Smargo HD+

[Chester2]

dann bekomme ich dass:
der treiber ist bei mir schon die ganze zeit auf ein



Warning: keyword 'resolvedelay' in global section not recognized
Warning: keyword 'pidfile' in global section not recognized
2012/08/14 19:14:34 1824 296AB000 s >> OSCam << cardserver started version 1.00-unstable_svn-ymodv18-t24, build #0 (sh4-amino-linux)
2012/08/14 19:14:34 1824 296AB000 s version=1.00-unstable_svn-ymodv18-t24, build #0, system=sh4-amino-linux, nice=-2
2012/08/14 19:14:34 1824 296AB000 s client max. idle=660 sec, debug level=0
2012/08/14 19:14:34 1824 296AB000 s max. logsize=unlimited
2012/08/14 19:14:34 1824 296AB000 s client timeout=6000 ms, fallback timeout=3000 ms, cache delay=10 ms
2012/08/14 19:14:34 1824 296AB000 s auth size=17644
2012/08/14 19:14:34 1824 296AB000 s Cannot open file "/var/keys/oscam.services" (errno=2)
2012/08/14 19:14:34 1824 296AB000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/08/14 19:14:34 1824 296AB000 s signal handling initialized (type=sysv)
2012/08/14 19:14:34 1824 296AB000 s can't open file "/var/keys/oscam.srvid" (err=2), no service-id's loaded
2012/08/14 19:14:34 1824 296AB000 s can't open file "/var/keys/oscam.tiers" (err=2), no tier-id's loaded
2012/08/14 19:14:34 1824 296AB000 s can't open file "/var/keys/oscam.provid" (err=2), no provids's loaded
2012/08/14 19:14:34 1824 296AB000 s can't open file "/var/keys/oscam.ird" (errno=2) irdeto guessing not loaded
2012/08/14 19:14:34 1824 296AB000 s can't open file "/var/keys/oscam.keys" softcam keys not loaded
2012/08/14 19:14:34 1824 296AB000 s monitor: disabled
2012/08/14 19:14:34 1824 296AB000 s camd33: disabled
2012/08/14 19:14:34 1824 296AB000 s camd35: disabled
2012/08/14 19:14:34 1824 296AB000 s cs378x: disabled
2012/08/14 19:14:34 1824 296AB000 s newcamd: disabled
2012/08/14 19:14:34 1824 296AB000 s cccam: disabled
2012/08/14 19:14:34 1824 296AB000 s radegast: disabled
2012/08/14 19:14:34 1824 296AB000 s http thread started
2012/08/14 19:14:34 1824 296AB000 s creating thread for device /dev/ttyUSB0
2012/08/14 19:14:34 1824 296AB000 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/08/14 19:14:34 1824 296AB000 s waiting for local card init
2012/08/14 19:14:34 1824 2A6AB4C8 h HTTP Server listening on port 8888
2012/08/14 19:14:34 1824 2AEAB4C8 r reader thread started (thread=2AEAB4C8, label=hdplus, device=/dev/ttyUSB0, detect=cd, mhz=368, cardm
hz=357)
2012/08/14 19:14:37 1824 2AEAB4C8 r hdplus card detected
2012/08/14 19:14:40 1824 2AEAB4C8 r ATR: 00 00
2012/08/14 19:14:40 1824 2AEAB4C8 r ERROR: Could not read reader->convention
2012/08/14 19:14:40 1824 2AEAB4C8 r Error activating card.
2012/08/14 19:14:44 1824 2AEAB4C8 r ATR: 00 00
2012/08/14 19:14:44 1824 2AEAB4C8 r ERROR: Could not read reader->convention
2012/08/14 19:14:44 1824 2AEAB4C8 r Error activating card.
2012/08/14 19:14:49 1824 2AEAB4C8 r ATR: 00 00
2012/08/14 19:14:49 1824 2AEAB4C8 r ERROR: Could not read reader->convention
2012/08/14 19:14:49 1824 2AEAB4C8 r Error activating card.
2012/08/14 19:14:49 1824 2AEAB4C8 r card initializing error
2012/08/14 19:14:49 1824 296AB000 s init for all local cards done
2012/08/14 19:14:49 1824 296AB000 s anti cascading disabled
2012/08/14 19:14:49 1824 2B6AB4C8 c plain dvbapi-client granted (dvbapi, au=off)
2012/08/14 19:14:49 1824 2B6AB4C8 c dvbapi: can't open priority file /var/keys/oscam.dvbapi
2012/08/14 19:14:49 1824 2B6AB4C8 c dvbapi: found pmt file /tmp/pmt.tmp
2012/08/14 19:14:49 1824 2B6AB4C8 c dvbapi: new program number: 2EE3 (0000:2EE3 unknown)

[BPanther]

Der scheint Probleme zu haben mit dem ATR. Hast Du mal eine "normale" oscam-Version probiert? Zudem, die cardmhz ist falsch. Der Eintrag fehlt wohl noch in der server Datei.

