Wlan UFS910

[checkersky]

hier ist der log:


ufs910:~# /usr/sbin/wpa_supplicant -Dwext -ira0 -c/etc/wpa_supplicant/wpa_sup p
icant.conf -dd
Initializing interface 'ra0' conf '/etc/wpa_supplicant/wpa_sup' driver 'wext' c
rl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/wpa_sup' -> '/etc/wpa_supplicant/wpa_su
'
Reading configuration file '/etc/wpa_supplicant/wpa_sup'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
ap_scan=1
Line: 6 - start of a new network block
ssid - hexdump_ascii(len=8):
46 55 43 4b 5f 59 4f 55 FUCK_YOU
proto: 0x2
key_mgmt: 0x2
pairwise: 0x10
group: 0x8
PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='FUCK_YOU'
Initializing interface (2) 'ra0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCSIFFLAGS: Operation not permitted
Could not set interface 'ra0' UP
SIOCGIWRANGE: WE(compiled)=22 WE(source)=14 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:00:00:00:00:00
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Using existing control interface directory.
ctrl_iface bind(PF_UNIX) failed: Address already in use
ctrl_iface exists and seems to be in use - cannot override it
Delete '/var/run/wpa_supplicant/ra0' manually if it is not used anymore
Failed to initialize control interface '/var/run/wpa_supplicant'.
You may have another wpa_supplicant process already running or the file was
left by an unclean termination of wpa_supplicant in which case you will need
to manually remove this file before starting wpa_supplicant again.

Failed to add interface ra0
State: DISCONNECTED -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
WEXT: Operstate: linkmode=0, operstate=6

[phillipsd2]

Hat das mit dem wlan denn noch geklappt?

Mfg

[checkersky]

Hallo,

Nein leider nicht wir haben es geschafft das er nach ap's scannt aber leider hat der keine gefunden.
Finden müsste er aber auf jeden fall einen hier sind locker 3 .

Mehr ist nicht passiert


Mfg

[phillipsd2]

Hast du auch mal mit den werten in der wpa_sup gespielt? Also z.B. ap_scan=0 oder 2 statt 1 versucht?
Dann kannst du auch eapol_version=2 versuchen.
Oder versuch den Stick erstmal am Linux PC ob er da läuft.
Wenn er da läuft muss es ein anderes Problem mit dem Image sein.

Mfg

Edith sagt:

Ganz wichtig ist die passende dat Datei und sieh dir auch mal an was du da einstellen kannst.
Ich denke wenn da die richtigen Werte drin stehen sollte das auch laufen.

[BrechREiZ]

[...]
ctrl_iface bind(PF_UNIX) failed: Address already in use
ctrl_iface exists and seems to be in use - cannot override it
Delete '/var/run/wpa_supplicant/ra0' manually if it is not used anymore
Failed to initialize control interface '/var/run/wpa_supplicant'.
[...]

Läuft da im Hintergrund noch eine weitere wpa_supplicant Instanz?

[phillipsd2]

Ja lief wohl noch. Hatten das gestern im Chat und da gehen ja nur 200 Zeichen. er hat zwischendurch auch neugestartet.
Scheint aber noch nicht zu klappen.

Mfg

[checkersky]

hier der aktuelle stand:

Reading configuration file '/etc/wpa_supplicant/wpa_sup'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
ap_scan=1
Line: 6 - start of a new network block
ssid - hexdump_ascii(len=8):
46 55 43 4b 5f 59 4f 55 FUCK_YOU
proto: 0x2
key_mgmt: 0x2
pairwise: 0x10
group: 0x10
PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='FUCK_YOU'
Initializing interface (2) 'ra0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
ioctl[SIOCSIWPMKSA]: Network is down
ioctl[SIOCSIWMODE]: Network is down
Could not configure driver to use managed mode
SIOCSIFFLAGS: Operation not permitted
Could not set interface 'ra0' UP
SIOCGIWRANGE: WE(compiled)=22 WE(source)=14 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:00:00:00:00:00
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Added interface ra0
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
RTM_NEWLINK, IFLA_IFNAME: Interface 'ra0' added
l2_packet_receive - recvfrom: Network is down
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed
up initial association
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
^X

