NMP UFS922 14.03.2014 fehlerhaft

Ghostbob
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 16
Registriert: Fr 7. Jun 2013, 21:20
Hat sich bedankt: 0
Danksagung erhalten: 1 Mal

NMP UFS922 14.03.2014 fehlerhaft

#1

Beitrag von Ghostbob »

Kurze Info:

Zuerst über den Online Update und danach auch per USB update der gleiche Fehler:

Zapit -Initialisation error. Die Box bleibt beim Starten von Neutrino stehen

Habe wieder per USB auf der 03.03.2014 Version zurückgeflasht. Alles funktioniert wieder.


Gruß

Ghostbob
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13409
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: NMP UFS922 14.03.2014 fehlerhaft

#2

Beitrag von BPanther »

Durch die Backup-Wiederherstellung ist Dein Post von vorhin leider verlorengangen, indem Du auch die gleichen Probleme mit der aktuellen rev6069 beschrieben hattest. Sorry...

Die UFS922 habe ich selbst leider nicht, nur der Zapit-Fehler ist recht seltsam, denn alle anderen Boxen zeigen diesen nicht. Mach doch mal bitte ein serielles Log.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Ghostbob
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 16
Registriert: Fr 7. Jun 2013, 21:20
Hat sich bedankt: 0
Danksagung erhalten: 1 Mal

Re: NMP UFS922 14.03.2014 fehlerhaft

#3

Beitrag von Ghostbob »

Code: Alles auswählen

1Board: STb7100-Mboard (MB411)  [29-bit mode]


U-Boot 1.3.1 (Oct 21 2009 - 15:59:46) - stm23-2008-06-03

DRAM:  64 MB
NOR:   16 MB
In:    serial
Out:   serial
Err:   serial
Serial 3 Intialized
VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD using PIC
Test Class : GetInstance()
Test Class : GetInstance()
RawBuffer.cpp at RawBuffer ,29
FD = 0
SWRecoveryHandler.cpp at Recover ,46
No Recovery Needed
End of testCpp
Hit any key to stop autoboot:  0 
Original bootargs = console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.1.100:192.168.1.1:192.168.1.1:255.255.255.0:kathrein:eth0:off mem=122m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000 
ethaddr = 00:D0:55:04:E1:E5

new Params = console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.1.100:192.168.1.1:192.168.1.1:255.255.255.0:kathrein:eth0:off mem=122m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000 stmmaceth=ethaddr:00:D0:55:04:E1:E5

## Booting image at a0040000 ...
   Image Name:   Linux-2.6.32.61_stm24_0212
   Created:      2014-03-21  12:35:16 UTC
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    1702633 Bytes =  1.6 MB
   Load Address: 84001000
   Entry Point:  84002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.1.100:192.168.1.1:192.168.1.1:255.255.255.0:kathrein:eth0:off mem=122m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000 stmmaceth=ethaddr:00:D0:55:04:E1:E5
 - 0x00000000 - 0 ...

INIT: version 2.86 booting
mount: /etc/mtab: Read-only file system
INIT: Entering runlevel: 3

