stm24 image rev.3973 p171

[DboxOldie]

Honestly - I would recommend to delete this point of selection from the menu.
At all - why this selection should be necessary??? For enabling of making the wrong decisions?

I think you´ve learned that point, and you will never make a mistake there

In fact: It´s possible to disable the whole VFD, by downloading and using the Add On from Mr.Wayne.
Then simply blue > red : VFD is off, blue> red again : VFD works.

BTW. Thor: I´ve a fixed dish I can´t use this satelite

[henkka]

Thank You for all the kind support.

Despite of this that I'm really familiar with Kathy UFS910 on every point (including bad electrolyt capacitors etc...) and I can reanimate these Kathys from almost every condition,
this Neutrino image is new for me and thus very interesting.

I feel this image to be very nice and therefore I'm asking all kind of stupid questions what I can not find answer myself

[henkka]

Can please anyone to check reception of the Thor 0,8W satellite HD channels with latest stm24 image?

[BPanther]

Do you have try'd the options as I wrote before? I can't test Thor here, because I can ony test satellites beween 28.5°<->9° East (Selfsat H21D4, HH90 Rotor).

[henkka]

Do you have try'd the options as I wrote before? I can't test Thor here, because I can ony test satellites beween 28.5°<->9° East (Selfsat H21D4, HH90 Rotor).

Bad story,
I did install of the newest rev3997, stm24_0210, player 191 and then executed new satellite scan (before this enabled highSR =1), but it was seen that tuner does not see any Thor satellite HD transponders (reaction on the screen:"Channel not available").

Will try now with all possible tuner drivers selection step by step, but... something strange is here???
Why this image can receive all HD transmissions from other satellites, but not from Thor??? In the same time SD channels from Thor are OK ?

[henkka]

Do you have try'd the options as I wrote before? I can't test Thor here, because I can ony test satellites beween 28.5°<->9° East (Selfsat H21D4, HH90 Rotor).

Maybe some other member of our community can make a Thor HD channels reception test?
Let see...

[BPanther]

"Strange" is relative. The SD have "only" 28000 (e.g. 11804 V), maybe not too high than 27500 ("normal" SR), but the HD have 30000 (e.g. 11785 H). Some tuner and/or some drivers may have problems with SR > 27500.


EDIT: I have testet on 13° East the 10775 H with 29900 (Sky Italia), here is the SIG/SNR OK. Also SF1/2 HD etc. on 10971 H with SR 29700 are OK.

[henkka]

"Strange" is relative. The SD have "only" 28000 (e.g. 11804 V), maybe not too high than 27500 ("normal" SR), but the HD have 30000 (e.g. 11785 H). Some tuner and/or some drivers may have problems with SR > 27500.

I understand Your point.
I will make more detailed report about my findings concerning modulation method and SR.
Of course this will take some time.

But... on the same Kathy UFS910 box the image based on older stm22, was playing all these Thor HD channels with no problems ...
This image had a lot of other problems (freezing etc), therefore I decided to test newest available stm24 image.
Everything OK, except these damnet Thor HD channels....

It seems that e2 flash images from AAF have still some definite advantages (but here I mean only older AAF flash images for UFS910, newer AAF e2 flash images are not usable any more - too many "whistles and bells").
I do not like idea, that tuner with limited resources (as Kathy910) should be able to perform everything and be like "kitchen multi-unit"...
It would be nice to create reallly working satellite TV high speed linux HD image for good old UFS910,
I would like to do my best for this.

[BPanther]

BTW: The test at 13° East was with the default settings, no highSR active and with cx24116 (not v2).

Yes, older E2 images was better. The last here was the "Indian Summer" (first release, not the second). This runs good, the newer are "overloaded" with things, nobody needs this really (for the most is the PC better). In german we called this "Eierlegende Wollmilchsau", you the "kitchen multi-unit".

The v2 cx24116 is normally for the Hardware Revision 1.7a (opening the box needed, see Board of your UFS910, near CI Slots). SIG/SNR is lower with "v2", but stable with HW 1.7a. I hope you find the right option for the Thor problem.
BTW: highSR=2 is GIT default, but has some other problems (also camRoutung=on, highSR>0) like mount losts of usb devices. Cause that I have disabled camRouting and highSR at default.

[zilvershadow]

Hallo habe ich auch das gleiche Problem.
weiß auch nicht, wie ich das lösen kann.
Ich habe beide in die Stm 22 bei 24 stm