[Chester2]

was ist atr ?

[DboxOldie]

Also bei mir geht das nur, wenn im Reader keine mhz und cardmhz drinstehen, der Smargo so eingestellt ist wie gepostet, und smargopatch = 1
Dann zeigt er beim Starten mhz=357 und auch cardmhz=357 an.
Dann kommt auch der ATR.

[BPanther]

368 und NICHT 357...
Problem wenn beide Werte fehlen: oscam spinnt meist rum und schraubt den Takt dann sogar auf 5Mhz hoch wenn man Pech hat, das muß ja nicht sein.

[DboxOldie]

Ne wenn ich da Werte eintrage, bekomme ich auf Fehler und Blödsinn beim ATR.
Der Smargo ist ja auf Fixed (3,69) und der smargopatch=1 besorgt den Rest.
Anders läuft meine HD02 Karte nicht.
Bei internen Reader sieht das anders aus....

[BPanther]

Hoffe das verwirrt jetzt Chester2 nicht...

Ich habe nichts am Smargo eingestellt, alles auf Standard belassen. Grund: So kann ich auch mal die Karte wechseln, ohne erst am PC wieder extra alles umstellen zu müssen.
Den Treiber ftdi_sio habe ich mir gespart, weil es geht ja auch ohne, wenn man den Reader mit seiner Serial anspricht. Spart noch nen paar Bytes Sepicher. Würde aber auch mit Treiber so funktionieren, hatte ich auch mal ausprobiert. Allerdings liegt es auch evtl. mit an der oscam Version. Ich benutze eine alte vom Februar (1.20-unstable_svn, Rev. 6356, nix Emu), neuere haben hier auch nur rumgezickt.

[Chester2]

jetzt hab ich das:

Warning: keyword 'resolvedelay' in global section not recognized
Warning: keyword 'pidfile' in global section not recognized
2012/08/14 19:57:23 1824 296AB000 s >> OSCam << cardserver started version 1.00-unstable_svn-ymodv18-t24, buil
d #0 (sh4-amino-linux)
2012/08/14 19:57:23 1824 296AB000 s version=1.00-unstable_svn-ymodv18-t24, build #0, system=sh4-amino-linux, ni
ce=-2
2012/08/14 19:57:23 1824 296AB000 s client max. idle=660 sec, debug level=0
2012/08/14 19:57:23 1824 296AB000 s max. logsize=unlimited
2012/08/14 19:57:23 1824 296AB000 s client timeout=6000 ms, fallback timeout=3000 ms, cache delay=10 ms
2012/08/14 19:57:23 1824 296AB000 s auth size=17644
2012/08/14 19:57:23 1824 296AB000 s Cannot open file "/var/keys/oscam.services" (errno=2)
2012/08/14 19:57:23 1824 296AB000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/08/14 19:57:23 1824 296AB000 s signal handling initialized (type=sysv)
2012/08/14 19:57:23 1824 296AB000 s can't open file "/var/keys/oscam.srvid" (err=2), no service-id's loaded
2012/08/14 19:57:23 1824 296AB000 s can't open file "/var/keys/oscam.tiers" (err=2), no tier-id's loaded
2012/08/14 19:57:23 1824 296AB000 s can't open file "/var/keys/oscam.provid" (err=2), no provids's loaded
2012/08/14 19:57:23 1824 296AB000 s can't open file "/var/keys/oscam.ird" (errno=2) irdeto guessing not loaded
2012/08/14 19:57:23 1824 296AB000 s can't open file "/var/keys/oscam.keys" softcam keys not loaded
2012/08/14 19:57:23 1824 296AB000 s monitor: disabled
2012/08/14 19:57:23 1824 296AB000 s camd33: disabled
2012/08/14 19:57:23 1824 296AB000 s camd35: disabled
2012/08/14 19:57:23 1824 296AB000 s cs378x: disabled
2012/08/14 19:57:23 1824 296AB000 s newcamd: disabled
2012/08/14 19:57:23 1824 296AB000 s cccam: disabled
2012/08/14 19:57:23 1824 296AB000 s radegast: disabled
2012/08/14 19:57:23 1824 296AB000 s http thread started
2012/08/14 19:57:23 1824 296AB000 s creating thread for device /dev/ttyUSB0
2012/08/14 19:57:23 1824 296AB000 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/08/14 19:57:23 1824 296AB000 s waiting for local card init
2012/08/14 19:57:23 1824 2AEAB4C8 r reader thread started (thread=2AEAB4C8, label=hdplus, device=/dev/ttyUSB0,
detect=cd, mhz=368, cardmhz=368)
2012/08/14 19:57:23 1824 2A6AB4C8 h HTTP Server listening on port 8888
2012/08/14 19:57:26 1824 2AEAB4C8 r hdplus card detected
2012/08/14 19:57:33 1824 2AEAB4C8 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 3
0 30 30 28
2012/08/14 19:57:35 1824 2AEAB4C8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2012/08/14 19:57:37 1824 2AEAB4C8 r detect native nagra card
2012/08/14 19:57:45 1824 2AEAB4C8 r card system not supported
2012/08/14 19:57:45 1824 2AEAB4C8 r Normal mode failed, reverting to Deprecated Mode
2012/08/14 19:57:52 1824 2AEAB4C8 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 3
0 30 30 28
2012/08/14 19:57:53 1824 2AEAB4C8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2012/08/14 19:57:56 1824 2AEAB4C8 r detect native nagra card
2012/08/14 19:58:04 1824 2AEAB4C8 r card system not supported
2012/08/14 19:58:04 1824 2AEAB4C8 r card initializing error
2012/08/14 19:58:04 1824 296AB000 s init for all local cards done
2012/08/14 19:58:04 1824 296AB000 s anti cascading disabled
2012/08/14 19:58:04 1824 2B6AB4C8 c plain dvbapi-client granted (dvbapi, au=off)
2012/08/14 19:58:04 1824 2B6AB4C8 c dvbapi: can't open priority file /var/keys/oscam.dvbapi
2012/08/14 19:58:04 1824 2B6AB4C8 c dvbapi: found pmt file /tmp/pmt.tmp
2012/08/14 19:58:05 1824 2B6AB4C8 c dvbapi: new program number: 2EE3 (0000:2EE3 unknown)