kathrein login: BPanther-Image BASE-rev6069_HAL-rev584-exp-next_NMP-rev7019-exp-next
touch: /dev/.devfsd: Read-only file system
Mount /dev in tmpfs
Copying device nodes to /dev
Mounting local filesystems...
Cleaning /tmp.
Hostname: ufs922.
Starting FTP server: vsftpd.
fp_control: SW Version 1.04
Model: ufs922
vBoxType: 3
Selected Model: Kathrein UFS922 frontpanel control utility
init
checkConfig
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM =     %H:%M:%S    
, WAKEUPDECREMENT  300
Setup DHCP for Network-Interface eth0
3
setbrightness: : Invalid argument
udhcpc (v1.22.1) started
Sending discover...
fp_control: SW Version 1.04
Model: ufs922
vBoxType: 3
Selected Model: Kathrein UFS922 frontpanel control utility
init
checkConfig
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM =     %H:%M:%S    
, WAKEUPDECREMENT  300
4096+0 records in
4096+0 records out
4194304 bytes (4.0MB) copied, 0.067103 seconds, 59.6MB/s
copLoadFile (file /lib/firmware/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
4096+0 records in
4096+0 records out
4194304 bytes (4.0MB) copied, 0.066967 seconds, 59.7MB/s
copLoadFile (file /lib/firmware/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
Sending select for 192.168.1.178...
Lease of 192.168.1.178 obtained, lease time 3600
route: SIOCDELRT: No such process
adding dns 192.168.1.1
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
insmod: can't insert '/lib/modules/avl2108.ko': invalid module format
insmod: can't insert '/lib/modules/stmdvb.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/player2.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/sth264pp.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/stmalloc.ko': unknown symbol in module, or unknown parameter
Starting portmap daemon....
showSinglePic /var/boot/bootlogo.mvi
VIDEO_SET_FORMAT failed (Bad file descriptor)
sh: write error: Input/output error
Model: ufs922
vBoxType: 3
Input device name: "TDT RC event driver"
Selected Remote: Kathrein UFS922 RemoteControl
RemoteControl Map:
               MEDIA - D5 - 226
             ARCHIVE - 46 - 361
                MENU - 54 - 139
                 RED - 6D - 398
               GREEN - 6E - 399
              YELLOW - 6F - 400
                BLUE - 70 - 401
                EXIT - 55 - 102
                TEXT - 3C - 388
                 EPG - CC - 365
              REWIND - 21 - 168
         FASTFORWARD - 20 - 208
                PLAY - 38 - 207
               PAUSE - 39 - 119
              RECORD - 37 - 167
                STOP - 31 - 128
             STANDBY - 0C - 116
                MUTE - 0D - 113
           CHANNELUP - 1E - 104
         CHANNELDOWN - 1F - 109
            VOLUMEUP - 10 - 115
          VOLUMEDOWN - 11 - 114
                INFO - 0F - 138
                  OK - 5C - 352
                  UP - 58 - 103
               RIGHT - 5B - 106
                DOWN - 59 - 108
                LEFT - 5A - 105
             0BUTTON - 00 -  11
             1BUTTON - 01 -   2
             2BUTTON - 02 -   3
             3BUTTON - 03 -   4
             4BUTTON - 04 -   5
             5BUTTON - 05 -   6
             6BUTTON - 06 -   7
             7BUTTON - 07 -   8
             8BUTTON - 08 -   9
             9BUTTON - 09 -  10
Frontpanel Map:
             FP_MENU - 80 - 139
             FP_EXIT - 0D - 102
               FP_OK - 04 - 352
       FP_WHEEL_LEFT - 0F - 103
      FP_WHEEL_RIGHT - 0E - 108
Supports Long KeyPress: 1
processComplex >
toggle 0, disable 0
period 120, delay 10
Using period=120 delay=10
[SEM] DOWN
killall: showiframe: no process killed
[ca_ci.cpp] GetInstance
[ca_ci.cpp] cCA 2
failed to open /dev/dvb/adapter0/ci0 ->No such deviceIOCTL CA_RESET failed for slot 7918624
failed to open /dev/dvb/adapter0/ci1 ->No such deviceIOCTL CA_RESET failed for slot 7920288
>>> Neutrino (compiled Mar 21 2014 13:47:46) <<<
[neutrino] frameBuffer Instance created
libstb-hal debug options can be set by exporting HAL_DEBUG.
The following values (or bitwise OR combinations) are valid:
    component: audio   0x01
    component: video   0x02
    component: demux   0x04
    component: play    0x08
    component: power   0x10
    component: init    0x20
    component: ca      0x40
    component: record  0x80
    all components:    0xff
[LT:00000000:init  ] init_td_api begin, initialized=0, debug=0x00
[LT:00000000:init  ] init_td_api: ERROR open /dev/dvb/adapter0/demux0 (No such device)
[LT:00000000:init  ] init_td_api end
12288k video mem
CFrameBuffer::setMode avail: 12582912 active: 1
FB: 1280x720x32 line length 5120. Not using nevis GXA accelerator.
[neutrino] Software update enabled
[neutrino] set debuglevel: 0
[neutrino start] 2080  ->     1 ms
[LT:00000000:init  ] init_td_api begin, initialized=1, debug=0x00
[LT:00000000:init  ] init_td_api end
[neutrino start] 2085  ->     2 ms
[english.locale] missing entry: audioplayer.screensaver_dir
[english.locale] missing entry: menu.hint_audioplayer_screensaver_dir
[english.locale] missing entry: menu.hint_channellist_hdicon
[english.locale] missing entry: menu.hint_infobar_dotmatrix
[english.locale] missing entry: menu.hint_shairport
[english.locale] missing entry: miscsettings.infobar_dotmatrix_display
[english.locale] missing entry: parentallock.zaptime
[neutrino] config file /var/tuxbox/config/neutrino.conf is broken, using defaults
***************************** rec dir /hdd/movie timeshift dir /hdd/timeshift
[neutrino start] 2094  ->  1025 ms
[neutrino.cpp] executing /var/tuxbox/config/deepstandby.off.
[neutrino CEC Settings] setCECSettings init CEC settings...
cannot read locale: No such file or directory
[neutrino start] 2111  ->  1118 ms
[neutrino] settings font file /usr/share/fonts/neutrino.ttf
[neutrino] font family Arial Narrow
[neutrino] font family Arial Narrow
[neutrino start] 2115  ->  1196 ms
[neutrino start] 2117  ->  1196 ms
[neutrino start] 2123  ->  1349 ms
CVFD::setlcdparameter dimm 5 power 1
CVFD::showServicename: 
CVFD::ShowScrollText: [Neutrino starting...]
[neutrino start] 2128  ->  1421 ms
[frontend.cpp:Open:218] /dev/dvb/adapter0/frontend0: No such device
[frontend.cpp:Open:218] /dev/dvb/adapter0/frontend1: No such device
[frontend.cpp:Open:218] /dev/dvb/adapter0/frontend2: No such file or directory
[frontend.cpp:Open:218] /dev/dvb/adapter0/frontend3: No such file or directory
[femanager.cpp:Init:116] found 0 frontends, 4 demuxes

