Icecrypt S4000 HD

Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Icecrypt S4000 HD

#31

Beitrag von BPanther »

As I say'd you can use the BAE (Bootargs Editor) (start with av7000.cmd), or manually with fw_printenv (shows the bootargs) and fw_setenv <what you need to change/add/del>.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Icecrypt S4000 HD

#32

Beitrag von BPanther »

Strange that you need an slow usb pen for the tuner. Do you start with an uncrypted channel?
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
DboxOldie
Co-Admin
Co-Admin
Beiträge: 5421
Registriert: Sa 6. Aug 2011, 15:21
Hat sich bedankt: 79 Mal
Danksagung erhalten: 295 Mal

Re: Icecrypt S4000 HD

#33

Beitrag von DboxOldie »

Well then try in extras to aktivate the param boot delay.
It is especially for slow usb devices, but may be it helps.
The stb waits the choosen seconds in rcS.
But loading tuner driver and other modules will act afterwards, of couse with the same Speed.
MfG DboxOldie

KEIN SUPPORT PER PN > Bitte das Forum benutzen und ins Wiki schauen

Bild
Benutzeravatar
DboxOldie
Co-Admin
Co-Admin
Beiträge: 5421
Registriert: Sa 6. Aug 2011, 15:21
Hat sich bedankt: 79 Mal
Danksagung erhalten: 295 Mal

Re: Icecrypt S4000 HD

#34

Beitrag von DboxOldie »

Yes you are right....but this "boot delay" is a delay in rcS for waiting if the usb device fs is ready.
It´s just a try.. :wink:
MfG DboxOldie

KEIN SUPPORT PER PN > Bitte das Forum benutzen und ins Wiki schauen

Bild
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Icecrypt S4000 HD

#35

Beitrag von BPanther »

Sure is a dns server config possible. Just set the variable, the command line has the variable and should use this. A cat /proc/cmdline in telnet shows the start bootargs and should have ip adresses and no variables (bootloader changes the variables to real values if exist).
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Icecrypt S4000 HD

#36

Beitrag von BPanther »

You have used my bootargs - and so you can see the names of the variables. ipaddr, serverip and gatewayip. dns itself not really needed, gatewayip is used internal - neutrino itself is using the dns from the own network options. But if you set the right network options at neutrino, this settings will be used and must working if right. The bootargs ips are used for the first boot.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Icecrypt S4000 HD

#37

Beitrag von BPanther »

mackowiakp hat geschrieben:Not everything is translated, but major menus - yes. So in spare time I will translate more and send You ready file.
Ok, thanks. ;)
mackowiakp hat geschrieben:So still we have a problem with rcS (probably rcS).
The rcS can not be a problem, because a compare with the other image it was the same. You can set a bootdelay in extras menu -> extended, but I think this should not be the "fix resolution" for the tuner problem.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Icecrypt S4000 HD

#38

Beitrag von BPanther »

"shutdown -h now" does not read any timer and does not unmount all file system - data may corrupt or lost at var e.g. timer etc.

Please make a full serial log with booting from "slow usb" and the "too fast flash" without press any keys (except the bootmenu to switch the boot device). But both images must excactly have the same configuration so we can compare the start.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Icecrypt S4000 HD

#39

Beitrag von BPanther »

Is this a old language file from the DBox2? Very strange entrys and masses of "superfluous entry" and missing entrys...

The cmdline from the bootargs are not complete, a ip is missing (serverip). MAC is not really valid and from UFS910, but should works if only once in your network.
Hostname was changed. I hope not on first boot, because then the devices (/dev) are not complete or invalid.
Who is try to killing rdate and why? rdate is no background program (no daemon).

The shutdown seems to be OK without any problems (timers reading, set time at frontpanel and box off).
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Icecrypt S4000 HD

#40

Beitrag von BPanther »

No problem with the logs, I have also tomorrow free. ;)
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Icecrypt S4000 HD

#41

Beitrag von BPanther »

Hmm, no start problems, the start seems to be the same as the usb image, but...
The tuning problem is clear, it's not really the same config and not the same channellist.

