and testing by yourself. Because nobody has this models and so the git is not really updated for these models - maybe not working.
Folgende Benutzer bedankten sich beim Autor BPanther für den Beitrag:
sadaghiani (Di 6. Aug 2019, 22:22)
Bewertung: 7.69%
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
sadaghiani
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 44
Registriert: Sa 8. Jun 2019, 12:47
Hat sich bedankt: 22 Mal
Danksagung erhalten: 5 Mal

Re: Sh4 Fortis family

#5

Beitrag von sadaghiani »

----------------------------------------
Checking the .elf files in /home/amir/ddt/root/boot...
ERROR: One or more .elf files are missing in ./root/boot!
(audio_7100.elf is one of them)

Correct this and retry.
--------------------------------------
plz help
Benutzeravatar
DboxOldie
Co-Admin
Co-Admin
Beiträge: 5421
Registriert: Sa 6. Aug 2011, 15:21
Hat sich bedankt: 79 Mal
Danksagung erhalten: 295 Mal

Re: Sh4 Fortis family

#6

Beitrag von DboxOldie »

You have to put the firmware elf´s (dependend on SH4 CPU for your STB) into .../root/boot
For those the BS is searching for:

Code: Alles auswählen

audio_7100.elf audio_7105.elf audio_7111.elf video_7100.elf video_7105.elf video_7109.elf video_7111.elf
You find it on your STB in /lib/firmware or sometimes in /boot as named : video.elf, audio.elf

Put them in ../root/boot in the BS and rename them according to Your STB CPU as written above.
The others you don´t need, you may use a token ( create it with touch ).
Folgende Benutzer bedankten sich beim Autor DboxOldie für den Beitrag:
sadaghiani (Do 8. Aug 2019, 06:32)
Bewertung: 7.69%
MfG DboxOldie

KEIN SUPPORT PER PN > Bitte das Forum benutzen und ins Wiki schauen

Bild
sadaghiani
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 44
Registriert: Sa 8. Jun 2019, 12:47
Hat sich bedankt: 22 Mal
Danksagung erhalten: 5 Mal

Re: Sh4 Fortis family

#7

Beitrag von sadaghiani »

***********************************************
stlinux24-sh4-glibc-dev-2.14.1-59.sh4.rpm: cpio: premature end of file
make/crosstool-sh4.mk:55: recipe for target 'crosstool-rpminstall' failed
make: *** [crosstool-rpminstall] Error 2
***********************************************
plz guide me
***********************************************
also
Is there a way to convert the builed image (*.tar.gz) to these two files according to the script below?
-----------------------------------------------
ROOTFS_FILE = "root.img"
KERNEL_FILE = "uImage"
With a volume of 256MG
////////////////////////////////
https://github.com/Audioniek/flash/blob ... 23G_USB.sh
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Sh4 Fortis family

#8

Beitrag von BPanther »

sadaghiani hat geschrieben: Do 8. Aug 2019, 10:13 ***********************************************
stlinux24-sh4-glibc-dev-2.14.1-59.sh4.rpm: cpio: premature end of file
make/crosstool-sh4.mk:55: recipe for target 'crosstool-rpminstall' failed
make: *** [crosstool-rpminstall] Error 2
Maybe defect, so try deleting the file from Archive and try the download again.
sadaghiani hat geschrieben: Do 8. Aug 2019, 10:13 Is there a way to convert the builed image (*.tar.gz) to these two files according to the script below?
-----------------------------------------------
ROOTFS_FILE = "root.img"
KERNEL_FILE = "uImage"
With a volume of 256MG
////////////////////////////////
https://github.com/Audioniek/flash/blob ... 23G_USB.sh
The tar.gz is a normal USB file, but you must not use it. The "normal/unpacked" tree you can find at tufsbox/release, so you must change the script for the paths and some more, because there a unknown variables if you want to use it.
Folgende Benutzer bedankten sich beim Autor BPanther für den Beitrag:
sadaghiani (Fr 9. Aug 2019, 09:20)
Bewertung: 7.69%
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
sadaghiani
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 44
Registriert: Sa 8. Jun 2019, 12:47
Hat sich bedankt: 22 Mal
Danksagung erhalten: 5 Mal

Re: Sh4 Fortis family

#9

Beitrag von sadaghiani »

The path to this file should be changed below
------------------------------------------------
http://archive.stlinux.com/stlinux/2.4/ ... noarch.rpm
sadaghiani
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 44
Registriert: Sa 8. Jun 2019, 12:47
Hat sich bedankt: 22 Mal
Danksagung erhalten: 5 Mal