[femanager.cpp:getFE:505] Frontend #0 not found
[LT:007d9bd0:video ] #0: openDevice cannot open /dev/dvb/adapter0/video0: No such device, retries 0
[LT:007d9bd0:video ] #0: openDevice cannot open /dev/dvb/adapter0/video0: No such device, retries 0
[LT:007d3e68:audio ] openDevice: open failed (No such device)
[ca_ci.cpp] GetInstancea
[neutrino start] 2147  ->  1532 ms
[neutrino start] 2154  ->  1532 ms
[neutrino VideoSettings] setupVideoSystem setup videosystem...
[LT:007d9bd0:video ] SetVideoSystem: old: '' new: '720p50'
[LT:00000000:video ] hdmi_out(0)
[LT:00000000:video ] hdmi_out(1)
[neutrino VideoSettings] setVideoSettings init video settings...
[LT:007d9bd0:video ] setAspectRatio: proc_put /proc/stb/video/aspect (Input/output error)
[neutrino start] 2164  ->  1548 ms
CRCInput::open: /dev/input/event0 fd 12
KEY: 160 - OK
****        30650 1 ****
[SEM] UP
KEY_PRESS - 160 1
1 key: 0160 value 1, translate: 0160 -ok-
++++           17 ms ++++
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.a
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
timerd startup, tid 836
KEY: 160 - OK
****          114 1 ****
++++           19 ms ++++
KEY_RELEASE - 160 00 1 1 CAUSE=Timeout
Segmentation fault
----          241 ms ----
[SEM] DOWN
showSinglePic /var/boot/error.mvi
VIDEO_SET_FORMAT failed (Bad file descriptor)
killall: showiframe: no process killed
[ca_ci.cpp] GetInstance
[ca_ci.cpp] cCA 2
failed to open /dev/dvb/adapter0/ci0 ->No such deviceIOCTL CA_RESET failed for slot 7918624
failed to open /dev/dvb/adapter0/ci1 ->No such deviceIOCTL CA_RESET failed for slot 7920288
>>> Neutrino (compiled Mar 21 2014 13:47:46) <<<
[neutrino] frameBuffer Instance created
libstb-hal debug options can be set by exporting HAL_DEBUG.
The following values (or bitwise OR combinations) are valid:
    component: audio   0x01
    component: video   0x02
    component: demux   0x04
    component: play    0x08
    component: power   0x10
    component: init    0x20
    component: ca      0x40
    component: record  0x80
    all components:    0xff
[LT:00000000:init  ] init_td_api begin, initialized=0, debug=0x00
[LT:00000000:init  ] init_td_api: ERROR open /dev/dvb/adapter0/demux0 (No such device)
[LT:00000000:init  ] init_td_api end
12288k video mem
CFrameBuffer::setMode avail: 12582912 active: 1
FB: 1280x720x32 line length 5120. Not using nevis GXA accelerator.
[neutrino] Software update enabled
[neutrino] set debuglevel: 0
[neutrino start] 2080  ->     2 ms
[LT:00000000:init  ] init_td_api begin, initialized=1, debug=0x00
[LT:00000000:init  ] init_td_api end
[neutrino start] 2085  ->     3 ms
[english.locale] missing entry: audioplayer.screensaver_dir
[english.locale] missing entry: menu.hint_audioplayer_screensaver_dir
[english.locale] missing entry: menu.hint_channellist_hdicon
[english.locale] missing entry: menu.hint_infobar_dotmatrix
[english.locale] missing entry: menu.hint_shairport
[english.locale] missing entry: miscsettings.infobar_dotmatrix_display
[english.locale] missing entry: parentallock.zaptime
[neutrino] config file /var/tuxbox/config/neutrino.conf is broken, using defaults
***************************** rec dir /hdd/movie timeshift dir /hdd/timeshift
[neutrino start] 2094  ->   980 ms
[neutrino.cpp] executing /var/tuxbox/config/deepstandby.off.
[neutrino CEC Settings] setCECSettings init CEC settings...
cannot read locale: No such file or directory
[neutrino start] 2111  ->  1000 ms
[neutrino] settings font file /usr/share/fonts/neutrino.ttf
[neutrino] font family Arial Narrow
[neutrino] font family Arial Narrow
[neutrino start] 2115  ->  1076 ms
[neutrino start] 2117  ->  1077 ms
[neutrino start] 2123  ->  1128 ms
CVFD::setlcdparameter dimm 5 power 1
CVFD::showServicename: 
CVFD::ShowScrollText: [Neutrino starting...]
[neutrino start] 2128  ->  1201 ms
[frontend.cpp:Open:218] /dev/dvb/adapter0/frontend0: No such device
[frontend.cpp:Open:218] /dev/dvb/adapter0/frontend1: No such device
[frontend.cpp:Open:218] /dev/dvb/adapter0/frontend2: No such file or directory
[frontend.cpp:Open:218] /dev/dvb/adapter0/frontend3: No such file or directory
[femanager.cpp:Init:116] found 0 frontends, 4 demuxes

[femanager.cpp:getFE:505] Frontend #0 not found
[LT:007d9bd0:video ] #0: openDevice cannot open /dev/dvb/adapter0/video0: No such device, retries 0
[LT:007d9bd0:video ] #0: openDevice cannot open /dev/dvb/adapter0/video0: No such device, retries 0
[LT:007d3e68:audio ] openDevice: open failed (No such device)
[ca_ci.cpp] GetInstance
[neutrino start] 2147  ->  1311 ms
[neutrino start] 2154  ->  1311 ms
[neutrino VideoSettings] setupVideoSystem setup videosystem...
[LT:007d9bd0:video ] SetVideoSystem: old: '' new: '720p50'
[LT:00000000:video ] hdmi_out(0)
[LT:00000000:video ] hdmi_out(1)
[neutrino VideoSettings] setVideoSettings init video settings...
[LT:007d9bd0:video ] setAspectRatio: proc_put /proc/stb/video/aspect (Input/output error)
[neutrino start] 2164  ->  1327 ms
CRCInput::open: /dev/input/event0 fd 12
Ghostbob
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 16
Registriert: Fr 7. Jun 2013, 21:20
Hat sich bedankt: 0
Danksagung erhalten: 1 Mal

Re: NMP UFS922 14.03.2014 fehlerhaft

#4

Beitrag von Ghostbob »

Info: Das Image ist vom 21.03 und auch fehlerhaft


Gruß

Ghostbob
Benutzeravatar
TangoCash
Moderator
Moderator
Beiträge: 964
Registriert: Di 19. Jul 2011, 22:13
Hat sich bedankt: 27 Mal
Danksagung erhalten: 144 Mal

Re: NMP UFS922 14.03.2014 fehlerhaft

#5

Beitrag von TangoCash »

Ghostbob hat geschrieben: insmod: can't insert '/lib/modules/avl2108.ko': invalid module format
insmod: can't insert '/lib/modules/stmdvb.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/player2.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/sth264pp.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/stmalloc.ko': unknown symbol in module, or unknown parameter
Da stimmt irgendwas mit den modulen nicht
Es gibt genau 10 Sorten von Leuten – nämlich diejenigen, die das binäre System verstehen, und diejenigen, die es nicht tun.

2B || !2B

5x Mutant HD51
1x VU+ Ultimo 4k
1x Edision Mio+ 4k
1x Mutant HD60
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13409
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: NMP UFS922 14.03.2014 fehlerhaft

#6

Beitrag von BPanther »

Dann hat wohl einer an den Modulen gefummelt, denn "invalid format" weist eigentlich auf eine falsche Kernelversion hin.

