A request from the esteemed developers regarding Dreambox 800se

[zozman]

Flash and USB images rebuild and uploaded, kernel fits now in original partition size.

[ali ganm]

Thank you, my dear teacher. Now the image works well, with a simple note. The blue lamp is constantly flashing on the face of the receiver. Is this normal?

[atef 0]

Thank you, my dear teacher. Now the image works well, with a simple note. The blue lamp is constantly flashing on the face of the receiver. Is this normal?

Good, finally.
The led should be flashing at booting, if neutrino runs then the led stays blue. Please try the following in telnet:

This should flashing the led (used at booting):

Code: Alles auswählen

echo A7FCCF7A > /proc/stb/fp/led0_pattern
echo 00000020 > /proc/stb/fp/led_pattern_speed

led no flashing (used if neutrino itself starting):

Code: Alles auswählen

echo FFFFFFFF > /proc/stb/fp/led0_pattern

led flashing again (used if reboot/shutdown/error):

Code: Alles auswählen

echo A7FCCF7A > /proc/stb/fp/led0_pattern

If this works, I will change this at the next version.

BTW: Strange is, that rootfs has only max. ~43 MB (so now only ~11 MB free), should be ~60 MB. But maybe too many flash blocks corrupt after the years.

[ali ganm]

This matter has been messed up

echo FFFFFFFF > /proc/stb/fp/led0_pattern

[zozman]

You mean that

echo FFFFFFFF > /proc/stb/fp/led0_pattern

still flashing? Strange.

Then try

echo FFFFFFFF > /proc/stb/fp/led0_pattern
echo 00000000 > /proc/stb/fp/led_pattern_speed

[ali ganm]

You mean that

echo FFFFFFFF > /proc/stb/fp/led0_pattern

still flashing? Strange.

Then try

echo FFFFFFFF > /proc/stb/fp/led0_pattern
echo 00000000 > /proc/stb/fp/led_pattern_speed

yes

[zozman]

echo FFFFFFFF > /proc/stb/fp/led0_pattern
echo 00000000 > /proc/stb/fp/led_pattern_speed

does also net help?

Then I need the output from:

grep -r "" /proc/stb/fp


EDIT: I must now go to work...

[atef 0]

You mean that

echo FFFFFFFF > /proc/stb/fp/led0_pattern

still flashing? Strange.

Then try

echo FFFFFFFF > /proc/stb/fp/led0_pattern
echo 00000000 > /proc/stb/fp/led_pattern_speed

He means the blue light is fixed after executing this command. This command solves the problem.

[ali ganm]

Help yourself

[BPanther-Mobil]

He means the blue light is fixed after executing this command. This command solves the problem.

Ahhh, thank you very much. Then is all ok.

[atef 0]

Rebuild the images for dm800se and dm800sev2 with the led fix. Hope it works now correct.

BTW: Moved to new DM 800 SE forum.

[ali ganm]

Now the imag works perfectly. Thanks for the effort, our respected professor. I am a fan of Neutrino