BPanther's Neutrino Forum

Board: STb7100-Mboard (MB411) [29-bit mode]


U-Boot 1.3.1 (Oct 21 2009 - 15:59:46) - stm23-2008-06-03

DRAM: 64 MB
NOR: 16 MB
In: serial
Out: serial
Err: serial
Serial 3 Intialized
VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD using PIC
Test Class : GetInstance()
Test Class : GetInstance()
RawBuffer.cpp at RawBuffer ,29
FD = 0
SWRecoveryHandler.cpp at Recover ,46
No Recovery Needed
End of testCpp
Hit any key to stop autoboot: 0
Original bootargs = console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.178.122:192.168.178.4:192.168.178.1:255.255.255.0:kathrein:eth0:off mem=122m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000
ethaddr = 00:D0:55:04:8C:B7

new Params = console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.178.122:192.168.178.4:192.168.178.1:255.255.255.0:kathrein:eth0:off mem=122m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000 stmmaceth=ethaddr:00:D0:55:04:8C:B7

## Booting image at a0040000 ...
Image Name: Linux-2.6.32.71_stm24_0217
Created: 2018-02-13 15:20:29 UTC
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1702286 Bytes = 1.6 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.178.122:192.168.178.4:192.168.178.1:255.255.255.0:kathrein:eth0:off mem=122m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000 stmmaceth=ethaddr:00:D0:55:04:8C:B7
- 0x00000000 - 0 ...