@TC: Kannst Du das Image mal bitte unverändert testen ob das bei Dir auch so aussieht?
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Ghostbob
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 16
Registriert: Fr 7. Jun 2013, 21:20
Hat sich bedankt: 0
Danksagung erhalten: 1 Mal

Re: NMP UFS922 14.03.2014 fehlerhaft

#7

Beitrag von Ghostbob »

Ich der aktuellen Version (24.03) ist immer noch fehlerhaft. Wird ein Log benötigt?


Ghostbob
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13409
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: NMP UFS922 14.03.2014 fehlerhaft

#8

Beitrag von BPanther »

Hast Du irgendwas am Image verändert? Es dürfen wie gesagt keine Module einfach getauscht werden, da sie sonst nicht zum Kernel passen.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Ghostbob
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 16
Registriert: Fr 7. Jun 2013, 21:20
Hat sich bedankt: 0
Danksagung erhalten: 1 Mal

Re: NMP UFS922 14.03.2014 fehlerhaft

#9

Beitrag von Ghostbob »

Nein, ich weiß auch nicht wie das geht.
Ich verwende normalerweise die online-update Funktion und flash per Hand bzw. USB die alte Version beim Fehlerfall danach drüber.

Gruß

Ghostbob
Zuletzt geändert von Ghostbob am Mi 26. Mär 2014, 17:16, insgesamt 1-mal geändert.
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13409
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: NMP UFS922 14.03.2014 fehlerhaft

#10

Beitrag von BPanther »

Dann hat wohl die UFS922 mit dem Kernel 212 und 213 Probleme. :-\
Ich baue mal eine 211er Kernel Version...

EDIT: rev6126 mit Kernel 211 hochgeladen (nicht per OnlineUpdate). Vielleicht funktioniert ja das...
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Benutzeravatar
TangoCash
Moderator
Moderator
Beiträge: 964
Registriert: Di 19. Jul 2011, 22:13
Hat sich bedankt: 27 Mal
Danksagung erhalten: 144 Mal

Re: NMP UFS922 14.03.2014 fehlerhaft

#11

Beitrag von TangoCash »

Sorry bin noch nicht zum testen gekommen, allerdings liegt es nicht am kernel hier rennt ne 212 ohne probleme
Es gibt genau 10 Sorten von Leuten – nämlich diejenigen, die das binäre System verstehen, und diejenigen, die es nicht tun.

2B || !2B

5x Mutant HD51
1x VU+ Ultimo 4k
1x Edision Mio+ 4k
1x Mutant HD60
Benutzeravatar
DboxOldie
Co-Admin
Co-Admin
Beiträge: 5421
Registriert: Sa 6. Aug 2011, 15:21
Hat sich bedankt: 79 Mal
Danksagung erhalten: 295 Mal

Re: NMP UFS922 14.03.2014 fehlerhaft

#12

Beitrag von DboxOldie »

Es wird ja das avl2108.ko beim Laden angemeckert, der Rest sind Folgefehler.

Ich hab mir mal das USB Image (rev7039) der ufs922 angeschaut.
Dies steht im avl2108.ko:

Code: Alles auswählen

vermagic=2.6.32.59_stm24_0211
und dies steht in der avl2108_platform.ko ( sowie in den anderen Modulen ) :

Code: Alles auswählen

vermagic=2.6.32.61_stm24_0213
Kann es sein das avl2108.ko als fertiges Modul reinkopiert wird ?
MfG DboxOldie

KEIN SUPPORT PER PN > Bitte das Forum benutzen und ins Wiki schauen

Bild
Benutzeravatar
TangoCash
Moderator
Moderator
Beiträge: 964
Registriert: Di 19. Jul 2011, 22:13
Hat sich bedankt: 27 Mal
Danksagung erhalten: 144 Mal

Re: NMP UFS922 14.03.2014 fehlerhaft

#13

Beitrag von TangoCash »

Sieht so aus. Wenn man aus der 211 per hexedit ein 213 macht sollte es rennen
Es gibt genau 10 Sorten von Leuten – nämlich diejenigen, die das binäre System verstehen, und diejenigen, die es nicht tun.

2B || !2B

5x Mutant HD51
1x VU+ Ultimo 4k
1x Edision Mio+ 4k
1x Mutant HD60
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13409
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: NMP UFS922 14.03.2014 fehlerhaft

#14

Beitrag von BPanther »

Tatsächlich, nur weiß ich jetzt nicht mehr, warum. Aber das wird sich zeigen, denn ich habe das 213er nochmal gebaut und hochgeladen.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
Ghostbob
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 16
Registriert: Fr 7. Jun 2013, 21:20
Hat sich bedankt: 0
Danksagung erhalten: 1 Mal

Re: NMP UFS922 14.03.2014 fehlerhaft

#15

Beitrag von Ghostbob »

231 getestet!
Leider nur anders.

Totale lange Bootzeit. Neutrino wird geladen bleibt gefühlte 5 MInuten auf den Display und danach keine Reaktion auf die Fernbedienung.Im Display steht zwar 3Sat aber kein Bild wird angezeigt.

Hier der Log:


Code: Alles auswählen

Board: STb7100-Mboard (MB411)  [29-bit mode]


U-Boot 1.3.1 (Oct 21 2009 - 15:59:46) - stm23-2008-06-03

DRAM:  64 MB
NOR:   16 MB
In:    serial
Out:   serial
Err:   serial
Serial 3 Intialized
VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD using PIC
Test Class : GetInstance()
Test Class : GetInstance()
RawBuffer.cpp at RawBuffer ,29
FD = 0
SWRecoveryHandler.cpp at Recover ,46
No Recovery Needed
End of testCpp
Hit any key to stop autoboot:  0 
Original bootargs = console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.1.100:192.168.1.1:192.168.1.1:255.255.255.0:kathrein:eth0:off mem=122m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000 
ethaddr = 00:D0:55:04:E1:E5

new Params = console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.1.100:192.168.1.1:192.168.1.1:255.255.255.0:kathrein:eth0:off mem=122m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000 stmmaceth=ethaddr:00:D0:55:04:E1:E5

## Booting image at a0040000 ...
   Image Name:   Linux-2.6.32.61_stm24_0213
   Created:      2014-03-26  12:42:22 UTC
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    1702238 Bytes =  1.6 MB
   Load Address: 84001000
   Entry Point:  84002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.1.100:192.168.1.1:192.168.1.1:255.255.255.0:kathrein:eth0:off mem=122m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000 stmmaceth=ethaddr:00:D0:55:04:E1:E5
 - 0x00000000 - 0 ...