Re: Sh4 Fortis family

#10

Beitrag von sadaghiani »

configure: error: unsupported value hs7819 for --with-boxtype
make/neutrino.mk:380: recipe for target '/home/amir/buildsystem-ddt-master/.deps/neutrino-hd2.config.status' failed
make: *** [/home/amir/buildsystem-ddt-master/.deps/neutrino-hd2.config.status] Error 1
********************************************
plz help
------------------------------------
config :
//////////////////////
BOXARCH=sh4
BOXTYPE=hs7819
KERNEL_STM=p0217
OPTIMIZATIONS=normal
MEDIAFW=buildinplayer
IMAGE=neutrino-wlandriver
FLAVOUR=neutrino-hd2
EXTERNAL_LCD=none
//////////////////////
Benutzeravatar
DboxOldie
Co-Admin
Co-Admin
Beiträge: 5421
Registriert: Sa 6. Aug 2011, 15:21
Hat sich bedankt: 79 Mal
Danksagung erhalten: 295 Mal

Re: Sh4 Fortis family

#11

Beitrag von DboxOldie »

May be neutrino-hd2 don´t work with this model, I don´t know.

Code: Alles auswählen

FLAVOUR=neutrino-hd2
Try neutrino-mp
Folgende Benutzer bedankten sich beim Autor DboxOldie für den Beitrag:
sadaghiani (Fr 9. Aug 2019, 21:32)
Bewertung: 7.69%
MfG DboxOldie

KEIN SUPPORT PER PN > Bitte das Forum benutzen und ins Wiki schauen

Bild
sadaghiani
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 44
Registriert: Sa 8. Jun 2019, 12:47
Hat sich bedankt: 22 Mal
Danksagung erhalten: 5 Mal

Re: Sh4 Fortis family

#12

Beitrag von sadaghiani »

configure: error: unsupported value hs7819 for --with-boxtype
make/neutrino.mk:380: recipe for target '/home/amir/buildsystem-ddt-master/.deps/neutrino-hd2.config.status' failed
make: *** [/home/amir/buildsystem-ddt-master/.deps/neutrino-hd2.config.status] Error 1
*******************************************************************************************
BOXARCH=sh4
BOXTYPE=hs7819
KERNEL_STM=p0217
OPTIMIZATIONS=normal
MEDIAFW=buildinplayer
IMAGE=neutrino-wlandriver
FLAVOUR=neutrino-mp-tangos
EXTERNAL_LCD=none
sadaghiani
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 44
Registriert: Sa 8. Jun 2019, 12:47
Hat sich bedankt: 22 Mal
Danksagung erhalten: 5 Mal

Re: Sh4 Fortis family

#13

Beitrag von sadaghiani »

configure: error: unsupported value hs7819 for --with-boxtype
make/neutrino.mk:380: recipe for target '/home/amir/buildsystem-ddt-master/.deps/neutrino-hd2.config.status' failed
make: *** [/home/amir/buildsystem-ddt-master/.deps/neutrino-hd2.config.status] Error 1
**************************************************
BOXARCH=sh4
BOXTYPE=hs7819
KERNEL_STM=p0217
OPTIMIZATIONS=normal
MEDIAFW=buildinplayer
IMAGE=neutrino-wlandriver
FLAVOUR=neutrino-mp-ddt
EXTERNAL_LCD=none
Benutzeravatar
DboxOldie
Co-Admin
Co-Admin
Beiträge: 5421
Registriert: Sa 6. Aug 2011, 15:21
Hat sich bedankt: 79 Mal
Danksagung erhalten: 295 Mal

Re: Sh4 Fortis family

#14

Beitrag von DboxOldie »

Still wrong, line 380 is neutrino-hd2....
Try first:
make distclean
than once more:
./make.sh
for selecting all
and then build
Folgende Benutzer bedankten sich beim Autor DboxOldie für den Beitrag:
sadaghiani (Sa 10. Aug 2019, 08:45)
Bewertung: 7.69%
MfG DboxOldie

KEIN SUPPORT PER PN > Bitte das Forum benutzen und ins Wiki schauen

Bild
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Sh4 Fortis family

#15

Beitrag von BPanther »

sadaghiani hat geschrieben: Fr 9. Aug 2019, 18:30 The path to this file should be changed below
------------------------------------------------
http://archive.stlinux.com/stlinux/2.4/ ... noarch.rpm
Hmm, the ftp is correct at the GIT -> https://github.com/Duckbox-Developers/b ... -sh4.mk#L5

BTW: Try first a "simple build" without WLAN - but may still not works because I sayd before, nobody has really working at this receivers so many things may missing. But I'll try it by myself with:
make clean
./make.sh 15 2 1 1 1 1 1
make neutrino-mp

EDIT: Build is OK, no errors.

Code: Alles auswählen

***************************************************************

 Build of Neutrino for hs7819 successfully completed.

***************************************************************
Folgende Benutzer bedankten sich beim Autor BPanther für den Beitrag:
sadaghiani (Sa 10. Aug 2019, 08:48)
Bewertung: 7.69%
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Antworten

Zurück zu „Allgemeines/Anleitungen/FAQ“