[BPanther]

2012/08/14 19:57:45 1824 2AEAB4C8 r card system not supported

Problem wohl doch die oscam-Version...

ATR (card init) ok, aber dann streikt oscam selbst...

[Chester2]

hab jetzt die runter geladen, oscam-svn6679-sh4-amino-webif-dvb-Distribution.tar.gz . kann ich die über das webif der kathi installieren?

[BPanther]

Nein, von Hand installieren/auspacken. Wobei Du aus dem Archiv nur die binary brauchst um die nach /var/emu zu packen, der Rest kann bleiben.

[Chester2]

hab jetzt das


Warning: keyword 'resolvedelay' in global section not recognized
Warning: keyword 'pidfile' in global section not recognized
2012/08/14 20:41:17 1824 296AB000 s >> OSCam << cardserver started version 1.00-
unstable_svn-ymodv18-t24, build #0 (sh4-amino-linux)
2012/08/14 20:41:17 1824 296AB000 s version=1.00-unstable_svn-ymodv18-t24, build
#0, system=sh4-amino-linux, nice=-2
2012/08/14 20:41:17 1824 296AB000 s client max. idle=660 sec, debug level=0
2012/08/14 20:41:17 1824 296AB000 s max. logsize=unlimited
2012/08/14 20:41:17 1824 296AB000 s client timeout=6000 ms, fallback timeout=3000
ms, cache delay=10 ms
2012/08/14 20:41:17 1824 296AB000 s auth size=17644
2012/08/14 20:41:17 1824 296AB000 s Cannot open file "/var/keys/oscam.services" (
errno=2)
2012/08/14 20:41:17 1824 296AB000 s userdb reloaded: 1 accounts loaded, 0 expired
, 0 disabled
2012/08/14 20:41:17 1824 296AB000 s signal handling initialized (type=sysv)
2012/08/14 20:41:17 1824 296AB000 s can't open file "/var/keys/oscam.srvid" (err=
2), no service-id's loaded
2012/08/14 20:41:17 1824 296AB000 s can't open file "/var/keys/oscam.tiers" (err=
2), no tier-id's loaded
2012/08/14 20:41:17 1824 296AB000 s can't open file "/var/keys/oscam.provid" (err
=2), no provids's loaded
2012/08/14 20:41:17 1824 296AB000 s can't open file "/var/keys/oscam.ird" (errno=
2) irdeto guessing not loaded
2012/08/14 20:41:17 1824 296AB000 s can't open file "/var/keys/oscam.keys" softca
m keys not loaded
2012/08/14 20:41:17 1824 296AB000 s monitor: disabled
2012/08/14 20:41:17 1824 296AB000 s camd33: disabled
2012/08/14 20:41:17 1824 296AB000 s camd35: disabled
2012/08/14 20:41:17 1824 296AB000 s cs378x: disabled
2012/08/14 20:41:17 1824 296AB000 s newcamd: disabled
2012/08/14 20:41:17 1824 296AB000 s cccam: disabled
2012/08/14 20:41:17 1824 296AB000 s radegast: disabled
2012/08/14 20:41:17 1824 296AB000 s http thread started
2012/08/14 20:41:17 1824 296AB000 s creating thread for device /dev/ttyUSB0
2012/08/14 20:41:17 1824 296AB000 s loadbalancer: can't read from file /tmp/.osca
m/stat
2012/08/14 20:41:17 1824 2AEAB4C8 r reader thread started (thread=2AEAB4C8, label
=readerextern, device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2012/08/14 20:41:17 1824 2A6AB4C8 h HTTP Server listening on port 8888
2012/08/14 20:41:17 1824 296AB000 s waiting for local card init
2012/08/14 20:41:20 1824 2AEAB4C8 r readerextern card detected