INIT: version 2.86 booting
mount: /etc/mtab: Read-only file system
INIT: Entering runlevel: 3

kathrein login: BPanther-Image BASE-rev6126_HAL-rev584-exp-next_NMP-rev7039-exp-next
Mount /dev in tmpfs
Copying device nodes to /dev
Mounting local filesystems...
Cleaning /tmp.
Hostname: ufs922.
Starting portmap daemon....
Starting FTP server: vsftpd.
Setup DHCP for Network-Interface eth0
udhcpc (v1.22.1) started
Sending discover...
fp_control: SW Version 1.04
Model: ufs922
vBoxType: 3
Selected Model: Kathrein UFS922 frontpanel control utility
init
checkConfig
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM =     %H:%M:%S    
, WAKEUPDECREMENT  300
3
setbrightness: : Invalid argument
fp_control: SW Version 1.04
Model: ufs922
vBoxType: 3
Selected Model: Kathrein UFS922 frontpanel control utility
init
checkConfig
configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM =     %H:%M:%S    
, WAKEUPDECREMENT  300
4096+0 records in
4096+0 records out
4194304 bytes (4.0MB) copied, 0.068813 seconds, 58.1MB/s
copLoadFile (file /lib/firmware/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
Sending select for 192.168.1.178...
Lease of 192.168.1.178 obtained, lease time 3600
4096+0 records in
4096+0 records out
4194304 bytes (4.0MB) copied, 0.097335 seconds, 41.1MB/s
copLoadFile (file /lib/firmware/audio.elf)
route: SIOCDELRT: No such process
adding dns 192.168.1.1
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 5f00
seeking to 12320
seeking to 1aa20
seeking to 173100
seeking to 173138
seeking to 173170
seeking to 1b9058
seeking to 1b9060
seeking to 1b9068
seeking to 1b9070
seeking to 1d0920
seeking to 1d0a00
showSinglePic /var/boot/bootlogo.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
Model: ufs922
vBoxType: 3
Input device name: "TDT RC event driver"
Selected Remote: Kathrein UFS922 RemoteControl
RemoteControl Map:
               MEDIA - D5 - 226
             ARCHIVE - 46 - 361
                MENU - 54 - 139
                 RED - 6D - 398
               GREEN - 6E - 399
              YELLOW - 6F - 400
                BLUE - 70 - 401
                EXIT - 55 - 102
                TEXT - 3C - 388
                 EPG - CC - 365
              REWIND - 21 - 168
         FASTFORWARD - 20 - 208
                PLAY - 38 - 207
               PAUSE - 39 - 119
              RECORD - 37 - 167
                STOP - 31 - 128
             STANDBY - 0C - 116
                MUTE - 0D - 113
           CHANNELUP - 1E - 104
         CHANNELDOWN - 1F - 109
            VOLUMEUP - 10 - 115
          VOLUMEDOWN - 11 - 114
                INFO - 0F - 138
                  OK - 5C - 352
                  UP - 58 - 103
               RIGHT - 5B - 106
                DOWN - 59 - 108
                LEFT - 5A - 105
             0BUTTON - 00 -  11
             1BUTTON - 01 -   2
             2BUTTON - 02 -   3
             3BUTTON - 03 -   4
             4BUTTON - 04 -   5
             5BUTTON - 05 -   6
             6BUTTON - 06 -   7
             7BUTTON - 07 -   8
             8BUTTON - 08 -   9
             9BUTTON - 09 -  10
Frontpanel Map:
             FP_MENU - 80 - 139
             FP_EXIT - 0D - 102
               FP_OK - 04 - 352
       FP_WHEEL_LEFT - 0F - 103
      FP_WHEEL_RIGHT - 0E - 108
Supports Long KeyPress: 1
processComplex >
toggle 0, disable 0
period 120, delay 10
Using period=120 delay=10
[SEM] DOWN
[ca_ci.cpp] GetInstance
[ca_ci.cpp] cCA 2
>>> Neutrino (compiled Mar 26 2014 13:54:58) <<<
[neutrino] frameBuffer Instance created
libstb-hal debug options can be set by exporting HAL_DEBUG.
The following values (or bitwise OR combinations) are valid:
    component: audio   0x01
    component: video   0x02
    component: demux   0x04
    component: play    0x08
    component: power   0x10
    component: init    0x20
    component: ca      0x40
    component: record  0x80
    all components:    0xff
[LT:00000000:init  ] init_td_api begin, initialized=0, debug=0x00
[LT:00000000:init  ] init_td_api end
12288k video mem
CFrameBuffer::setMode avail: 12582912 active: 1
FB: 1280x720x32 line length 5120. Not using nevis GXA accelerator.
[neutrino] Software update enabled
[neutrino] set debuglevel: 0
[neutrino start] 2080  ->     2 ms
[LT:00000000:init  ] init_td_api begin, initialized=1, debug=0x00
[LT:00000000:init  ] init_td_api end
[neutrino start] 2085  ->     3 ms
[english.locale] missing entry: audioplayer.screensaver_dir
[english.locale] missing entry: menu.hint_audioplayer_screensaver_dir
[english.locale] missing entry: menu.hint_channellist_hdicon
[english.locale] missing entry: menu.hint_infobar_dotmatrix
[english.locale] missing entry: menu.hint_shairport
[english.locale] missing entry: miscsettings.infobar_dotmatrix_display
[english.locale] missing entry: parentallock.zaptime
***************************** rec dir /hdd/movie timeshift dir /hdd/timeshift
[neutrino start] 2094  ->  1020 ms
[neutrino.cpp] executing /var/tuxbox/config/deepstandby.off.
[neutrino CEC Settings] setCECSettings init CEC settings...
[deutsch.locale] superfluous entry: moviebrowser.yt_most_discussed
[deutsch.locale] superfluous entry: moviebrowser.yt_most_resent
[deutsch.locale] superfluous entry: moviebrowser.yt_most_responded
[deutsch.locale] superfluous entry: moviebrowser.yt_most_shared
[deutsch.locale] superfluous entry: satsetup.fastscan_prov_cd
[deutsch.locale] superfluous entry: satsetup.fastscan_prov_telesat
[deutsch.locale] superfluous entry: satsetup.fastscan_prov_tvv
[deutsch.locale] missing entry: menu.hint_shairport
[deutsch.locale] missing entry: moviebrowser.yt_most_popular_all_time
[deutsch.locale] missing entry: satsetup.fastscan_auto_diseqc
[deutsch.locale] missing entry: satsetup.fastscan_auto_diseqc_wait
[deutsch.locale] missing entry: satsetup.fastscan_prov_cd_hd
[deutsch.locale] missing entry: satsetup.fastscan_prov_cd_sd
[deutsch.locale] missing entry: satsetup.fastscan_prov_hda
[deutsch.locale] missing entry: satsetup.fastscan_prov_hello
[deutsch.locale] missing entry: satsetup.fastscan_prov_skylink_c
[deutsch.locale] missing entry: satsetup.fastscan_prov_skylink_s
[deutsch.locale] missing entry: satsetup.fastscan_prov_telesat_b
[deutsch.locale] missing entry: satsetup.fastscan_prov_telesat_l
[deutsch.locale] missing entry: satsetup.fastscan_prov_tvv_hd
[deutsch.locale] missing entry: satsetup.fastscan_prov_tvv_sd
[neutrino start] 2111  ->  1993 ms
[neutrino] settings font file /usr/share/fonts/neutrino.ttf
[neutrino] font family Arial Narrow
[neutrino] font family Arial Narrow
[neutrino start] 2115  ->  2067 ms
[neutrino start] 2117  ->  2068 ms
[neutrino start] 2123  ->  2293 ms
CVFD::setlcdparameter dimm 5 power 1
CVFD::showServicename: 
CVFD::ShowScrollText: [Neutrino wird gestartet...]
[neutrino start] 2128  ->  2366 ms
[frontend.cpp:Open:221] [fe0] /dev/dvb/adapter0/frontend0 fd 9 type 0
[femanager.cpp:Init:100] add fe 0
[frontend.cpp:Open:221] [fe1] /dev/dvb/adapter0/frontend1 fd 10 type 0
[femanager.cpp:Init:100] add fe 1
[frontend.cpp:Open:217] /dev/dvb/adapter0/frontend2: No such file or directory
[frontend.cpp:Open:217] /dev/dvb/adapter0/frontend3: No such file or directory
[femanager.cpp:Init:116] found 2 frontends, 4 demuxes