INIT: version 2.88 booting
INIT: Entering runlevel: 3

kathrein login: BPanther-Image rev16443-ddt
[mountvirtfs] Mount /dev in tmpfs
[mountvirtfs] Copying device nodes to /dev
/etc/mdev/mdev-mount.sh: line 90: logger: not found
/etc/mdev/mdev-mount.sh: line 98: logger: not found
[mountall] Mounting local filesystems...
Cleaning /tmp.
Hostname: ufs922.
Starting portmap daemon....
Setup DHCP for Network-Interface eth0
fp_control: SW Version 1.04
Model: ufs922
vBoxType: 3
Selected Model: Kathrein UFS922 frontpanel control utility
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M:%S
, WAKEUPDECREMENT 300
udhcpc: started, v1.29.0.git
3
setBrightness: : Invalid argument
udhcpc: sending discover
udhcpc: sending select for 192.168.178.22
udhcpc: lease of 192.168.178.22 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 192.168.178.1
fp_control: SW Version 1.04
Model: ufs922
vBoxType: 3
Selected Model: Kathrein UFS922 frontpanel control utility
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M:%S
, WAKEUPDECREMENT 300
4096+0 records in
4096+0 records out
4194304 bytes (4.0MB) copied, 0.066111 seconds, 60.5MB/s
copLoadFile (file /lib/firmware/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
4096+0 records in
4096+0 records out
4194304 bytes (4.0MB) copied, 0.068162 seconds, 58.7MB/s
copLoadFile (file /lib/firmware/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
showSinglePic /var/boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
swapoff: /dev/ramzswap0: No such device or address
rmmod: can't unload module 'ramzswap': No such file or directory
Model: 'ufs922'
vBoxType: 3
Input device name: "TDT RC event driver"
Selected Remote: Kathrein UFS922 RemoteControl
RemoteControl Map:
MEDIA - D5 - 226
ARCHIVE - 46 - 361
MENU - 54 - 139
RED - 6D - 398
GREEN - 6E - 399
YELLOW - 6F - 400
BLUE - 70 - 401
EXIT - 55 - 102
TEXT - 3C - 388
EPG - CC - 365
REWIND - 21 - 168
FASTFORWARD - 20 - 208
PLAY - 38 - 207
PAUSE - 39 - 119
RECORD - 37 - 167
STOP - 31 - 128
STANDBY - 0C - 116
MUTE - 0D - 113
CHANNELUP - 1E - 104
CHANNELDOWN - 1F - 109
VOLUMEUP - 10 - 115
VOLUMEDOWN - 11 - 114
INFO - 0F - 358
OK - 5C - 352
UP - 58 - 103
RIGHT - 5B - 106
DOWN - 59 - 108
LEFT - 5A - 105
0BUTTON - 00 - 11
1BUTTON - 01 - 2
2BUTTON - 02 - 3
3BUTTON - 03 - 4
4BUTTON - 04 - 5
5BUTTON - 05 - 6
6BUTTON - 06 - 7
7BUTTON - 07 - 8
8BUTTON - 08 - 9
9BUTTON - 09 - 10
Frontpanel Map:
FP_MENU - 80 - 139
FP_EXIT - 0D - 102
FP_OK - 04 - 352
FP_WHEEL_LEFT - 0F - 103
FP_WHEEL_RIGHT - 0E - 108
Supports Long KeyPress: 1
processComplex >
toggle 0, disable 0
period 120, delay 10
Using period=120 delay=10
[SEM] DOWN
[ca_ci] -> GetInstance
[ca_ci] -> cCA 2
>>> Neutrino (compiled Feb 13 2018 16:59:46) <<<
[neutrino] frameBuffer Instance created
libstb-hal debug options can be set by exporting HAL_DEBUG.
The following values (or bitwise OR combinations) are valid:
component: audio 0x01
component: video 0x02
component: demux 0x04
component: play 0x08
component: power 0x10
component: init 0x20
component: ca 0x40
component: record 0x80
all components: 0xff
[LT:00000000:init ] init_td_api begin, initialized=0, debug=0x00
[LT:00000000:init ] init_td_api end
12288k video mem
CFrameBuffer::setMode avail: 12582912 active: 1
FB: 1280x720x32 line length 5120.
[neutrino] executing /var/tuxbox/config/neutrino.start.
/var/tuxbox/config/neutrino.start failed: No such file or directory
[neutrino] Software update enabled
[neutrino] set debuglevel: 0
[LT:00000000:init ] init_td_api begin, initialized=1, debug=0x00
[LT:00000000:init ] init_td_api end
[neutrino] recording dir: /media/sda1/movie
[neutrino] timeshift dir: /media/sda1/movie/.timeshift
[timerd] wakeup from standby: no
[neutrino.cpp] executing /var/tuxbox/config/deepstandby.off.
[neutrino CEC Settings] setCECSettings init CEC settings...
[neutrino] [CNeutrinoFonts] [SetupNeutrinoFonts - 154] font file: /share/fonts/neutrino.ttf
[neutrino] [CNeutrinoFonts] [SetupNeutrinoFonts - 176] standard font family: Arial Narrow
[neutrino] [CNeutrinoFonts] [SetupDynamicFonts - 136] dynamic font family: Arial Narrow
CVFD::setlcdparameter dimm 5 power 1
CVFD::showServicename:
CVFD::ShowScrollText: [Tuxbox-Neutrino 3.7.1 wird gestartet ...]
[fe0/0] frontend fd 10 type 0
[frontend.cpp:getFEInfo:344] ioctl(fd, FE_GET_PROPERTY, &cmdseq): Operation not permitted
WARNING: can't query delivery systems on frontend 0/0 - falling back to legacy mode
[femanager.cpp:Init:104] add fe 0
[fe0/1] frontend fd 9 type 0
[frontend.cpp:getFEInfo:344] ioctl(fd, FE_GET_PROPERTY, &cmdseq): Operation not permitted
WARNING: can't query delivery systems on frontend 0/1 - falling back to legacy mode
[femanager.cpp:Init:104] add fe 1
[frontend.cpp:Open:278] /dev/dvb/adapter0/frontend2: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter0/frontend3: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter1/frontend0: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter1/frontend1: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter1/frontend2: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter1/frontend3: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter2/frontend0: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter2/frontend1: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter2/frontend2: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter2/frontend3: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter3/frontend0: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter3/frontend1: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter3/frontend2: No such file or directory
[frontend.cpp:Open:278] /dev/dvb/adapter3/frontend3: No such file or directory
[femanager.cpp:Init:120] found 2 frontends, 4 demuxes

