[Frage] Solo4k und Neutrino Image

[Knicko]

Ah, okay, die Version der solo4k habe ich auch in Part 4.
Wo du grade sagst,

Code: Alles auswählen

Online- oder Offline-Update ist dann später problemlos möglich.

Hatte ich grade versucht, aus Part4 (bpanther) ein Wiesel Image in Part3 zu flashen, sah erst gut aus,

VU+ SOLO 4K - OK
CREATING BACKUP...
VU+ SOLO 4K - No Backup Partition, skipping...
BACKUP OK
FLASHING...

ofgwrite Utility v3.9.9 NMP-Edition
ofgwrite:
ofgwrite Utility v3.9.9 NMP-Edition

Found vuplus stb: solo4k
ofgwrite: Found vuplus stb: solo4k

Author: Betacentauri
ofgwrite: Author: Betacentauri

Based upon: mtd-utils-native-1.5.1 and busybox 1.24.1
ofgwrite: Based upon: mtd-utils-native-1.5.1 and busybox 1.24.1

Use at your own risk! Make always a backup before use!
ofgwrite: Use at your own risk! Make always a backup before use!

Don't use it if you use multiple ubi volumes in ubi layer!

ofgwrite: Don't use it if you use multiple ubi volumes in ubi layer!


Flashing multiboot partition 4
ofgwrite: Flashing multiboot partition 4

Flashing kernel
ofgwrite: Flashing kernel

Flashing rootfs
ofgwrite: Flashing rootfs

Searching image files in /tmp/ resolved to /tmp
ofgwrite: Searching image files in /tmp/ resolved to /tmp

Found kernel file: /tmp/kernel3_auto.bin
ofgwrite: Found kernel file: /tmp/kernel3_auto.bin

Found EXT4 rootfs
ofgwrite: Found EXT4 rootfs

Found mounted /newroot
ofgwrite: Found mounted /newroot

Found mounted /newroot
ofgwrite: Found mounted /newroot

Found mounted /newroot
ofgwrite: Found mounted /newroot


ofgwrite:

Determine current rootfs
ofgwrite: Determine current rootfs

Current rootfs is: /dev/mmcblk0p11
ofgwrite: Current rootfs is: /dev/mmcblk0p11

Execute: fdisk -l
ofgwrite: Execute: fdisk -l

Found valid GPT with protective MBR; using GPT

Using /dev/mmcblk0p10 as kernel device
ofgwrite: Using /dev/mmcblk0p10 as kernel device

Using /dev/mmcblk0p11 as rootfs device
ofgwrite: Using /dev/mmcblk0p11 as rootfs device


ofgwrite:

ofgwrite: Error: Cannot flash rootfs
VU+ SOLO 4K - OK
CREATING BACKUP...
VU+ SOLO 4K - No Backup Partition, skipping...
BACKUP OK
FLASHING...

ofgwrite Utility v3.9.9 NMP-Edition
ofgwrite:
ofgwrite Utility v3.9.9 NMP-Edition

Found vuplus stb: solo4k
ofgwrite: Found vuplus stb: solo4k

Author: Betacentauri
ofgwrite: Author: Betacentauri

Based upon: mtd-utils-native-1.5.1 and busybox 1.24.1
ofgwrite: Based upon: mtd-utils-native-1.5.1 and busybox 1.24.1

Use at your own risk! Make always a backup before use!
ofgwrite: Use at your own risk! Make always a backup before use!

Don't use it if you use multiple ubi volumes in ubi layer!

ofgwrite: Don't use it if you use multiple ubi volumes in ubi layer!


