USB-Image

quetschwalze
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 4
Registriert: So 31. Jul 2011, 16:52
Hat sich bedankt: 0
Danksagung erhalten: 0

USB-Image

#1

Beitrag von quetschwalze »

Hallo BPanther,

vielen Dank erstmal das Du die UFS 912 hier mit aufgenommen hast.
Nachdem ja Multiboot anscheinend funktioniert (werde es erst morgen ausprobieren können), wäre es Klasse wenn es jetzt noch ein Image von Dir hier geben würde.

Gruß

Quetschwalze
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13409
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: USB-Image

#2

Beitrag von BPanther »

Wird es sicherlich bald geben, auch wenn ich das Image im Grunde dann sozusagen "blind" bauen muß, da ich es selbst nicht testen kann. Die rcS muß auch noch entsprechend angepasst werden, damit auch die meisten Funktionen wie bei den anderen Boxen dann auch hier zur Verfügung stehen.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
quetschwalze
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 4
Registriert: So 31. Jul 2011, 16:52
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: USB-Image

#3

Beitrag von quetschwalze »

Na ich bin dabei wenn es ums testen geht.
Linux Erfahrungen sind da :)

Gruß
FredWst
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 7
Registriert: So 14. Aug 2011, 12:02
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: USB-Image

#4

Beitrag von FredWst »

Hello,

I hope answer will be in english :)

I've tested :

In flash AAF Team e2.
last script Daduck version 0.5.

BPantherImage[BA-USB]-rev2580 don't work :(

AAF_M7127_g1990_ufs912_update_neutrino_p123_P179_UPDATEUSB_nodebug work

Regards

Ps if somebody can give me scart pin for rs232 i can take a look in debug mode.
Benutzeravatar
Gismotro
Moderator
Moderator
Beiträge: 1179
Registriert: So 7. Aug 2011, 22:20
Hat sich bedankt: 3 Mal
Danksagung erhalten: 11 Mal

Re: USB-Image

#5

Beitrag von Gismotro »

Please tell us on with Hardware you ar testing. I thing it could be the UFS 912. Im right ?

Will the stabil Version work on your maschine ? (BPantherImage[BA-USB]-rev2381.tar.gz)
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13409
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: USB-Image

#6

Beitrag von BPanther »

Small correction: for ufs912 currently no "stable image" available, only a test - but seems to be not working. Here we must see via rs232 whats the problem is. I think the rcS is not right...
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
FredWst
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 7
Registriert: So 14. Aug 2011, 12:02
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: USB-Image

#7

Beitrag von FredWst »

BPanther hat geschrieben:Small correction: for ufs912 currently no "stable image" available, only a test - but seems to be not working. Here we must see via rs232 whats the problem is. I think the rcS is not right...
re,

Yes i'm trying on ufs 912

I can make logs, but i need pin connection for rs232, somebody can give me ?

Regards
Fred
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13409
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: USB-Image

#8

Beitrag von BPanther »

Should be this one - found via Google...
Bild
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
FredWst
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 7
Registriert: So 14. Aug 2011, 12:02
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: USB-Image

#9

Beitrag von FredWst »

BPanther hat geschrieben:Should be this one - found via Google...
Bild
I've found but

http://www.esc-kathrein.de/shop/catalog ... cts_id=139

Does not seems to be for ufs912.

Regards

Fred
j00zek
Developer
Developer
Beiträge: 89
Registriert: Do 21. Jul 2011, 22:51
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: USB-Image

#10

Beitrag von j00zek »

FredWst hat geschrieben:
BPanther hat geschrieben:Small correction: for ufs912 currently no "stable image" available, only a test - but seems to be not working. Here we must see via rs232 whats the problem is. I think the rcS is not right...
re,

Yes i'm trying on ufs 912

I can make logs, but i need pin connection for rs232, somebody can give me ?

Regards
Fred
You don't need rs-232 connection to make logs. ;)
And rcS in this version requires a lot of changes in it to start working. without them you will observe massive restarts.

j00zek
FredWst
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 7
Registriert: So 14. Aug 2011, 12:02
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: USB-Image

#11

Beitrag von FredWst »

Hello,

Why did you said that ?
Debug in console is the best public way to find trouble.

Regards
Fred
j00zek
Developer
Developer
Beiträge: 89
Registriert: Do 21. Jul 2011, 22:51
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: USB-Image

#12

Beitrag von j00zek »

FredWst hat geschrieben:Hello,

Why did you said that ?
Debug in console is the best public way to find trouble.

Regards
Fred
Well.....
The point is that you can have the almost same information logged in the file. And this is the simplest public way - not console as no need for special rs cable to do that ;)

Just edit /etc/inittab file and add " >/var/rcS.log 2>&1" to the rcS starting line and you will have exactly the same things logged as in console.

Cheers,
j00zek
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13409
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: USB-Image

#13

Beitrag von BPanther »

j00zek hat geschrieben:Just edit /etc/inittab file and add " >/var/rcS.log 2>&1" to the rcS starting line and you will have exactly the same things logged as in console.
That's also a way, thanks, but i've redirected to /tmp to protect /var. ;)

si::sysinit:/etc/init.d/rcS >/tmp/rcS.log 2>&1
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
FredWst
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 7
Registriert: So 14. Aug 2011, 12:02
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: USB-Image

#14

Beitrag von FredWst »

Re

I'll try that tomorrow.

Thank's

Regards
Fred
j00zek
Developer
Developer
Beiträge: 89
Registriert: Do 21. Jul 2011, 22:51
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: USB-Image

#15

Beitrag von j00zek »

BPanther hat geschrieben:
j00zek hat geschrieben:Just edit /etc/inittab file and add " >/var/rcS.log 2>&1" to the rcS starting line and you will have exactly the same things logged as in console.
That's also a way, thanks, but i've redirected to /tmp to protect /var. ;)

si::sysinit:/etc/init.d/rcS >/tmp/rcS.log 2>&1
Probably you will not see log file on /tmp. That's because during start of the rcS script it isn't mounted yet (rcS mounts it) . To my knowledge there must be existing folder in the folder structure.
Antworten

Zurück zu „UFS912 - USB“