Flash:

Code: Alles auswählen

[zapit.cpp:ZapIt:527] [zapit] zap to TVN 24 (b28603e8013e10d8 tp 2c81008203e8013e)
[femanager.cpp:getFrontend:634] Check fe0: mode 1 locked 0 freq 0 TP 0 - channel freq 11393 TP 2c81008203e8013e
[femanager.cpp:getFrontend:634] Check fe1: mode 1 locked 0 freq 0 TP 0 - channel freq 11393 TP 2c81008203e8013e
[femanager.cpp:getFrontend:644] Selected fe: 0
[LT:00000000:demux ] SetSource(1, 0) => 0 to 0
[zapit.cpp:StopPlayBack:2267] standby 0 playing 0 forced 0
[LT:00000000:demux ] SetSource(0, 0) => 0 to 0
[fe0] sat pos 0 -> 130 motor pos 0 -> 0 usals off
[fe0] tune to 11393000 DVB QPSK 5/6 V/R srate 27500000 (tuner 1643000 offset 9750000 timeout 5000)
[fe0] ############################## poll timeout, time: 5005 msec (min 2000 max 5005)
[zapit] ZapIt:1 SCR retry tuning 3 after 90ms
[fe0] sat pos 0 -> 130 motor pos 0 -> 0 usals off
[fe0] tune to 11393000 DVB QPSK 5/6 V/R srate 27500000 (tuner 1643000 offset 9750000 timeout 5000)
[fe0] ############################## poll timeout, time: 5007 msec (min 2000 max 5007)
[zapit] ZapIt:1 SCR retry tuning 2 after 29ms
[fe0] sat pos 0 -> 130 motor pos 0 -> 0 usals off
[fe0] tune to 11393000 DVB QPSK 5/6 V/R srate 27500000 (tuner 1643000 offset 9750000 timeout 5000)
[fe0] ############################## poll timeout, time: 5007 msec (min 2000 max 5007)
[zapit] ZapIt:1 SCR retry tuning 1 after 341ms
[fe0] sat pos 0 -> 130 motor pos 0 -> 0 usals off
[fe0] tune to 11393000 DVB QPSK 5/6 V/R srate 27500000 (tuner 1643000 offset 9750000 timeout 5000)
[fe0] ############################## poll timeout, time: 5007 msec (min 2000 max 5007)
USB:

Code: Alles auswählen

[zapit.cpp:ZapIt:527] [zapit] zap to TVN 24 (b28603e8013e10d8 tp 2c81008203e8013e)
[femanager.cpp:getFrontend:634] Check fe0: mode 1 locked 0 freq 0 TP 0 - channel freq 11393 TP 2c81008203e8013e
[femanager.cpp:getFrontend:634] Check fe1: mode 1 locked 0 freq 0 TP 0 - channel freq 11393 TP 2c81008203e8013e
[femanager.cpp:getFrontend:644] Selected fe: 0
[LT:00000000:demux ] SetSource(1, 0) => 0 to 0
[zapit.cpp:StopPlayBack:2267] standby 0 playing 0 forced 0
[LT:00000000:demux ] SetSource(0, 0) => 0 to 0
[fe0] sat pos 0 -> 130 motor pos 0 -> 0 usals off
[fe0] tune to 11393000 DVB QPSK 4/5 V/R srate 27500000 (tuner 1643000 offset 9750000 timeout 4000)
[frontend.cpp:getEvent:499] [fe0] ******** FE_HAS_LOCK: freq 1643000
[fe0] tuning took: 161 msec (min 161 max 161)
Do you see the problem? It's right, that you have problems with flash, but it's your fault...
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Icecrypt S4000 HD

#42

Beitrag von BPanther »

Yes, if you have a look at the transponder datas you will see, they are different and so can not work both too.

Flash:

Code: Alles auswählen

[fe0] tune to 11393000 DVB QPSK 5/6 V/R srate 27500000 (tuner 1643000 offset 9750000 timeout 5000)
USB:

Code: Alles auswählen

[fe0] tune to 11393000 DVB QPSK 4/5 V/R srate 27500000 (tuner 1643000 offset 9750000 timeout 4000)
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Icecrypt S4000 HD

#43

Beitrag von BPanther »

Above I wrote that the transponder datas are wrong on the flash image. You can scan the TP also manually with right data or just use the channel list of the usb image.

If you can not change the epg path (or some other paths) then you have try'd a not supported or blocked file system (e.g. squash or jffs2). Your mount seems to be wrong or not working and /var/epg ist still jffs2 in flash.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Icecrypt S4000 HD

#44

Beitrag von BPanther »

You can not compare with usb image, because there is all writeable and (in most cases) enough space. Just check the mounts in telnet.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13405
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: Icecrypt S4000 HD

#45

Beitrag von BPanther »

It's the same function called for all path changes. I think there is no mount, but if you change it manually in the neutrino.conf then you will it see if var "explode" if the mount wrong and not enough space in var for the epg data.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Antworten

Zurück zu „AV7000 / Octagon 1018 - FLASH“