Flashing multiboot partition 4
ofgwrite: Flashing multiboot partition 4

Flashing kernel
ofgwrite: Flashing kernel

Flashing rootfs
ofgwrite: Flashing rootfs

Searching image files in /tmp/ resolved to /tmp
ofgwrite: Searching image files in /tmp/ resolved to /tmp

Found kernel file: /tmp/kernel3_auto.bin
ofgwrite: Found kernel file: /tmp/kernel3_auto.bin

Found EXT4 rootfs
ofgwrite: Found EXT4 rootfs

Found mounted /newroot
ofgwrite: Found mounted /newroot

Found mounted /newroot
ofgwrite: Found mounted /newroot

Found mounted /newroot
ofgwrite: Found mounted /newroot


ofgwrite:

Determine current rootfs
ofgwrite: Determine current rootfs

Current rootfs is: /dev/mmcblk0p11
ofgwrite: Current rootfs is: /dev/mmcblk0p11

Execute: fdisk -l
ofgwrite: Execute: fdisk -l

Found valid GPT with protective MBR; using GPT

Using /dev/mmcblk0p10 as kernel device
ofgwrite: Using /dev/mmcblk0p10 as kernel device

Using /dev/mmcblk0p11 as rootfs device
ofgwrite: Using /dev/mmcblk0p11 as rootfs device


ofgwrite:

ofgwrite: Error: Cannot flash rootfs
Error: Cannot flash rootfs, because no rootfs file was found
ofgwrite: , because no rootfs file was found
ofgwrite: , because no rootfs file was found

fand ja anscheinend zuerst das rootfs und brach dann das flashen ab, wo er es dann nicht mehr gefunden hat.

Code: Alles auswählen

ofgwrite: Error: Cannot flash rootfs
Error: Cannot flash rootfs, because no rootfs file was found
ofgwrite: , because no rootfs file was found

Oder geht das flashen nur in diegleiche partition?
gr. Knicko

[thomas]

Updates gehen grundsätzlich nur in die eigene Partition, daher heißt das auch Updates. Will man in eine andere Partition flashen, dann via USB oder auch per Telnet flashen mit:
ofgwrite -mX /tmp
wobei X die Nummer der Partition ist und /tmp das Verzeichnis wo die Dateien zum flashen liegen. Gibt man noch -r an, wird nur das root gesucht und geflasht, denn das Kernel sollte ja eh schon da sein vom ersten Umstellen auf Multiboot.

[Aliraza63]

Updates gehen grundsätzlich nur in die eigene Partition, daher heißt das auch Updates. Will man in eine andere Partition flashen, dann via USB oder auch per Telnet flashen mit:
ofgwrite -mX /tmp
wobei X die Nummer der Partition ist und /tmp das Verzeichnis wo die Dateien zum flashen liegen. Gibt man noch -r an, wird nur das root gesucht und geflasht, denn das Kernel sollte ja eh schon da sein vom ersten Umstellen auf Multiboot.

First of All I am really thankful for your great work here are some questions in my mind I want to ask may be their answers can be helpful for others to
I want to know . After remapping the flash . Which image must be in first boot ? because you selected open Atv but some Black hole or VTI have different structure.

[Aliraza63]

Thanks.

There is no direction. You can flash whatever you want at each partition. If first neutrino, OK - if E2 also OK. There is no "emergency" boot partition how hd51. If a partition not booting anymore, you will have to flash this partition again via usb or you can, if available, using a serial connection (RJ12<->RS232 adapter) for manual switching. All images have the same file for flashing, the rootfs.tar.bz2. You must only rename this one to the right partition number you wish to flash e.g. rootfs2.tar.bz2 for partition 2. The kernel is for all 4 images the same from neutrino (do not use the E2 kernel) and so I have put all 4 kernel at the packed image. For changing the partitions at E2 don't forget the stb startup plugin for E2 from the multiboot thread, because E2 does not know the multiboot.

[EnoSat]

HI,
any idea for fix this crash boot ?
boot:

Code: Alles auswählen

CPU 01
BCM73660020
PRID73760020
v9.99
RR:00000003
BFW
seclib-1.5
BBL v1.0.1
AVS init...
spare0/rmon_hz=017d736f
spare1/rmon_vt=017d736f
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00
AVS load_code offset =00051000
LOADED
I2C @ f040a280.
BID: no ack!