^CCTRL-EVENT-TERMINATING - signal 2 received
Removing interface ra0
State: SCANNING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
WEXT: Operstate: linkmode=0, operstate=6
ufs910:~#

[checkersky]

so noch eins:

Reading configuration file '/etc/wpa_supplicant/wpa_sup'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
ap_scan=2
Line: 6 - start of a new network block
ssid - hexdump_ascii(len=8):
46 55 43 4b 5f 59 4f 55 FUCK_YOU
proto: 0x2
key_mgmt: 0x2
pairwise: 0x10
group: 0x10
PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='FUCK_YOU'
Initializing interface (2) 'ra0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCSIFFLAGS: Operation not permitted
Could not set interface 'ra0' UP
SIOCGIWRANGE: WE(compiled)=22 WE(source)=14 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:00:00:00:00:00
wpa_driver_wext_set_wpa
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
Setting scan request: 0 sec 100000 usec
Added interface ra0
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
RTM_NEWLINK, IFLA_IFNAME: Interface 'ra0' added
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
RTM_NEWLINK, IFLA_IFNAME: Interface 'ra0' added
l2_packet_receive - recvfrom: Network is down
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'FUCK_YOU'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00
0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
ioctl[SIOCSIWGENIE]: Operation not supported
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
RTM_NEWLINK, IFLA_IFNAME: Interface 'ra0' added
Wireless event: cmd=0x8b06 len=8
Authentication with 00:00:00:00:00:00 timed out.
Added BSSID 00:00:00:00:00:00 into blacklist
No keys have been configured - skip key clearing
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'FUCK_YOU'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00
0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
ioctl[SIOCSIWGENIE]: Operation not supported
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
RTM_NEWLINK, IFLA_IFNAME: Interface 'ra0' added
Wireless event: cmd=0x8b06 len=8
Authentication with 00:00:00:00:00:00 timed out.
BSSID 00:00:00:00:00:00 blacklist count incremented to 2
No keys have been configured - skip key clearing
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'FUCK_YOU'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00
0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
ioctl[SIOCSIWGENIE]: Operation not supported
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
RTM_NEWLINK, IFLA_IFNAME: Interface 'ra0' added
Wireless event: cmd=0x8b06 len=8
Authentication with 00:00:00:00:00:00 timed out.
BSSID 00:00:00:00:00:00 blacklist count incremented to 3
No keys have been configured - skip key clearing
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'FUCK_YOU'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00
0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
ioctl[SIOCSIWGENIE]: Operation not supported
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
RTM_NEWLINK, IFLA_IFNAME: Interface 'ra0' added
Wireless event: cmd=0x8b06 len=8
Authentication with 00:00:00:00:00:00 timed out.
BSSID 00:00:00:00:00:00 blacklist count incremented to 4
No keys have been configured - skip key clearing
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'FUCK_YOU'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00
0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
ioctl[SIOCSIWGENIE]: Operation not supported
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
RTM_NEWLINK, IFLA_IFNAME: Interface 'ra0' added
Wireless event: cmd=0x8b06 len=8
Authentication with 00:00:00:00:00:00 timed out.
BSSID 00:00:00:00:00:00 blacklist count incremented to 5
No keys have been configured - skip key clearing
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Setting scan request: 0 sec 0 usec
State: DISCONNECTED -> SCANNING
Trying to associate with SSID 'FUCK_YOU'
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: No WPA/RSN IE available from association info
WPA: Set cipher suites based on configuration
WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
WPA: clearing AP WPA IE
WPA: clearing AP RSN IE
WPA: using GTK CCMP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00
0f ac 04 01 00 00 0f ac 02 00 00
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
wpa_driver_wext_associate
ioctl[SIOCSIWGENIE]: Operation not supported
Association request to the driver failed
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
RTM_NEWLINK, IFLA_IFNAME: Interface 'ra0' added
Wireless event: cmd=0x8b06 len=8
^CCTRL-EVENT-TERMINATING - signal 2 received
Removing interface ra0
State: ASSOCIATING -> DISCONNECTED
wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT)
WEXT: Operstate: linkmode=-1, operstate=5
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_wext_set_wpa
wpa_driver_wext_set_drop_unencrypted
wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - No keys have been configured - skip key clearing
Removed BSSID 00:00:00:00:00:00 from blacklist (clear)
Cancelling scan request
Cancelling authentication timeout
WEXT: Operstate: linkmode=0, operstate=6
ufs910:~#



was mich etwas wundern ist: Own MAC address: 00:00:00:00:00:00
der stick habe ich am meinem win7 rechner getestet der geht einwandfrei.

mfg

[phillipsd2]

http://ubuntuforums.org/showthread.php?t=1285828

Hier nochmal ein Link mit Infos leider auf Englisch.

