multiboot image?

[milano77]

hi,
i have instaled Neutrino Version 3.7.7 VU+ ULTIMO 4K (MULTI) ok, the primary boot ------) neutrino boot1 all ok, but if i choose second boot on multiboot plugin, I can't go back to the first boot neutrino, or another.
i tested all image
openpli 7.1
openatv 6.2, 6.3, 6.4, 6.5
openvision 10.2

when i click on multiboot image selectorb i have black screen, or blue screen.........

can u explain me?

thank's

[BPanther]

Please describe how do you flash exactly the images (USB device, files and so on).

[milano77]

hi,
i just flash USB with ( vuultimo4k_multi_usb_rev18770-ddt ) and I just add rootfs.tar to the corresponding image like this:

rootfs2.tar ------------------) openpli
rootfs3.tar -----------------) openatv
rootfs4.tar ------------------) openvision.

thank's

[BPanther]

Do you have really all files at the usb device how described here? -> VU+ MultiBoot
Don't replace the kernel files at the usb devices, you must use the kernel from neutrino for each partition.
While flashing all 4 images you must see at the OLED the flashing messages of kernel part X and also root part X. This is important.

[milano77]

yes, I haven't changed anything, I just added the three( rootfs ) that correspond to the 3 respective images

rootfs2.tar ------------------) openpli
rootfs3.tar -----------------) openatv
rootfs4.tar ------------------) openvision.

[BPanther]

Then it must working. You can also replace the rootfs1 with a e2-root for testing. If this also not working, there is something wrong.
Please show me the vuultimo4k-directory with all files at the usb device. Use at Windows command line the dir command for the listing, because I will see the real filesizes.

[milano77]

ok,

Code: Alles auswählen

08/08/2020  10:53                38 imageversion
08/08/2020  10:53         9 039 448 initrd_auto.bin
08/08/2020  10:53                33 initrd_auto.bin.md5
08/08/2020  10:53         4 824 608 kernel1_auto.bin
08/08/2020  10:53                33 kernel1_auto.bin.md5
08/08/2020  10:53         4 824 608 kernel2_auto.bin
08/08/2020  10:53                33 kernel2_auto.bin.md5
08/08/2020  10:53         4 824 608 kernel3_auto.bin
08/08/2020  10:53                33 kernel3_auto.bin.md5
08/08/2020  10:53         4 824 608 kernel4_auto.bin
08/08/2020  10:53                33 kernel4_auto.bin.md5
08/08/2020  10:53                18 kernel_auto.bin
08/08/2020  10:53                38 mkpart.update
08/08/2020  10:53                44 reboot.update
08/08/2020  10:53                18 rootfs.tar.bz2
31/08/2020  18:21        36 369 134 rootfs1.tar.bz2
08/08/2020  10:53                33 rootfs1.tar.bz2.md5
26/08/2020  22:42       304 496 719 rootfs2.tar.bz2
27/08/2020  21:45       121 482 815 rootfs3.tar.bz2
01/09/2020  23:02       133 585 656 rootfs4.tar.bz2
08/08/2020  10:53         1 036 854 splash_auto.bin
08/08/2020  10:53                33 splash_auto.bin.md5

[BPanther]

Hmm, the files sizes of the original files seems to be OK. I hope you have wait a few minutes at the first boot of e2, because e2 needs more time.

Do you have a serial cable (RJ12 to RS232 or USB) for the ultimo4k? Maybe there is more to see why its not working.

You have sayd Neutrino is working at Part 1. You can also flash the other images again for the other partitions manually via Telnet with ofgwrite.

ofgwrite -mX /path_to_kernel_autoX.bin_and_rootfsX.tar.bz2

X = Partition number

Example:
ofgwrite -m2 /hdd/oatv/

[milano77]

Ok,i test this afternoon.

Thanks m8.

[milano77]

now everything is ok,
you just had to install the ENIGMA2 pluginSTB-STARTUP-1.03, and put.

Code: Alles auswählen

/ dev / mmcblk0p1 / auto boot defaults 1 1

on etc / fstab.
is the turn, I was misled by the image menu e2 (multiboot image selector) which does not work.

thanks to BPanther.

[milano77]

Yes, this is the only way for switching to other partitions because E2 has not really a Multiboot for VU+.

[milano77]

Yes, thanks for all.
I have on m'y box :

STARTUP_1 ------) NEUTRINO
STARTUP_2 ------)OPEN ATV 6.4
STARTUP_3 -------) OPEN ATV 6.5
STARTUP_4 --------) OPEN VISION 10.2


ALL IS ok.