single board
MEMSYS-STD
SHMOO 01010107 BLD:9286 HW:hpf0_b1p4 V:1.1.1.7
MCB: FLEX
AVS start:status=000000ff
STB: Current voltage=00000371(881)
 temperature=0000c1fc(49660)
 PV=0000034f(847)
 MV=00000371(881)
AVS FW rev=30333078 [0.3.0.x]
OK
DDR0: !@ ffe0e780 <= ffe0dfc4 MEMSYS-0 @ f0500000 OK
DDR1: =@ ffe0e780 <= ffe0dfc4 MEMSYS-1 @ f0900000 OK
Sdram Scramble OTP = 0x00000001 
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b05252b
BFW load mode OTP = 0x0000000f 
bfw_hash_locked = 0x00000000 
BFW key3 OK, BFW load OK
BFW v2.1.0
COPY CODE... DONE
MICH: disable success
SSBL
PINMUX
CACHE FLUSH OK
MMU ON
CACHE FLUSH OK
_fbss  07077170
_ebss  0708ebd8
_end   0708ebf8
HEAP @ 07100000
STACK @ 09200000
ARCH: CONFIG OK
CLR BSS 07077170 to 0708ebd8 OK
CLR SRAM  OK
MARK XN: 07100000 to 09200000 size 02100000 OK
CACHE FLUSH OK
CPU CLKSET OK
GO!

    ,/    
  ,'/___, BOLT v9.99 1b4a6a4 LOCAL BUILD
.'__  ,'  (2015-09-02 15:24:48 vuplus-team@vuplus-team-Notebook)
   /,'    Copyright (C) 2015 Broadcom Corporation
  /'      

Board: BCM97366SFF_bad_MoCA
SYS_CTRL: product=7376, family=7366c0, strap=000001ad, 
otp @ 0xf0404030 = 0x826000e0: en_cr(0x00000060) en_testport(0x00000080) hdmi_rx_disable(0x00400000) macrovision_disable(0x02000000) moca_disable(0x80000000) rv9_disable(0x00200000) 
otp @ 0xf0404034 = 0x60081821: audio_0_disable(0x00000800) audio_1_disable(0x00001000) directv_disable(0x20000000) hdmi_tx1_disable(0x00000001) moca2_disable(0x40000000) rfm_disable(0x00000020) tfec_disable(0x00080000) 
otp @ 0xf0404520 = 0x00000000: 
CPU: 2x A15, 1503 MHz
SCB: 324 MHz
DDR0 @ 1067MHz, DDR1 @ 1067MHz
RESET CAUSE: 0x000003 main_chip_input power_on (2 of 22 possible causes)
CS0: SFDP SPI, 4MB, 64kB blocks, 256B pages
CS1: NAND: unrecognized ID: 0x1ffffff 0xffffffff
RTS0: 0x501004, 256 clients, ok
RTS1: 0x901004, 256 clients, ok
rts 03 [20141112213819_4ku0t_box3]*default
BOX MODE: 3
LCD_Init Complete
AVS: park check
AVS: temperature monitoring enabled
AVS: STB: V=0.877V, T=+50.634C, PV=0.847V, MV=0.881V, FW=30333078 [0.3.0.x]
USB @ 0xf0480200: IPP is active high, IOC is negative polarity
USB @ 0xf0490200: IPP is active high, IOC is negative polarity
SPLASH: starting
SPLASH BMEM init @ 40000000
SPLASH BMEM init @ c0000000

usb: resetting device on bus 1 hub 1 port 1


USB: New high speed device connected to bus 1 hub 1 port 1

usb: found Human-Interface Device 1004:6300

usb: resetting device on bus 4 hub 1 port 1


USB: New high speed device connected to bus 4 hub 1 port 1

usb: no driver found for 148f:5372
SPLASH: Old format file in flash. Use splash_create_flash_file to create newer format.
Loaded BMP: W=720 H=480
SPLASH: audio not present
boot device name [flash0.bolt]
waiting for usb...done
checking usb
No Priority Usb
checking front key
readFrontKey 0 0
Check ignore.update file
Checking usbdisk0:/vuplus/solo4k/ignore.update......NO
Check force.update file
Checking usbdisk0:/vuplus/solo4k/force.update......NO
bolt update ...Checking usbdisk0:/vuplus/solo4k/bolt_auto.bin......NO
Checking usbdisk0:/vuplus/solo4k/rootfs.tar.bz2......NO
....NO
Checking usbdisk0:/vuplus/solo4k/splash_auto.bin......NO
Checking usbdisk0:/vuplus/solo4k/kernel_auto.bin......NO
Board ID is zero! - You need to hardware fix (ECO) it!
Executing STARTUP...
Loader:raw Filesys:fat Dev:(null) File:emmcflash0.startup:STARTUP Options:(null)
Loading: 