2012/08/14 20:41:27 1824 2AEAB4C8 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 4
1 53 50 31 38 30 20 4D 65 72 30 30 30 28
2012/08/14 20:41:29 1824 2AEAB4C8 r Maximum frequency for this card is formally 5
Mhz, clocking it to 3.68 Mhz
2012/08/14 20:41:31 1824 2AEAB4C8 r detect native nagra card
2012/08/14 20:41:39 1824 2AEAB4C8 r card system not supported
2012/08/14 20:41:39 1824 2AEAB4C8 r Normal mode failed, reverting to Deprecated M
ode
2012/08/14 20:41:47 1824 2AEAB4C8 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 4
1 53 50 31 38 30 20 4D 65 72 30 30 30 28
2012/08/14 20:41:48 1824 2AEAB4C8 r Maximum frequency for this card is formally 5
Mhz, clocking it to 3.68 Mhz
2012/08/14 20:41:50 1824 2AEAB4C8 r detect native nagra card
2012/08/14 20:41:58 1824 2AEAB4C8 r card system not supported
2012/08/14 20:41:58 1824 2AEAB4C8 r card initializing error
2012/08/14 20:41:59 1824 296AB000 s init for all local cards done
2012/08/14 20:41:59 1824 296AB000 s anti cascading disabled
2012/08/14 20:41:59 1824 2B6AB4C8 c plain dvbapi-client granted (dvbapi, au=on (1
reader))
2012/08/14 20:41:59 1824 2B6AB4C8 c dvbapi: can't open priority file /var/keys/os
cam.dvbapi
2012/08/14 20:41:59 1824 2B6AB4C8 c dvbapi: found pmt file /tmp/pmt.tmp
2012/08/14 20:41:59 1824 2B6AB4C8 c dvbapi: [ADD PID 0] CAID: 1830 ECM_PID:
1CAA PROVID: 000000
2012/08/14 20:41:59 1824 2B6AB4C8 c dvbapi: new program number: EF15 (1830:EF15 u
nknown)
2012/08/14 20:41:59 1824 2B6AB4C8 c dvbapi: try pids again #1
2012/08/14 20:41:59 1824 2B6AB4C8 c dvbapi (1830&000000/EF15/1CAA/0000/92:E90D/00
-00): rejected group (20 ms) (no matching reader)
2012/08/14 20:41:59 1824 2B6AB4C8 c dvbapi: try pids again #2
2012/08/14 20:41:59 1824 2B6AB4C8 c dvbapi (1830&000000/EF15/1CAA/0000/92:E90D/00
-00): rejected group (20 ms) (no matching reader)
2012/08/14 20:41:59 1824 2B6AB4C8 c dvbapi: try pids again #3
2012/08/14 20:41:59 1824 2B6AB4C8 c dvbapi: can't decode channel
2012/08/14 20:41:59 1824 2B6AB4C8 c dvbapi (1830&000000/EF15/1CAA/0000/92:E90D/00
-00): rejected group (21 ms) (no matching reader)
2012/08/14 20:42:07 1824 296AB000 s exit with signal 15
2012/08/14 20:42:07 1824 296AB000 s cardserver down
Terminated
ufs910:~# 2012/08/14 20:42:07 1824 296AB000 s thread 2B6AB4C8 killed!
2012/08/14 20:42:07 1824 296AB000 s killing reader readerextern
2012/08/14 20:42:08 1824 296AB000 s thread 2AEAB4C8 killed!

[DboxOldie]

Jo immer noch diese Version:

2012/08/14 20:41:17 1824 296AB000 s >> os-cam << cardserver started version 1.00-unstable_svn-ymodv18-t24, build #0 (sh4-amino-linux)

also nix anders.

Und probier mal aus´ne Raute vor den mhz Einträgen zu machen, denn oscam kann die Frequenz vom Reader per ftdi nicht ändern.

[Chester2]

hat nix gebracht....

[DboxOldie]

Was denn jetzt ? Auch die Binary tauschen nicht ? Beim letzten Log war es ja noch diese ymod Version.