[ca_ci.cpp] GetInstance
[zapit] Loading services, channel size 220 ..
[getservices.cpp:LoadServices:747] Loading satellites...
[zapit] 1531 services loaded (1531)...
[zapit] service loading took: 1105 msec
[zapit] duplicate in all transponders: tp-id 2dc700c000030085 freq 11719000 rate 27500000 fec 3 pol 0
[getservices]: replacing 'Sky Sport News' (sid=0xf1): succeded.
[getservices]: replacing 'Sky Select 3' (sid=0x10f): succeded.
[getservices]: replacing 'Sky Bundesliga 3' (sid=0x110): succeded.
[getservices]: replacing 'Sky Sport 4' (sid=0x111): succeded.
[getservices]: replacing 'Sky Select 4' (sid=0x119): succeded.
[getservices]: replacing 'Sky Bundesliga 4' (sid=0x11a): succeded.
[getservices]: replacing 'Sky Sport 5' (sid=0x11b): succeded.
[getservices]: replacing 'Sky Select 5' (sid=0x123): succeded.
[getservices]: replacing 'Sky Bundesliga 5' (sid=0x124): succeded.
[getservices]: replacing 'Sky Sport 6' (sid=0x125): succeded.
[getservices]: replacing 'Sky Select 6' (sid=0x12d): succeded.
[getservices]: replacing 'Sky Bundesliga 6' (sid=0x12e): succeded.
[getservices]: replacing 'Sky Sport 7' (sid=0x12f): succeded.
[zapit] duplicate in all transponders: tp-id 2dee00c000110085 freq 11758000 rate 27500000 fec 3 pol 0
[getservices]: replacing 'Sky Select 7' (sid=0x137): succeded.
[getservices]: replacing 'Sky Bundesliga 7' (sid=0x138): succeded.
[getservices]: replacing 'Sky Sport 8' (sid=0x139): succeded.
[getservices]: replacing 'Sky Select 8' (sid=0x141): succeded.
[getservices]: replacing 'Sky Bundesliga 8' (sid=0x142): succeded.
[getservices]: replacing 'Sky Sport 9' (sid=0x143): succeded.
[getservices]: replacing 'Sky Select 9' (sid=0x14b): succeded.
[getservices]: replacing 'Sky Bundesliga 9' (sid=0x14c): succeded.
[getservices]: replacing 'Sky Sport 10' (sid=0x14d): succeded.
[getservices]: replacing 'Sky Select Event B' (sid=0x14e): succeded.
[zapit] duplicate in all transponders: tp-id 2e1500c000020085 freq 11797000 rate 27500000 fec 3 pol 0
[getservices]: replacing 'Sky Select 1' (sid=0xfb): succeded.
[getservices]: replacing 'Sky Bundesliga 10' (sid=0xfc): succeded.
[getservices]: replacing 'Sky Sport 11' (sid=0xfd): succeded.
[getservices]: replacing 'Sky Select Event A' (sid=0xfe): succeded.
[getservices]: replacing 'Sky Select 2' (sid=0x105): succeded.
[getservices]: replacing 'Sky Bundesliga 2' (sid=0x106): succeded.
[getservices]: replacing 'Sky Sport 3' (sid=0x107): succeded.
[zapit] duplicate in all transponders: tp-id 2f2600c000010085 freq 12070000 rate 27500000 fec 3 pol 0
[getservices]: replacing 'Blue Movie 1' (sid=0x159): succeded.
[getservices]: replacing 'Blue Movie 2' (sid=0x163): succeded.
[getservices]: replacing 'Blue Movie 3' (sid=0x16d): succeded.
[zapit] duplicate in all transponders: tp-id 301000c0000c0085 freq 12304000 rate 27500000 fec 18 pol 0
[getservices]: replacing 'Sky Sport News HD' (sid=0xf2): succeded.
[getservices]: replacing 'Sky Bundesliga HD 4' (sid=0x11f): succeded.
[getservices]: replacing 'Sky Sport HD 5' (sid=0x120): succeded.
[zapit.cpp:PrepareChannels:1074] LoadServices: success
[bouquets.cpp:parseBouquetsXml:367] reading bouquets from /var/tuxbox/config/zapit/bouquets.xml
[bouquets.cpp:parseBouquetsXml:433] total: 74 bouquets
[bouquets.cpp:parseBouquetsXml:367] reading bouquets from /var/tuxbox/config/zapit/ubouquets.xml
[bouquets.cpp:parseBouquetsXml:433] total: 89 bouquets
############## CBouquetManager::makeRemainingChannelsBouquet: numbers start at: tv 1 radio 1 ############
[zapit] bouquet loading took: 1824 msec
CServiceManager::SaveServices: total channels: 1531
CServiceManager::SaveServices: processed channels: 1531
[zapit.cpp:Start:2502] channels have been loaded succesfully
[zapit.cpp] diseqc type = 0
[femanager.cpp:loadSettings:241] load config for fe0
[femanager.cpp:loadSettings:241] load config for fe1
[femanager.cpp:linkFrontends:402] linking..
[femanager.cpp:linkFrontends:450] Frontend #0: is independent
[fe0] voltage 13
[fe0] tone off
[fe0] FE_SET_TONE took: 0 msec (min 0 max 0)