CPU exception: ABT
 r0     : 00000000
 r1     : 00000000
 r2     : 00000000
 r3     : 00000000
 r4     : 00000000
 r5     : 00000000
 r6     : ffffffff
 r7     : 0776c40c
 r8     : 0776c860
 r9     : 00000000
r10     : 0708b2c4
r11     : dffffffb
r12     : 00000000
r13 (sp): 091ff950
r14 (lr): 07016810
r15 (pc): 07016808
cpsr    : 600001d3
dfsr    : 00000007
dfar    : 00000000
ifar    : 00000000

CTRL-C

Code: Alles auswählen

CPU 01
BCM73660020
PRID73760020
v9.99
RR:00000003
BFW
seclib-1.5
BBL v1.0.1
AVS init...
spare0/rmon_hz=017d736f
spare1/rmon_vt=017d736f
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00
AVS load_code offset =00051000
LOADED
I2C @ f040a280.
BID: no ack!

single board
MEMSYS-STD
SHMOO 01010107 BLD:9286 HW:hpf0_b1p4 V:1.1.1.7
MCB: FLEX
AVS start:status=000000ff
STB: Current voltage=00000371(881)
 temperature=0000bc47(48199)
 PV=00000350(848)
 MV=00000371(881)
AVS FW rev=30333078 [0.3.0.x]
OK
DDR0: !@ ffe0e780 <= ffe0dfc4 MEMSYS-0 @ f0500000 OK
DDR1: =@ ffe0e780 <= ffe0dfc4 MEMSYS-1 @ f0900000 OK
Sdram Scramble OTP = 0x00000001 
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b05252b
BFW load mode OTP = 0x0000000f 
bfw_hash_locked = 0x00000000 
BFW key3 OK, BFW load OK
BFW v2.1.0
COPY CODE... DONE
MICH: disable success
SSBL
PINMUX
CACHE FLUSH OK
MMU ON
CACHE FLUSH OK
_fbss  07077170
_ebss  0708ebd8
_end   0708ebf8
HEAP @ 07100000
STACK @ 09200000
ARCH: CONFIG OK
CLR BSS 07077170 to 0708ebd8 OK
CLR SRAM  OK
MARK XN: 07100000 to 09200000 size 02100000 OK
CACHE FLUSH OK
CPU CLKSET OK
GO!

    ,/    
  ,'/___, BOLT v9.99 1b4a6a4 LOCAL BUILD
.'__  ,'  (2015-09-02 15:24:48 vuplus-team@vuplus-team-Notebook)
   /,'    Copyright (C) 2015 Broadcom Corporation
  /'      

Board: BCM97366SFF_bad_MoCA
SYS_CTRL: product=7376, family=7366c0, strap=000001ad, 
otp @ 0xf0404030 = 0x826000e0: en_cr(0x00000060) en_testport(0x00000080) hdmi_rx_disable(0x00400000) macrovision_disable(0x02000000) moca_disable(0x80000000) rv9_disable(0x00200000) 
otp @ 0xf0404034 = 0x60081821: audio_0_disable(0x00000800) audio_1_disable(0x00001000) directv_disable(0x20000000) hdmi_tx1_disable(0x00000001) moca2_disable(0x40000000) rfm_disable(0x00000020) tfec_disable(0x00080000) 
otp @ 0xf0404520 = 0x00000000: 
CPU: 2x A15, 1503 MHz
SCB: 324 MHz
DDR0 @ 1067MHz, DDR1 @ 1067MHz
RESET CAUSE: 0x000003 main_chip_input power_on (2 of 22 possible causes)
******************************************
Automatic startup canceled via Ctrl-C
******************************************

