How to install flash and of multi image on VU Duo 4k

Antworten
stazeb
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 9
Registriert: Fr 15. Nov 2013, 23:07
Hat sich bedankt: 0
Danksagung erhalten: 0

How to install flash and of multi image on VU Duo 4k

#1

Beitrag von stazeb »

Please have anybody manual how to install flash or multi image on VU Duo 4K?
How to use USB not HDD to run multiboot?

Thanks
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13409
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: How to install flash and of multi image on VU Duo 4k

#2

Beitrag von BPanther »

Just read VU+ MultiBoot. You can translate the page also with Google Translator in your language, here for DE->EN
As you can see at the thread, multiboot is using primary the flash, not from usb or hdd. USB/HDD can used for recording, backups or whatever you want.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
stazeb
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 9
Registriert: Fr 15. Nov 2013, 23:07
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: How to install flash and of multi image on VU Duo 4k

#3

Beitrag von stazeb »

Thank you very much 👍
stazeb
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 9
Registriert: Fr 15. Nov 2013, 23:07
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: How to install flash and of multi image on VU Duo 4k

#4

Beitrag von stazeb »

I have tried both version but I can not boot after installation in flash of Vu Duo 4K !!!
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13409
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: How to install flash and of multi image on VU Duo 4k

#5

Beitrag von BPanther »

I can not help with "Does not working/booting". Please write exactly what you have do. How do you flashing (USB with FAT, directory, files), which messages at the OLED while flashing and so on.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
stazeb
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 9
Registriert: Fr 15. Nov 2013, 23:07
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: How to install flash and of multi image on VU Duo 4k

#6

Beitrag von stazeb »

1. I have uzip the flash file to USB formatted as FAT32.
2. Connected to usb port rear of my VU Duo 4k.
3. Switch on receiver en push on/off button on front my receiver.
4. Upgrade started correct en flashed correct.
5. When I got message that the receiver will be rebooted after few seconds I have removed USB.
6. After reboot receiver stay for few minutes in reboot mode and nothing was changed on the screen.

I have repeat this procedure with USB in front and with zip file for multi. The result was same.

After that I got some problems with flashing BlackHole 3.0.9. With OpenPli went wel.
Benutzeravatar
BPanther
Administrator
Administrator
Beiträge: 13409
Registriert: Do 11. Jan 2007, 00:06
Wohnort: Berlin
Hat sich bedankt: 659 Mal
Danksagung erhalten: 1364 Mal
Kontaktdaten:

Re: How to install flash and of multi image on VU Duo 4k

#7

Beitrag von BPanther »

stazeb hat geschrieben: Mo 17. Feb 2020, 09:244. Upgrade started correct en flashed correct.
The OLED must show some messages about flashing ALL 4 Parts, 4x root and 4x kernel. If any missing, you have not read the Multiboot thread. The USB must contain at the first flash 4 images, can also the same but all 4 must exist at first flash because the partitions are not correct created. Thats 14 files...

Again (from google translator, small manual translation changes) from the thread:
New USB stick files for MultiBoot, flash all partitions at the same time, even with different images
- kernel1_auto.bin -> new kernel for MultiBoot
- kernel2_auto.bin -> like 1 (also use the neutrino kernel for E2 and not the one supplied by E2, otherwise the boot process hangs!)
- kernel3_auto.bin -> like 1 (also use the neutrino kernel for E2 and not the one supplied by E2, otherwise the boot process hangs!)
- kernel4_auto.bin -> like 1 (also use the neutrino kernel for E2 and not the one supplied by E2, otherwise the boot process hangs!)
- rootfs1.tar.bz2 -> Root request image 1
- rootfs2.tar.bz2 -> Root request image 2
- rootfs3.tar.bz2 -> Root request image 3
- rootfs4.tar.bz2 -> Root request image 4
- initrd_auto.bin -> the new one for "MultiBoot"
- splash_auto.bin -> optional, own picture
- reboot.update -> (0 byte dummy) - optional, automatic restart after update, not available for VU + ZERO 4K and VU + UNO 4K
- mkpart.update -> (0 byte dummy) - so that the new partitions are created
- rootfs.tar.bz2 -> (0 byte dummy) - for flashing
- kernel_auto.bin -> (0 byte dummy) - for flashing
- force.update -> (0 byte dummy) - Start the update directly from the USB stick, only required for VU + ZERO 4K and VU + UNO 4K as there is no power button

Important
When switching to Multiboot for the first time, ALL partitions must be flashed with an image, means all 4 rootfsX.tar.bz2 and kernelX_auto.bin must be exist.
Only then is it possible to flash the individual partitions.
MfG BPanther
KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.


Bild Bild
Thx udog für das Bild.
TV: Sony Bravia KDL-46HX755
Boxen mit NMP und Unicable2 (Jess):
SH4: 7x UFS910 (1W, 128MB), 1x UFS910 (14W, 64MB), 1x UFS912, 2x UFS913, 1x AV700, 1x AV7000, 1x AV7500 (DVB-S/C/T), 1x Edision Argus Pingulux, 1x Vizyon820HD
MIPS: 1x VU+DUO, 1x VU+DUO2, 1x DM8000, 1x DM800
ARM: 3x AX 4K HD51 (DVB-S/SX/C/T/T2), 1x VU+Solo4K (DVB-S/SX (FBC)/C/T/T2 (DUAL)), 1x VU+Duo4K (DVB-S/SX (FBC)/C (FBC)), 3x E4HD 4K Ultra (DVB-S/SX/C/T/T2)
ARM: 1x VU+Duo4KSE (DVB-S/SX (FBC)/C (FBC)), 1x VU+Ultimo4K (DVB-S/SX (FBC)/C (DUAL)), 1x VU+Uno4KSE (DVB-S/SX (FBC)/C (FBC)), 2x VU+Zero4K (DVB-S/SX)
stazeb
Registrierte Benutzer
Registrierte Benutzer
Beiträge: 9
Registriert: Fr 15. Nov 2013, 23:07
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: How to install flash and of multi image on VU Duo 4k

#8

Beitrag von stazeb »

Thanks again.
Antworten

Zurück zu „VU+ DUO 4K - Allgemeines“