[frontend.cpp:setDiseqcType:937] fe0: NO_DISEQC
[frontend.cpp:Close:254] [fe1] close frontend fd 10
[fe1] tone off
[fe1] FE_SET_TONE took: 0 msec (min 0 max 0)
/var/tuxbox/config/zapit/audio.conf: No such file or directory
/var/tuxbox/config/zapit/volume.conf: No such file or directory
[ca_ci.cpp] SetInitMask param:3
[ca_ci.cpp] Start
[neutrino start] 2147  ->  8111 ms
[zapit] starting... tid 887
[neutrino start] 2154  ->  8113 ms
[zapit] sdt monitor started
[neutrino VideoSettings] setupVideoSystem setup videosystem...
[LT:007e4a88:video ] SetVideoSystem: video_system 7 (720p50) already set, skipping
[neutrino VideoSettings] setVideoSettings init video settings...
[neutrino start] 2164  ->  8128 ms
CRCInput::open: /dev/input/event0 fd 18
[zapit.cpp:leaveStandby:2345] standby 1 recording 0
[zapit.cpp:ZapIt:528] [zapit] zap to 3sat (bb84043700016d67 tp 2eb100c004370001)
[femanager.cpp:getFrontend:595] Check fe0: mode 1 locked 0 freq 0 TP 0 - channel freq 11953 TP 2eb100c004370001
[femanager.cpp:getFrontend:605] Selected fe: 0
[LT:00000000:demux ] SetSource(1, 0) => 0 to 0
[zapit.cpp:StopPlayBack:2278] standby 0 playing 0 forced 0
[LT:00000000:demux ] SetSource(0, 0) => 0 to 0
[fe0] sat pos 0 -> 192 motor pos 0 -> 0 usals off
[fe0] voltage 18
[fe0] tone on
[fe0] FE_SET_TONE took: 3 msec (min 0 max 3)
[fe0] tune to 11953000 DVB QPSK 3/4 H/L srate 27500000 (tuner 1353000 offset 10600000 timeout 4000)
[fe0] FE_SET_PROPERTY took: 0 msec (min 0 max 0)
[fe0] poll has event after: 0 msec (min 0 max 0)
[fe0] ############################## poll timeout, time: 4007 msec (min 0 max 4007)
[zapit] ZapIt:1 SCR retry tuning 3 after 199ms
[fe0] sat pos 0 -> 192 motor pos 0 -> 0 usals off
[fe0] tone off
[basicsocket] receive timed out.
[CBasicClient] receive failed: /tmp/zapit.sock
timerd startup, tid 889
[neutrino] g_info.has_fan: 1
FAN Speed 1
CStreamManager::Listen: on 31339, fd 19 (210944)
Starting STREAM thread keeper, tid 894
[yhttpd] Webserver nhttpd/3.4.0 (yhttpd_core/1.3.2) tid 893
[ 17:35:17.243 ] dvbsub_thread started
[ 17:35:17.245 ] cDvbSubtitleConverter: new converter
[ 17:35:17.247 ] reader_thread stopped
[LT:31200b50:demux ] Stop #0: not open!
17:35:17.248 [sectionsd] start
[sectionsd] Caching: 2 days, 2 hours Extended Text, max 10000 events, Events are old 2 hours after end time
[sectionsd] NTP: disabled, server time.fu-berlin.de, command ntpd -n -q -p 
[dvbsub @ 0x312004e0] Invalid extradata, subtitle streams may be combined!
17:35:17.256 [sectionsd] starting
SIevent size: 156
====> USING SLOW ADDEVENT. export 'NO_SLOW_ADDEVENT=1' to avoid <===
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
17:35:17.272 Add channel 0x0640013e3dba, mask 0xffffffffffff to NoDVBTimelist
17:35:17.272 Add channel 0x32c8013e3914, mask 0xffffffffffff to NoDVBTimelist
17:35:17.272 Add channel 0x1f40013e0ca5, mask 0xffffffffffff to NoDVBTimelist
17:35:17.273 Add channel 0x125000640010, mask 0xffffffffffff to NoDVBTimelist
17:35:17.291 timeThread::run:: starting, pid 873 (756483200)
[LT:0090fb30:demux ] _open: setting /dev/dvb/adapter0/demux0 to source 0
17:35:17.293 timeThread: Time set FAILED (enabled: ntp 0 dvb 0)
17:35:17.297 freeSatThread::run:: starting, pid 873 (858780800)
17:35:17.298 cnThread::run:: starting, pid 873 (850392192)
17:35:17.299 eitThread::run:: starting, pid 873 (842003584)
[neutrino start] 2267  -> 68551 ms
[ca_ci.cpp] GetInstance
[neutrino start] 2284  -> 68551 ms
[neutrino start] 2293  -> 68777 ms
[neutrino] menue setup
[neutrino] init menus...
[neutrino] mediaplayer menu instance created
[ca_ci.cpp] GetInstance
[ca_ci.cpp] GetNumberCISlots
[network config] Instance created
[neutrino] ScanSetup Instance created
[yhttpd] Webserver starting...
playback_libeplayer3.cpp:cPlayback
[mb]->refreshFilterList 20
[neutrino CMoviePlayerGui] Instance created...
[neutrino start] 2298  -> 69076 ms
[neutrino] registering as event client
[neutrino] had to wait 0 ms for timerd start...
CHDDDestExec: checking /sys/block/sda
CHDDDestExec: noise 254 sleep 0 /dev/sda