CS0: SFDP SPI, 4MB, 64kB blocks, 256B pages
CS1: NAND: unrecognized ID: 0xffffff 0xffffffff
RTS0: 0x501004, 256 clients, ok
RTS1: 0x901004, 256 clients, ok
rts 03 [20141112213819_4ku0t_box3]*default
BOX MODE: 3
LCD_Init Complete
AVS: park check
AVS: temperature monitoring enabled
AVS: STB: V=0.879V, T=+49.173C, PV=0.848V, MV=0.881V, FW=30333078 [0.3.0.x]
USB @ 0xf0480200: IPP is active high, IOC is negative polarity
USB @ 0xf0490200: IPP is active high, IOC is negative polarity
SPLASH: starting
SPLASH BMEM init @ 40000000
SPLASH BMEM init @ c0000000

usb: resetting device on bus 1 hub 1 port 1


USB: New high speed device connected to bus 1 hub 1 port 1

usb: found Human-Interface Device 1004:6300

usb: resetting device on bus 4 hub 1 port 1


USB: New high speed device connected to bus 4 hub 1 port 1

usb: no driver found for 148f:5372
SPLASH: Old format file in flash. Use splash_create_flash_file to create newer format.
Loaded BMP: W=720 H=480
SPLASH: audio not present
boot device name [flash0.bolt]
waiting for usb...done
checking usb
No Priority Usb
checking front key
readFrontKey 0 0
Check ignore.update file
Checking usbdisk0:/vuplus/solo4k/ignore.update......NO
Check force.update file
Checking usbdisk0:/vuplus/solo4k/force.update......NO
bolt update ...Checking usbdisk0:/vuplus/solo4k/bolt_auto.bin......NO
Checking usbdisk0:/vuplus/solo4k/rootfs.tar.bz2......NO
....NO
Checking usbdisk0:/vuplus/solo4k/splash_auto.bin......NO
Checking usbdisk0:/vuplus/solo4k/kernel_auto.bin......NO
Board ID is zero! - You need to hardware fix (ECO) it!
BOLT> printenv
Variable Name        Value
-------------------- --------------------------------------------------
        BOOT_CONSOLE uart0
              SPLASH ENABLE
             STARTUP batch -fatfs emmcflash0.startup:STARTUP
            ETH0_PHY INT
      ETH0_MDIO_MODE 1
          ETH0_SPEED 1000
        ETH0_PHYADDR 1
         ETH0_HWADDR 00:1D:EC:0A:50:05
             VERSION 9.99
      CHIP_FAMILY_ID 73660020
           BOARDNAME BCM97366SFF_bad_MoCA
          MEMORYSIZE 2048
          DT_ADDRESS 761c000
             DT_SIZE a2c7
*** command status = 0
BOLT>

[BPanther]

Maybe STARTUP is corrupt.

Code: Alles auswählen

Executing STARTUP...
Loader:raw Filesys:fat Dev:(null) File:emmcflash0.startup:STARTUP Options:(null)
Loading:

The bootargs are missing.

Just try a start with the console. You have used CTRL-C, so you need only input the boot line for a partition you want to start - see: VU+ 4K MultiBoot

Code: Alles auswählen

boot emmcflash0.kernel_1 'root=/dev/mmcblk0p5 rw rootwait rootflags=data=journal debug coherent_pool=2M brcm_cma=504M@0x10000000 brcm_cma=260M@0x2f800000 brcm_cma=1024M@0x80000000'
boot emmcflash0.kernel_2 'root=/dev/mmcblk0p7 rw rootwait rootflags=data=journal debug coherent_pool=2M brcm_cma=504M@0x10000000 brcm_cma=260M@0x2f800000 brcm_cma=1024M@0x80000000'
boot emmcflash0.kernel_3 'root=/dev/mmcblk0p9 rw rootwait rootflags=data=journal debug coherent_pool=2M brcm_cma=504M@0x10000000 brcm_cma=260M@0x2f800000 brcm_cma=1024M@0x80000000'
boot emmcflash0.kernel_4 'root=/dev/mmcblk0p11 rw rootwait rootflags=data=journal debug coherent_pool=2M brcm_cma=504M@0x10000000 brcm_cma=260M@0x2f800000 brcm_cma=1024M@0x80000000'

I have attached the STARTUP files for /boot, but you must check if /boot mountet at MENU->Information->Box Info or serial/Telnet. If the partition not mountet, then you have a problem, maybe the partition is corrupt.