[BrechREiZ]

Die Probleme gehn hier schon los:

Code: Alles auswählen

SIOCSIFFLAGS: Operation not permitted
Could not set interface 'ra0' UP

Die ganze WPA Config kannst du erstmal ignorieren so lange du anscheinend noch Treiber Probleme hast.

Fehlt da vielleicht noch eine Firmware?

[BPanther]

Die Firmware selbst ist in der ko bereits enthalten (siehe source, firmware.h).

[phillipsd2]

Versuch es mal mit:
wpa_supplicant -Dnl80211 -ira0 -c/etc/wpa_supplicant/wpa_sup -d

Kann sein dass er mit dem wext nicht so richtig kann. Habe ubuntu 12.04 aufgesetzt und da will er auch nicht mehr mit wext dafür aber mit nl80211.
Weiß der Geier wieso!

Mfg

[checkersky]

hi,

geht leider auch nicht:

ufs910:~# wpa_supplicant -Dnl80211 -ira0 -c/etc/wpa_supplicant/wpa_sup -d
Initializing interface 'ra0' conf '/etc/wpa_supplicant/wpa_sup' driver 'nl80211'
ctrl_interface 'N/A' bridge 'N/A'
Unsupported driver 'nl80211'.

Failed to add interface ra0
Cancelling scan request
Cancelling authentication timeout
ufs910:~#

[phillipsd2]

Hast du dir mal die .dat angesehen?
Ich hab jetzt noch nicht weiter nachgesehen aber werde mir mal eine ansehen die passen sollte.
Vielleicht finde ich ja noch was.
Wenn du nur wpa_supplicant aufrufst kannst du sehen was du noch für wext einsetzen kannst.

Mfg

Edith sagt:


# 1.) set NetworkType to "Adhoc" for using Adhoc-mode, otherwise using Infrastructure
# 2.) set Channel to "0" for auto-select on Infrastructure mode
# 3.) set SSID for connecting to your Accss-point.
# 4.) AuthMode can be "WEPAUTO", "OPEN", "SHARED", "WPAPSK", "WPA2PSK", "WPANONE"
# 5.) EncrypType can be "NONE", "WEP", "TKIP", "AES"
# for more information refer to the Readme file.

[checkersky]

ufs910:~# lsmod
Module Size Used by Tainted: P
simu_button 624 0
boxtype 384 0
ftdi_sio 21392 0
usbserial 13328 1 ftdi_sio
ntfs 172052 0
bpamem 1804 4
silencegen 592 0
platform 792 0 [permanent]
stmalloc 1724 0
sth264pp 4288 0
player2 390572 2 stmalloc,sth264pp
stmdvb 87300 24 player2
stmsysfs 29272 0
stm_monitor 5900 1 player2
pti 23696 1 stmdvb
cimax 3240 3 stmdvb
cx24116 5968 1 stmdvb
pseudocard 11372 2 player2,stmdvb
stm_v4l2 6632 1 stmdvb
p2div64 1056 2 player2,stm_monitor
ksound 9764 1 player2
mpeg2hw 3360 0
mmelog 1460 0
avs 23244 1 stmdvb
mme_host 23124 5 silencegen,player2,stm_monitor,mpeg2hw,mmelog
embxshm 19532 0
embxmailbox 5248 1 embxshm
embxshell 17884 3 mme_host,embxshm,embxmailbox
stmfb 37136 2 stmdvb
stmcore_display_stx7100 147432 4 player2,stmdvb,pseudocard
rt5370sta 472420 0
e2_proc 9980 2 player2,stmdvb
vfd 3000 0
ufs910:~#