[zapit] Loading services, channel size 244 ..
[getservices.cpp:LoadServices:942] Loading satellites...
[getservices.cpp:FindTransponder:601] going to parse dvb-s provider Astra 1KR/1L/1M/1N (19.2E)
[zapit] 1360 services loaded (1360)...
[zapit] service loading took: 585 msec
[getservices.cpp:FindTransponder:601] going to parse dvb-s provider Astra 1KR/1L/1M/1N (19.2E)
[zapit.cpp:PrepareChannels:1076] LoadServices: success
[bouquets.cpp:parseBouquetsXml:400] reading bouquets from /var/tuxbox/config/zapit/bouquets.xml
[bouquets.cpp:parseBouquetsXml:493] total: 53 bouquets
[bouquets.cpp:loadWebchannels:830] Loading webtv from /var/tuxbox/config/webtv_usr.xml ...
[bouquets.cpp:loadWebchannels:830] Loading webradio from /var/tuxbox/config/webradio_usr.xml ...
[bouquets.cpp:parseBouquetsXml:400] reading bouquets from /var/tuxbox/config/zapit/ubouquets.xml
[bouquets.cpp:parseBouquetsXml:493] total: 71 bouquets
############## CBouquetManager::makeRemainingChannelsBouquet: numbers start at: tv 1 radio 1 ############
[zapit] bouquet loading took: 1198 msec
CServiceManager::SaveServices: total channels: 1371
CServiceManager::SaveServices: processed channels: 1360
[zapit.cpp:Start:2545] channels have been loaded succesfully
[zapit.cpp] diseqc type = 0
[femanager.cpp:loadSettings:248] load config for fe0
[femanager.cpp:loadSettings:248] load config for fe1
[femanager.cpp:linkFrontends:425] linking..
[femanager.cpp:linkFrontends:452] Frontend #1: link to master 0 as LOOP
[femanager.cpp:linkFrontends:467] Frontend #0: is master, with loop: yes, with rotor: no
[frontend.cpp:setDiseqcType:1499] fe0: NO_DISEQC
[femanager.cpp:linkFrontends:469] Frontend #1: is LOOP, master 0
[frontend.cpp:setDiseqcType:1499] fe1: NO_DISEQC
[femanager.cpp:linkFrontends:493] pip demux: 3
/var/tuxbox/config/zapit/audio.conf: No such file or directory
/var/tuxbox/config/zapit/volume.conf: No such file or directory
[ca_ci] -> SetInitMask param:3
[ca_ci] -> SetTSClock to: high
[ca_ci] -> Start
[zapit] GetConfig...
[zapit] starting... tid 878
[neutrino VideoSettings] setupVideoSystem setup videosystem...
[fb]::getFileHandle: WARNING, this should never be used, please report!
>>>>>[src/gui/osd_helpers.cpp - setVideoSystem:218] before SetVideoSystem:
var.xres : 1280, var.yres : 720, var.yres_virtual: 720
fix.line_length : 5120, fix.smem_len: 12582912 Byte
[LT:00825f38:video ] SetVideoSystem: old: '720p50' new: 'pal'
[LT:00000000:video ] hdmi_out(0)
[zapit] sdt monitor started
[LT:00000000:video ] hdmi_out(1)
>>>>>[src/gui/osd_helpers.cpp - setVideoSystem:231] after SetVideoSystem:
var.xres : 720, var.yres : 576, var.yres_virtual: 576
fix.line_length : 2880, fix.smem_len: 12582912 Byte
[neutrino VideoSettings] setVideoSettings init video settings...
[rcinput:checkdev] /dev/input mtime changed
[rcinput:open] open /dev/input/mouse3 failed: No such device
[rcinput:open] open /dev/input/mouse2 failed: No such device
[rcinput:open] open /dev/input/mouse1 failed: No such device
[rcinput:open] open /dev/input/mouse0 failed: No such device
[rcinput:open] open /dev/input/mice failed: No such device
[rcinput:open] open /dev/input/js3 failed: No such device
[rcinput:open] open /dev/input/js2 failed: No such device
[rcinput:open] open /dev/input/js1 failed: No such device
[rcinput:open] open /dev/input/js0 failed: No such device
[rcinput:open] open /dev/input/event3 failed: No such device
[rcinput:open] open /dev/input/event2 failed: No such device
[rcinput:open] open /dev/input/event1 failed: No such device
[rcinput:open] opened /dev/input/event0 (fd 23) ev 0x100003
[zapit.cpp:leaveStandby:2380] standby 1 recording 0
[zapit.cpp:ZapIt:524] [zapit] zap to rbb Berlin (bdf4043100016e2e tp 2f4d00c004310001)
[zapit] GetConfig...
[LT:00000000:demux ] SetSource(1, 0) => 0 to 0
[zapit.cpp:StopPlayBack:2304] standby 0 playing 0 forced 0 send_pmt 1
[LT:00000000:demux ] SetSource(0, 0) => 0 to 0
[fe0/0] tune to 12109000 DVB QPSK 3/4 H/L srate 27500000 pli 0 plc 1 plm 0 (tuner 1509000 offset 10600000 timeout 4000)