/dev/sda:
 setting standby to 0
 (off)
[neutrino start] 2332  -> 69114 ms
[ca_ci.cpp] GetInstance
[ca_ci.cpp] Ready param:1
[neutrino] Creating channels lists...
[neutrino] got 1339 TV and 192 RADIO channels
[neutrino] all channels took: 45 msec
[neutrino] created Astra 1KR/1L/1M/2C (19.2E) (192) bouquet with 1339 TV and 192 RADIO channels
[neutrino] sat took: 85 msec
[neutrino] sats took: 133 msec
[neutrino] got 74 TV and 29 RADIO bouquets
[neutrino] took: 139 msec
CNeutrinoApp::SetChannelMode 0 [tv]
[neutrino.cpp:SetChannelMode:1772] newmode 0 sort old -1 new 0
[neutrino.cpp:tvMode:3863] rezap 1 current mode 1
CVFD::showServicename: 
StopAutoRecord: autoshift 0
CNeutrinoApp::SetChannelMode 0 [tv]
[neutrino.cpp:SetChannelMode:1772] newmode 0 sort old -1 new 0
**************************** CChannelList::zapTo_ChannelID bb84043700016d67
**************************** CChannelList::zapToChannel me 0x89f610 Alle Kanäle tuned 268435455 new 3sat -> bb84043700016d67
StopAutoRecord: autoshift 0
CChannelList::adjustToChannelID me 0x89f610 [Alle Kanäle] list size 1339 channel_id bb84043700016d67
17:35:18.111 [sectionsd] commandserviceChanged: Service change to bb84043700016d67 demux #0
changeDMX: for 0x4e not ignored! even though real_pauseCounter> 0 (1)
changeDMX: for 0x50 not ignored! even though real_pauseCounter> 0 (1)
changeDMX: for 0x60 not ignored! even though real_pauseCounter> 0 (1)
17:35:18.113 timeThread: getting DVB time (isOpen 1)
[neutrino start] 2339  -> 69352 ms
################################## after all ##################################: 69371 msec
[neutrino] initialized everything
[CPlugins] could not find startup.cfg
[neutrino] StopSubtitles
KEY: 68 - CHANNELUP
****        81976 1 ****
[SEM] UP
KEY_PRESS - 68 1
++++            6 ms ++++
KEY: 68 - CHANNELUP
****          106 1 ****
++++           26 ms ++++
KEY_RELEASE - 68 00 1 1 CAUSE=Timeout
----          244 ms ----
[SEM] DOWN
KEY: 8B - MENU
****         2877 2 ****
[SEM] UP
KEY_PRESS - 8b 2
++++            6 ms ++++
KEY: 8B - MENU
****          106 2 ****
++++           26 ms ++++
KEY: 8B - MENU
****          106 2 ****
++++           28 ms ++++
KEY_RELEASE - 8b 00 2 2 CAUSE=Timeout
----          242 ms ----
[SEM] DOWN
KEY: 6D - CHANNELDOWN
****         1770 3 ****
[SEM] UP
KEY_PRESS - 6d 3
++++           10 ms ++++
KEY: 6D - CHANNELDOWN
****          106 3 ****
++++           27 ms ++++
KEY_RELEASE - 6d 00 3 3 CAUSE=Timeout
----          241 ms ----
[SEM] DOWN
KEY: 160 - FP_OK
****         6688 4 ****
[SEM] UP
KEY_PRESS - 160 4
++++            6 ms ++++
KEY: 160 - FP_OK
****           95 4 ****
++++           35 ms ++++
KEY_RELEASE - 160 00 4 4 CAUSE=Timeout
----          241 ms ----
[SEM] DOWN
gruß Ghostbob

Edit by Frankenstone: Bitte die Code Funktion nutzen oder das Log als txt File anhängen :wink:
Antworten

Zurück zu „UFS922 - FLASH“