BPanther hat geschrieben: ↑Mo 20. Mai 2024, 12:10
Ahh, there was something missing.
What I miss is the question for the change of the sh to bash link. Or your linux has already sh linked to bash.
But now should the image build.
screenshot (1).png
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Folgende Benutzer bedankten sich beim Autor atef 0 für den Beitrag (Insgesamt 2):
BPanther (Mo 20. Mai 2024, 13:32) • zozman (Mo 20. Mai 2024, 15:14)
The creepy box is now here, but there a many problems...
1. A serial log is possible, but only until
INIT: version 3.09 booting
INIT: Entering runlevel: 3
Then no in/output possible. I can't reach the box via serial. Only at rescue mode the serial connection works normal.
Because there is no "BIOS" for some settings available - the old DM800/0 have this with the second stage bootloader - so i can't change the boot source (flash/sdX) and not set manually a ip.
2. The kernel will not be updated with flashing the tar.xz, only root. The kernel seems to be hidden in flash0.kernel partition.
3. I have also the black screen at first start, but only if SD channel. On HD channel theres a picture, but no OSD menu. With MENU - 1 - 3 a neutrino restart and the screen works complete.
Folgende Benutzer bedankten sich beim Autor BPanther für den Beitrag (Insgesamt 2):
atef 0 (Di 21. Mai 2024, 15:54) • zozman (Di 21. Mai 2024, 20:10)
Bewertung: 14.29%
MfG BPanther KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Note that the devices whose bios can be accessed
It is in blue and has a hidden link
Devices whose bios cannot be accessed are black and do not have a hidden link
Folgende Benutzer bedankten sich beim Autor atef 0 für den Beitrag:
There is a problem with the kernel, not working. I have flashed the kernel manually via rescue mode (seems the only way) and the box wont boot. If I flash the org. kernel of the last DM Image, the box booting. This may be a problem...
Folgende Benutzer bedankten sich beim Autor BPanther für den Beitrag (Insgesamt 2):
zozman (Di 21. Mai 2024, 20:13) • atef 0 (Di 21. Mai 2024, 23:19)
Bewertung: 14.29%
MfG BPanther KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
Why don't you try the images on the external flash first, and after making sure the image works, put it on the internal flash
---------------------------
You need a 16 GB flash disk
Formatted with FAT32 file system
barryallen plugin is attached, in addition to the installation instructions
atef 0 hat geschrieben: ↑Di 21. Mai 2024, 20:44Why don't you try the images on the external flash first, and after making sure the image works, put it on the internal flash
Hmm, semms no different between both, because the kernel may always loading from flash. And also the kernel from oatv does not working. Start is OK, but then nothing.
Thanks for the links, I'll try it later...
Folgende Benutzer bedankten sich beim Autor BPanther für den Beitrag:
The 2 biggest problems still not fixed (kernel and start problem of neutrino) - but some small parts now fixed.
- online/offline update working (only lokal, not for GIT)
- oled now working for messages outside of neutrino, booting etc.
- fix event device for the tools/plugins (sysinfo, tuxcom etc.)
and some other more...
dm820_boxinfo.png
dm820_imginfo.png
dm820_techinfo.png
dm820_sysinfo.png
dm820_streaming.png
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Folgende Benutzer bedankten sich beim Autor BPanther für den Beitrag (Insgesamt 2):
atef 0 (Mi 22. Mai 2024, 18:17) • zozman (Mi 22. Mai 2024, 19:43)
Bewertung: 14.29%
MfG BPanther KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
There is an other problem. If you try a H265/HEVC stream -> freezing of neutrino. killall -9 neutrino in telnet works - or if my image [OK] and 4-8x [MUTE].
Folgende Benutzer bedankten sich beim Autor BPanther für den Beitrag (Insgesamt 2):
zozman (Mi 22. Mai 2024, 19:43) • atef 0 (Mi 22. Mai 2024, 19:49)
Bewertung: 14.29%
MfG BPanther KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.
BPanther hat geschrieben: ↑Mi 22. Mai 2024, 18:29
There is an other problem. If you try a H265/HEVC stream -> freezing of neutrino. killall -9 neutrino in telnet works - or if my image [OK] and 4-8x [MUTE].
Strange, my neutrino does not freeze on the H265/HEVC stream video codec
Screenshot_2024-05-22_22-20-20.png
Screenshot_2024-05-22_22-34-42.png
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Folgende Benutzer bedankten sich beim Autor atef 0 für den Beitrag:
This is not the same and runs not directly via neutrino. A WebIf stream is a "pass through", no relevant internal functions are used, the stream is 1:1 transmitted.
Folgende Benutzer bedankten sich beim Autor BPanther für den Beitrag (Insgesamt 2):
zozman (Mi 22. Mai 2024, 19:44) • atef 0 (Mi 22. Mai 2024, 19:49)
Bewertung: 14.29%
MfG BPanther KEIN SUPPORT PER PN -> Bitte das Forum nutzen und das Wiki lesen.