[fe0/0] ############################## poll timeout, time: 4008 msec (min 2000 max 4008)
[zapit] ZapIt:1 SCR retry tuning 1 after 661ms
[basicsocket] receive timed out.
[CBasicClient] receive failed: /tmp/zapit.sock
[neutrino] g_info.has_fan: 1
FAN Speed 1
CStreamManager::Listen: on 31339, fd 22
[yhttpd] Webserver nhttpd/3.4.1 (yhttpd_core/1.3.2) tid 884
[LT:00920958:demux ] Stop #0: not open!
timerd startup, tid 880
09:07:43.571 [sectionsd] start
Starting STREAM thread keeper, tid 885
[sectionsd] Caching: 3 days, 3 hours Extended Text, max 20000 events, Events are old 3 hours after end time
[sectionsd] NTP: disabled, command /usr/sbin/ntpd -n -q -p time.fu-berlin.de
09:07:43.608 [sectionsd] starting
SIevent size: 88
====> USING SLOW ADDEVENT. export 'NO_SLOW_ADDEVENT=1' to avoid <===
09:07:43.661 timeThread::run:: starting, pid 863 (868742264)
[LT:0089ce00:demux ] _open: setting /dev/dvb/adapter0/demux0 to source 0
09:07:43.677 timeThread: get DVB time ch 0x000000000000 (isOpen 1)
09:07:43.681 eitThread::run:: starting, pid 863 (877130872)
09:07:43.694 cnThread::run:: starting, pid 863 (885519480)
09:07:43.700 freeSatThread::run:: starting, pid 863 (895480952)
[yhttpd] Webserver starting...
[neutrino] menue setup
[neutrino] init menus...
[neutrino] mediaplayer menu instance created
[ca_ci] -> GetNumberCISlots
[network config] Instance created
[neutrino] [CNetworkSetup] [getInstance - 90], Instance created
[neutrino] ScanSetup Instance created
[LT:0087eba8:play ] cPlayback
[mb]->refreshBrowserList
[mb]->refreshFilterList 20
[neutrino CMoviePlayerGui] Instance created...
[neutrino] registering as event client
[neutrino] had to wait 0 ms for timerd start...
[neutrino] Creating channels lists...
[neutrino] got 1197 TV and 173 RADIO channels
[neutrino] all channels took: 3 msec
[neutrino] created Astra 1KR/1L/1M/1N (19.2E) (192) bouquet with 1197 TV and 162 RADIO channels
[neutrino] sat took: 17 msec
[neutrino] got 1 removed TV channels
[neutrino] sats took: 75 msec
[neutrino] got 53 TV and 26 RADIO bouquets
[neutrino] took: 84 msec
CNeutrinoApp::SetChannelMode 0 [tv]
[neutrino.cpp:SetChannelMode:2068] newmode 0 sort old -1 new 0
[neutrino.cpp:tvMode:4494] rezap 1 current mode 1
CVFD::showServicename:
CRemoteControl::tvMode
CNeutrinoApp::SetChannelMode 0 [tv]
[neutrino.cpp:SetChannelMode:2068] newmode 0 sort old -1 new 0
**************************** CChannelList::zapTo_ChannelID bdf4043100016e2e
**************************** CChannelList::zapToChannel me 0x9aa810 Alle Kanäle tuned 268435455 new rbb Berlin -> bdf4043100016e2e
09:07:44.928 [sectionsd] commandserviceStopped
09:07:44.928 cnThread: stop eit update filter (not active)
09:07:44.929 [sectionsd] commandserviceStopped done
stopPlayBack: stopping...
stopPlayBack: stopped
CChannelList::adjustToChannelID me 0x9aa810 [Alle Kanäle] list size 1197 channel_id bdf4043100016e2e
09:07:44.952 [sectionsd] commandserviceChanged: Service change to bdf4043100016e2e demux #0
changeDMX: for 0x4e not ignored! even though real_pauseCounter> 0 (1)
changeDMX: for 0x50 not ignored! even though real_pauseCounter> 0 (1)
changeDMX: for 0x60 not ignored! even though real_pauseCounter> 0 (1)
sh: you need to specify whom to kill
CHDDDestExec: checking /sys/block/sda
[ca_ci] -> Ready param:1
################################## after all ##################################: 69860 msec
[neutrino] initialized everything
[CPlugins] could not find startup
[LT:0089ce00:demux ] Read:1 ========== fd has changed, 33->-1 ==========
09:07:46.684 timeThread: get DVB time ch 0x043100016e2e rc: -1 neutrino_sets_time 0
09:07:46.685 timeThread: Time set FAILED (enabled: ntp 0 dvb 1)
09:07:47.692 timeThread: get DVB time ch 0x043100016e2e (isOpen 1)
[

Connection #0 to host api.coolithek.slknet.de left intact


[curl:download] O.K. size: 16066 bytes, time: 0.41 sec.
output: return string
url: https://api.coolithek.slknet.de/api.html

[CLuaInstance::runScript] error in script: ...uxbox/plugins//neutrino-mediathek/
mediathek_leftMenu.lua:25: attempt to index field '?' (a nil value)